Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta

More Options

• Similar
• Submit Audit
• Compare

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.10;

import {GPv2SafeERC20} from '../../../dependencies/gnosis/contracts/GPv2SafeERC20.sol';
import {SafeCast} from '../../../dependencies/openzeppelin/contracts/SafeCast.sol';
import {IERC20} from '../../../dependencies/openzeppelin/contracts/IERC20.sol';
import {IVariableDebtToken} from '../../../interfaces/IVariableDebtToken.sol';
import {IAToken} from '../../../interfaces/IAToken.sol';
import {UserConfiguration} from '../configuration/UserConfiguration.sol';
import {ReserveConfiguration} from '../configuration/ReserveConfiguration.sol';
import {DataTypes} from '../types/DataTypes.sol';
import {ValidationLogic} from './ValidationLogic.sol';
import {ReserveLogic} from './ReserveLogic.sol';
import {IsolationModeLogic} from './IsolationModeLogic.sol';

/**
 * @title BorrowLogic library
 * @author Aave
 * @notice Implements the base logic for all the actions related to borrowing
 */
library BorrowLogic {
  using ReserveLogic for DataTypes.ReserveCache;
  using ReserveLogic for DataTypes.ReserveData;
  using GPv2SafeERC20 for IERC20;
  using UserConfiguration for DataTypes.UserConfigurationMap;
  using ReserveConfiguration for DataTypes.ReserveConfigurationMap;
  using SafeCast for uint256;

  // See `IPool` for descriptions
  event Borrow(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    DataTypes.InterestRateMode interestRateMode,
    uint256 borrowRate,
    uint16 indexed referralCode
  );
  event Repay(
    address indexed reserve,
    address indexed user,
    address indexed repayer,
    uint256 amount,
    bool useATokens
  );
  event IsolationModeTotalDebtUpdated(address indexed asset, uint256 totalDebt);
  event ReserveUsedAsCollateralDisabled(address indexed reserve, address indexed user);

  /**
   * @notice Implements the borrow feature. Borrowing allows users that provided collateral to draw liquidity from the
   * Aave protocol proportionally to their collateralization power. For isolated positions, it also increases the
   * isolated debt.
   * @dev  Emits the `Borrow()` event
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @param eModeCategories The configuration of all the efficiency mode categories
   * @param userConfig The user configuration mapping that tracks the supplied/borrowed assets
   * @param params The additional parameters needed to execute the borrow function
   */
  function executeBorrow(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList,
    mapping(uint8 => DataTypes.EModeCategory) storage eModeCategories,
    DataTypes.UserConfigurationMap storage userConfig,
    DataTypes.ExecuteBorrowParams memory params
  ) external {
    DataTypes.ReserveData storage reserve = reservesData[params.asset];
    DataTypes.ReserveCache memory reserveCache = reserve.cache();

    reserve.updateState(reserveCache);

    (
      bool isolationModeActive,
      address isolationModeCollateralAddress,
      uint256 isolationModeDebtCeiling
    ) = userConfig.getIsolationModeState(reservesData, reservesList);

    ValidationLogic.validateBorrow(
      reservesData,
      reservesList,
      eModeCategories,
      DataTypes.ValidateBorrowParams({
        reserveCache: reserveCache,
        userConfig: userConfig,
        asset: params.asset,
        userAddress: params.onBehalfOf,
        amount: params.amount,
        interestRateMode: params.interestRateMode,
        reservesCount: params.reservesCount,
        oracle: params.oracle,
        userEModeCategory: params.userEModeCategory,
        priceOracleSentinel: params.priceOracleSentinel,
        isolationModeActive: isolationModeActive,
        isolationModeCollateralAddress: isolationModeCollateralAddress,
        isolationModeDebtCeiling: isolationModeDebtCeiling
      })
    );

    bool isFirstBorrowing = false;

    (isFirstBorrowing, reserveCache.nextScaledVariableDebt) = IVariableDebtToken(
      reserveCache.variableDebtTokenAddress
    ).mint(params.user, params.onBehalfOf, params.amount, reserveCache.nextVariableBorrowIndex);

    if (isFirstBorrowing) {
      userConfig.setBorrowing(reserve.id, true);
    }

    if (isolationModeActive) {
      uint256 nextIsolationModeTotalDebt = reservesData[isolationModeCollateralAddress]
        .isolationModeTotalDebt += (params.amount /
        10 **
          (reserveCache.reserveConfiguration.getDecimals() -
            ReserveConfiguration.DEBT_CEILING_DECIMALS)).toUint128();
      emit IsolationModeTotalDebtUpdated(
        isolationModeCollateralAddress,
        nextIsolationModeTotalDebt
      );
    }

    reserve.updateInterestRatesAndVirtualBalance(
      reserveCache,
      params.asset,
      0,
      params.releaseUnderlying ? params.amount : 0
    );

    if (params.releaseUnderlying) {
      IAToken(reserveCache.aTokenAddress).transferUnderlyingTo(params.user, params.amount);
    }

    emit Borrow(
      params.asset,
      params.user,
      params.onBehalfOf,
      params.amount,
      DataTypes.InterestRateMode.VARIABLE,
      reserve.currentVariableBorrowRate,
      params.referralCode
    );
  }

  /**
   * @notice Implements the repay feature. Repaying transfers the underlying back to the aToken and clears the
   * equivalent amount of debt for the user by burning the corresponding debt token. For isolated positions, it also
   * reduces the isolated debt.
   * @dev  Emits the `Repay()` event
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @param userConfig The user configuration mapping that tracks the supplied/borrowed assets
   * @param params The additional parameters needed to execute the repay function
   * @return The actual amount being repaid
   */
  function executeRepay(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList,
    DataTypes.UserConfigurationMap storage userConfig,
    DataTypes.ExecuteRepayParams memory params
  ) external returns (uint256) {
    DataTypes.ReserveData storage reserve = reservesData[params.asset];
    DataTypes.ReserveCache memory reserveCache = reserve.cache();
    reserve.updateState(reserveCache);

    uint256 variableDebt = IERC20(reserveCache.variableDebtTokenAddress).balanceOf(
      params.onBehalfOf
    );

    ValidationLogic.validateRepay(
      reserveCache,
      params.amount,
      params.interestRateMode,
      params.onBehalfOf,
      variableDebt
    );

    uint256 paybackAmount = variableDebt;

    // Allows a user to repay with aTokens without leaving dust from interest.
    if (params.useATokens && params.amount == type(uint256).max) {
      params.amount = IAToken(reserveCache.aTokenAddress).balanceOf(msg.sender);
    }

    if (params.amount < paybackAmount) {
      paybackAmount = params.amount;
    }

    reserveCache.nextScaledVariableDebt = IVariableDebtToken(reserveCache.variableDebtTokenAddress)
      .burn(params.onBehalfOf, paybackAmount, reserveCache.nextVariableBorrowIndex);

    reserve.updateInterestRatesAndVirtualBalance(
      reserveCache,
      params.asset,
      params.useATokens ? 0 : paybackAmount,
      0
    );

    if (variableDebt - paybackAmount == 0) {
      userConfig.setBorrowing(reserve.id, false);
    }

    IsolationModeLogic.updateIsolatedDebtIfIsolated(
      reservesData,
      reservesList,
      userConfig,
      reserveCache,
      paybackAmount
    );

    // in case of aToken repayment the msg.sender must always repay on behalf of itself
    if (params.useATokens) {
      IAToken(reserveCache.aTokenAddress).burn(
        msg.sender,
        reserveCache.aTokenAddress,
        paybackAmount,
        reserveCache.nextLiquidityIndex
      );
      bool isCollateral = userConfig.isUsingAsCollateral(reserve.id);
      if (isCollateral && IAToken(reserveCache.aTokenAddress).scaledBalanceOf(msg.sender) == 0) {
        userConfig.setUsingAsCollateral(reserve.id, false);
        emit ReserveUsedAsCollateralDisabled(params.asset, msg.sender);
      }
    } else {
      IERC20(params.asset).safeTransferFrom(msg.sender, reserveCache.aTokenAddress, paybackAmount);
      IAToken(reserveCache.aTokenAddress).handleRepayment(
        msg.sender,
        params.onBehalfOf,
        paybackAmount
      );
    }

    emit Repay(params.asset, params.onBehalfOf, msg.sender, paybackAmount, params.useATokens);

    return paybackAmount;
  }
}

// SPDX-License-Identifier: LGPL-3.0-or-later
pragma solidity ^0.8.10;

import {IERC20} from '../../openzeppelin/contracts/IERC20.sol';

/// @title Gnosis Protocol v2 Safe ERC20 Transfer Library
/// @author Gnosis Developers
/// @dev Gas-efficient version of Openzeppelin's SafeERC20 contract.
library GPv2SafeERC20 {
  /// @dev Wrapper around a call to the ERC20 function `transfer` that reverts
  /// also when the token returns `false`.
  function safeTransfer(IERC20 token, address to, uint256 value) internal {
    bytes4 selector_ = token.transfer.selector;

    // solhint-disable-next-line no-inline-assembly
    assembly {
      let freeMemoryPointer := mload(0x40)
      mstore(freeMemoryPointer, selector_)
      mstore(add(freeMemoryPointer, 4), and(to, 0xffffffffffffffffffffffffffffffffffffffff))
      mstore(add(freeMemoryPointer, 36), value)

      if iszero(call(gas(), token, 0, freeMemoryPointer, 68, 0, 0)) {
        returndatacopy(0, 0, returndatasize())
        revert(0, returndatasize())
      }
    }

    require(getLastTransferResult(token), 'GPv2: failed transfer');
  }

  /// @dev Wrapper around a call to the ERC20 function `transferFrom` that
  /// reverts also when the token returns `false`.
  function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
    bytes4 selector_ = token.transferFrom.selector;

    // solhint-disable-next-line no-inline-assembly
    assembly {
      let freeMemoryPointer := mload(0x40)
      mstore(freeMemoryPointer, selector_)
      mstore(add(freeMemoryPointer, 4), and(from, 0xffffffffffffffffffffffffffffffffffffffff))
      mstore(add(freeMemoryPointer, 36), and(to, 0xffffffffffffffffffffffffffffffffffffffff))
      mstore(add(freeMemoryPointer, 68), value)

      if iszero(call(gas(), token, 0, freeMemoryPointer, 100, 0, 0)) {
        returndatacopy(0, 0, returndatasize())
        revert(0, returndatasize())
      }
    }

    require(getLastTransferResult(token), 'GPv2: failed transferFrom');
  }

  /// @dev Verifies that the last return was a successful `transfer*` call.
  /// This is done by checking that the return data is either empty, or
  /// is a valid ABI encoded boolean.
  function getLastTransferResult(IERC20 token) private view returns (bool success) {
    // NOTE: Inspecting previous return data requires assembly. Note that
    // we write the return data to memory 0 in the case where the return
    // data size is 32, this is OK since the first 64 bytes of memory are
    // reserved by Solidy as a scratch space that can be used within
    // assembly blocks.
    // <https://docs.soliditylang.org/en/v0.7.6/internals/layout_in_memory.html>
    // solhint-disable-next-line no-inline-assembly
    assembly {
      /// @dev Revert with an ABI encoded Solidity error with a message
      /// that fits into 32-bytes.
      ///
      /// An ABI encoded Solidity error has the following memory layout:
      ///
      /// ------------+----------------------------------
      ///  byte range | value
      /// ------------+----------------------------------
      ///  0x00..0x04 |        selector("Error(string)")
      ///  0x04..0x24 |      string offset (always 0x20)
      ///  0x24..0x44 |                    string length
      ///  0x44..0x64 | string value, padded to 32-bytes
      function revertWithMessage(length, message) {
        mstore(0x00, '\x08\xc3\x79\xa0')
        mstore(0x04, 0x20)
        mstore(0x24, length)
        mstore(0x44, message)
        revert(0x00, 0x64)
      }

      switch returndatasize()
      // Non-standard ERC20 transfer without return.
      case 0 {
        // NOTE: When the return data size is 0, verify that there
        // is code at the address. This is done in order to maintain
        // compatibility with Solidity calling conventions.
        // <https://docs.soliditylang.org/en/v0.7.6/control-structures.html#external-function-calls>
        if iszero(extcodesize(token)) {
          revertWithMessage(20, 'GPv2: not a contract')
        }

        success := 1
      }
      // Standard ERC20 transfer returning boolean success value.
      case 32 {
        returndatacopy(0, 0, returndatasize())

        // NOTE: For ABI encoding v1, any non-zero value is accepted
        // as `true` for a boolean. In order to stay compatible with
        // OpenZeppelin's `SafeERC20` library which is known to work
        // with the existing ERC20 implementation we care about,
        // make sure we return success for any non-zero return value
        // from the `transfer*` call.
        success := iszero(iszero(mload(0)))
      }
      default {
        revertWithMessage(31, 'GPv2: malformed transfer result')
      }
    }
  }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)

pragma solidity ^0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
  /**
   * @dev Returns true if `account` is a contract.
   *
   * [IMPORTANT]
   * ====
   * It is unsafe to assume that an address for which this function returns
   * false is an externally-owned account (EOA) and not a contract.
   *
   * Among others, `isContract` will return false for the following
   * types of addresses:
   *
   *  - an externally-owned account
   *  - a contract in construction
   *  - an address where a contract will be created
   *  - an address where a contract lived, but was destroyed
   * ====
   */
  function isContract(address account) internal view returns (bool) {
    // This method relies on extcodesize, which returns 0 for contracts in
    // construction, since the code is only stored at the end of the
    // constructor execution.

    uint256 size;
    assembly {
      size := extcodesize(account)
    }
    return size > 0;
  }

  /**
   * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
   * `recipient`, forwarding all available gas and reverting on errors.
   *
   * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
   * of certain opcodes, possibly making contracts go over the 2300 gas limit
   * imposed by `transfer`, making them unable to receive funds via
   * `transfer`. {sendValue} removes this limitation.
   *
   * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
   *
   * IMPORTANT: because control is transferred to `recipient`, care must be
   * taken to not create reentrancy vulnerabilities. Consider using
   * {ReentrancyGuard} or the
   * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
   */
  function sendValue(address payable recipient, uint256 amount) internal {
    require(address(this).balance >= amount, 'Address: insufficient balance');

    (bool success, ) = recipient.call{value: amount}('');
    require(success, 'Address: unable to send value, recipient may have reverted');
  }

  /**
   * @dev Performs a Solidity function call using a low level `call`. A
   * plain `call` is an unsafe replacement for a function call: use this
   * function instead.
   *
   * If `target` reverts with a revert reason, it is bubbled up by this
   * function (like regular Solidity function calls).
   *
   * Returns the raw returned data. To convert to the expected return value,
   * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
   *
   * Requirements:
   *
   * - `target` must be a contract.
   * - calling `target` with `data` must not revert.
   *
   * _Available since v3.1._
   */
  function functionCall(address target, bytes memory data) internal returns (bytes memory) {
    return functionCall(target, data, 'Address: low-level call failed');
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
   * `errorMessage` as a fallback revert reason when `target` reverts.
   *
   * _Available since v3.1._
   */
  function functionCall(
    address target,
    bytes memory data,
    string memory errorMessage
  ) internal returns (bytes memory) {
    return functionCallWithValue(target, data, 0, errorMessage);
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
   * but also transferring `value` wei to `target`.
   *
   * Requirements:
   *
   * - the calling contract must have an ETH balance of at least `value`.
   * - the called Solidity function must be `payable`.
   *
   * _Available since v3.1._
   */
  function functionCallWithValue(
    address target,
    bytes memory data,
    uint256 value
  ) internal returns (bytes memory) {
    return functionCallWithValue(target, data, value, 'Address: low-level call with value failed');
  }

  /**
   * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
   * with `errorMessage` as a fallback revert reason when `target` reverts.
   *
   * _Available since v3.1._
   */
  function functionCallWithValue(
    address target,
    bytes memory data,
    uint256 value,
    string memory errorMessage
  ) internal returns (bytes memory) {
    require(address(this).balance >= value, 'Address: insufficient balance for call');
    require(isContract(target), 'Address: call to non-contract');

    (bool success, bytes memory returndata) = target.call{value: value}(data);
    return verifyCallResult(success, returndata, errorMessage);
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
   * but performing a static call.
   *
   * _Available since v3.3._
   */
  function functionStaticCall(
    address target,
    bytes memory data
  ) internal view returns (bytes memory) {
    return functionStaticCall(target, data, 'Address: low-level static call failed');
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
   * but performing a static call.
   *
   * _Available since v3.3._
   */
  function functionStaticCall(
    address target,
    bytes memory data,
    string memory errorMessage
  ) internal view returns (bytes memory) {
    require(isContract(target), 'Address: static call to non-contract');

    (bool success, bytes memory returndata) = target.staticcall(data);
    return verifyCallResult(success, returndata, errorMessage);
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
   * but performing a delegate call.
   *
   * _Available since v3.4._
   */
  function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
    return functionDelegateCall(target, data, 'Address: low-level delegate call failed');
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
   * but performing a delegate call.
   *
   * _Available since v3.4._
   */
  function functionDelegateCall(
    address target,
    bytes memory data,
    string memory errorMessage
  ) internal returns (bytes memory) {
    require(isContract(target), 'Address: delegate call to non-contract');

    (bool success, bytes memory returndata) = target.delegatecall(data);
    return verifyCallResult(success, returndata, errorMessage);
  }

  /**
   * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
   * revert reason using the provided one.
   *
   * _Available since v4.3._
   */
  function verifyCallResult(
    bool success,
    bytes memory returndata,
    string memory errorMessage
  ) internal pure returns (bytes memory) {
    if (success) {
      return returndata;
    } else {
      // Look for revert reason and bubble it up if present
      if (returndata.length > 0) {
        // The easiest way to bubble the revert reason is using memory via assembly

        assembly {
          let returndata_size := mload(returndata)
          revert(add(32, returndata), returndata_size)
        }
      } else {
        revert(errorMessage);
      }
    }
  }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.10;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
  function _msgSender() internal view virtual returns (address payable) {
    return payable(msg.sender);
  }

  function _msgData() internal view virtual returns (bytes memory) {
    this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
    return msg.data;
  }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.10;

/**
 * @dev External interface of AccessControl declared to support ERC165 detection.
 */
interface IAccessControl {
  /**
   * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
   *
   * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
   * {RoleAdminChanged} not being emitted signaling this.
   *
   * _Available since v3.1._
   */
  event RoleAdminChanged(
    bytes32 indexed role,
    bytes32 indexed previousAdminRole,
    bytes32 indexed newAdminRole
  );

  /**
   * @dev Emitted when `account` is granted `role`.
   *
   * `sender` is the account that originated the contract call, an admin role
   * bearer except when using {AccessControl-_setupRole}.
   */
  event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);

  /**
   * @dev Emitted when `account` is revoked `role`.
   *
   * `sender` is the account that originated the contract call:
   *   - if using `revokeRole`, it is the admin role bearer
   *   - if using `renounceRole`, it is the role bearer (i.e. `account`)
   */
  event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);

  /**
   * @dev Returns `true` if `account` has been granted `role`.
   */
  function hasRole(bytes32 role, address account) external view returns (bool);

  /**
   * @dev Returns the admin role that controls `role`. See {grantRole} and
   * {revokeRole}.
   *
   * To change a role's admin, use {AccessControl-_setRoleAdmin}.
   */
  function getRoleAdmin(bytes32 role) external view returns (bytes32);

  /**
   * @dev Grants `role` to `account`.
   *
   * If `account` had not been already granted `role`, emits a {RoleGranted}
   * event.
   *
   * Requirements:
   *
   * - the caller must have ``role``'s admin role.
   */
  function grantRole(bytes32 role, address account) external;

  /**
   * @dev Revokes `role` from `account`.
   *
   * If `account` had been granted `role`, emits a {RoleRevoked} event.
   *
   * Requirements:
   *
   * - the caller must have ``role``'s admin role.
   */
  function revokeRole(bytes32 role, address account) external;

  /**
   * @dev Revokes `role` from the calling account.
   *
   * Roles are often managed via {grantRole} and {revokeRole}: this function's
   * purpose is to provide a mechanism for accounts to lose their privileges
   * if they are compromised (such as when a trusted device is misplaced).
   *
   * If the calling account had been granted `role`, emits a {RoleRevoked}
   * event.
   *
   * Requirements:
   *
   * - the caller must be `account`.
   */
  function renounceRole(bytes32 role, address account) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
  /**
   * @dev Returns the amount of tokens in existence.
   */
  function totalSupply() external view returns (uint256);

  /**
   * @dev Returns the amount of tokens owned by `account`.
   */
  function balanceOf(address account) external view returns (uint256);

  /**
   * @dev Moves `amount` tokens from the caller's account to `recipient`.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transfer(address recipient, uint256 amount) external returns (bool);

  /**
   * @dev Returns the remaining number of tokens that `spender` will be
   * allowed to spend on behalf of `owner` through {transferFrom}. This is
   * zero by default.
   *
   * This value changes when {approve} or {transferFrom} are called.
   */
  function allowance(address owner, address spender) external view returns (uint256);

  /**
   * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * IMPORTANT: Beware that changing an allowance with this method brings the risk
   * that someone may use both the old and the new allowance by unfortunate
   * transaction ordering. One possible solution to mitigate this race
   * condition is to first reduce the spender's allowance to 0 and set the
   * desired value afterwards:
   * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
   *
   * Emits an {Approval} event.
   */
  function approve(address spender, uint256 amount) external returns (bool);

  /**
   * @dev Moves `amount` tokens from `sender` to `recipient` using the
   * allowance mechanism. `amount` is then deducted from the caller's
   * allowance.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

  /**
   * @dev Emitted when `value` tokens are moved from one account (`from`) to
   * another (`to`).
   *
   * Note that `value` may be zero.
   */
  event Transfer(address indexed from, address indexed to, uint256 value);

  /**
   * @dev Emitted when the allowance of a `spender` for an `owner` is set by
   * a call to {approve}. `value` is the new allowance.
   */
  event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.10;

import {IERC20} from './IERC20.sol';

interface IERC20Detailed is IERC20 {
  function name() external view returns (string memory);

  function symbol() external view returns (string memory);

  function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/math/SafeCast.sol)
pragma solidity ^0.8.10;

/**
 * @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow
 * checks.
 *
 * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
 * easily result in undesired exploitation or bugs, since developers usually
 * assume that overflows raise errors. `SafeCast` restores this intuition by
 * reverting the transaction when such an operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 *
 * Can be combined with {SafeMath} and {SignedSafeMath} to extend it to smaller types, by performing
 * all math on `uint256` and `int256` and then downcasting.
 */
library SafeCast {
  /**
   * @dev Returns the downcasted uint224 from uint256, reverting on
   * overflow (when the input is greater than largest uint224).
   *
   * Counterpart to Solidity's `uint224` operator.
   *
   * Requirements:
   *
   * - input must fit into 224 bits
   */
  function toUint224(uint256 value) internal pure returns (uint224) {
    require(value <= type(uint224).max, "SafeCast: value doesn't fit in 224 bits");
    return uint224(value);
  }

  /**
   * @dev Returns the downcasted uint128 from uint256, reverting on
   * overflow (when the input is greater than largest uint128).
   *
   * Counterpart to Solidity's `uint128` operator.
   *
   * Requirements:
   *
   * - input must fit into 128 bits
   */
  function toUint128(uint256 value) internal pure returns (uint128) {
    require(value <= type(uint128).max, "SafeCast: value doesn't fit in 128 bits");
    return uint128(value);
  }

  /**
   * @dev Returns the downcasted uint96 from uint256, reverting on
   * overflow (when the input is greater than largest uint96).
   *
   * Counterpart to Solidity's `uint96` operator.
   *
   * Requirements:
   *
   * - input must fit into 96 bits
   */
  function toUint96(uint256 value) internal pure returns (uint96) {
    require(value <= type(uint96).max, "SafeCast: value doesn't fit in 96 bits");
    return uint96(value);
  }

  /**
   * @dev Returns the downcasted uint64 from uint256, reverting on
   * overflow (when the input is greater than largest uint64).
   *
   * Counterpart to Solidity's `uint64` operator.
   *
   * Requirements:
   *
   * - input must fit into 64 bits
   */
  function toUint64(uint256 value) internal pure returns (uint64) {
    require(value <= type(uint64).max, "SafeCast: value doesn't fit in 64 bits");
    return uint64(value);
  }

  /**
   * @dev Returns the downcasted uint32 from uint256, reverting on
   * overflow (when the input is greater than largest uint32).
   *
   * Counterpart to Solidity's `uint32` operator.
   *
   * Requirements:
   *
   * - input must fit into 32 bits
   */
  function toUint32(uint256 value) internal pure returns (uint32) {
    require(value <= type(uint32).max, "SafeCast: value doesn't fit in 32 bits");
    return uint32(value);
  }

  /**
   * @dev Returns the downcasted uint16 from uint256, reverting on
   * overflow (when the input is greater than largest uint16).
   *
   * Counterpart to Solidity's `uint16` operator.
   *
   * Requirements:
   *
   * - input must fit into 16 bits
   */
  function toUint16(uint256 value) internal pure returns (uint16) {
    require(value <= type(uint16).max, "SafeCast: value doesn't fit in 16 bits");
    return uint16(value);
  }

  /**
   * @dev Returns the downcasted uint8 from uint256, reverting on
   * overflow (when the input is greater than largest uint8).
   *
   * Counterpart to Solidity's `uint8` operator.
   *
   * Requirements:
   *
   * - input must fit into 8 bits.
   */
  function toUint8(uint256 value) internal pure returns (uint8) {
    require(value <= type(uint8).max, "SafeCast: value doesn't fit in 8 bits");
    return uint8(value);
  }

  /**
   * @dev Converts a signed int256 into an unsigned uint256.
   *
   * Requirements:
   *
   * - input must be greater than or equal to 0.
   */
  function toUint256(int256 value) internal pure returns (uint256) {
    require(value >= 0, 'SafeCast: value must be positive');
    return uint256(value);
  }

  /**
   * @dev Returns the downcasted int128 from int256, reverting on
   * overflow (when the input is less than smallest int128 or
   * greater than largest int128).
   *
   * Counterpart to Solidity's `int128` operator.
   *
   * Requirements:
   *
   * - input must fit into 128 bits
   *
   * _Available since v3.1._
   */
  function toInt128(int256 value) internal pure returns (int128) {
    require(
      value >= type(int128).min && value <= type(int128).max,
      "SafeCast: value doesn't fit in 128 bits"
    );
    return int128(value);
  }

  /**
   * @dev Returns the downcasted int64 from int256, reverting on
   * overflow (when the input is less than smallest int64 or
   * greater than largest int64).
   *
   * Counterpart to Solidity's `int64` operator.
   *
   * Requirements:
   *
   * - input must fit into 64 bits
   *
   * _Available since v3.1._
   */
  function toInt64(int256 value) internal pure returns (int64) {
    require(
      value >= type(int64).min && value <= type(int64).max,
      "SafeCast: value doesn't fit in 64 bits"
    );
    return int64(value);
  }

  /**
   * @dev Returns the downcasted int32 from int256, reverting on
   * overflow (when the input is less than smallest int32 or
   * greater than largest int32).
   *
   * Counterpart to Solidity's `int32` operator.
   *
   * Requirements:
   *
   * - input must fit into 32 bits
   *
   * _Available since v3.1._
   */
  function toInt32(int256 value) internal pure returns (int32) {
    require(
      value >= type(int32).min && value <= type(int32).max,
      "SafeCast: value doesn't fit in 32 bits"
    );
    return int32(value);
  }

  /**
   * @dev Returns the downcasted int16 from int256, reverting on
   * overflow (when the input is less than smallest int16 or
   * greater than largest int16).
   *
   * Counterpart to Solidity's `int16` operator.
   *
   * Requirements:
   *
   * - input must fit into 16 bits
   *
   * _Available since v3.1._
   */
  function toInt16(int256 value) internal pure returns (int16) {
    require(
      value >= type(int16).min && value <= type(int16).max,
      "SafeCast: value doesn't fit in 16 bits"
    );
    return int16(value);
  }

  /**
   * @dev Returns the downcasted int8 from int256, reverting on
   * overflow (when the input is less than smallest int8 or
   * greater than largest int8).
   *
   * Counterpart to Solidity's `int8` operator.
   *
   * Requirements:
   *
   * - input must fit into 8 bits.
   *
   * _Available since v3.1._
   */
  function toInt8(int256 value) internal pure returns (int8) {
    require(
      value >= type(int8).min && value <= type(int8).max,
      "SafeCast: value doesn't fit in 8 bits"
    );
    return int8(value);
  }

  /**
   * @dev Converts an unsigned uint256 into a signed int256.
   *
   * Requirements:
   *
   * - input must be less than or equal to maxInt256.
   */
  function toInt256(uint256 value) internal pure returns (int256) {
    // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive
    require(value <= uint256(type(int256).max), "SafeCast: value doesn't fit in an int256");
    return int256(value);
  }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {IPoolAddressesProvider} from './IPoolAddressesProvider.sol';

/**
 * @title IACLManager
 * @author Aave
 * @notice Defines the basic interface for the ACL Manager
 */
interface IACLManager {
  /**
   * @notice Returns the contract address of the PoolAddressesProvider
   * @return The address of the PoolAddressesProvider
   */
  function ADDRESSES_PROVIDER() external view returns (IPoolAddressesProvider);

  /**
   * @notice Returns the identifier of the PoolAdmin role
   * @return The id of the PoolAdmin role
   */
  function POOL_ADMIN_ROLE() external view returns (bytes32);

  /**
   * @notice Returns the identifier of the EmergencyAdmin role
   * @return The id of the EmergencyAdmin role
   */
  function EMERGENCY_ADMIN_ROLE() external view returns (bytes32);

  /**
   * @notice Returns the identifier of the RiskAdmin role
   * @return The id of the RiskAdmin role
   */
  function RISK_ADMIN_ROLE() external view returns (bytes32);

  /**
   * @notice Returns the identifier of the FlashBorrower role
   * @return The id of the FlashBorrower role
   */
  function FLASH_BORROWER_ROLE() external view returns (bytes32);

  /**
   * @notice Returns the identifier of the Bridge role
   * @return The id of the Bridge role
   */
  function BRIDGE_ROLE() external view returns (bytes32);

  /**
   * @notice Returns the identifier of the AssetListingAdmin role
   * @return The id of the AssetListingAdmin role
   */
  function ASSET_LISTING_ADMIN_ROLE() external view returns (bytes32);

  /**
   * @notice Set the role as admin of a specific role.
   * @dev By default the admin role for all roles is `DEFAULT_ADMIN_ROLE`.
   * @param role The role to be managed by the admin role
   * @param adminRole The admin role
   */
  function setRoleAdmin(bytes32 role, bytes32 adminRole) external;

  /**
   * @notice Adds a new admin as PoolAdmin
   * @param admin The address of the new admin
   */
  function addPoolAdmin(address admin) external;

  /**
   * @notice Removes an admin as PoolAdmin
   * @param admin The address of the admin to remove
   */
  function removePoolAdmin(address admin) external;

  /**
   * @notice Returns true if the address is PoolAdmin, false otherwise
   * @param admin The address to check
   * @return True if the given address is PoolAdmin, false otherwise
   */
  function isPoolAdmin(address admin) external view returns (bool);

  /**
   * @notice Adds a new admin as EmergencyAdmin
   * @param admin The address of the new admin
   */
  function addEmergencyAdmin(address admin) external;

  /**
   * @notice Removes an admin as EmergencyAdmin
   * @param admin The address of the admin to remove
   */
  function removeEmergencyAdmin(address admin) external;

  /**
   * @notice Returns true if the address is EmergencyAdmin, false otherwise
   * @param admin The address to check
   * @return True if the given address is EmergencyAdmin, false otherwise
   */
  function isEmergencyAdmin(address admin) external view returns (bool);

  /**
   * @notice Adds a new admin as RiskAdmin
   * @param admin The address of the new admin
   */
  function addRiskAdmin(address admin) external;

  /**
   * @notice Removes an admin as RiskAdmin
   * @param admin The address of the admin to remove
   */
  function removeRiskAdmin(address admin) external;

  /**
   * @notice Returns true if the address is RiskAdmin, false otherwise
   * @param admin The address to check
   * @return True if the given address is RiskAdmin, false otherwise
   */
  function isRiskAdmin(address admin) external view returns (bool);

  /**
   * @notice Adds a new address as FlashBorrower
   * @param borrower The address of the new FlashBorrower
   */
  function addFlashBorrower(address borrower) external;

  /**
   * @notice Removes an address as FlashBorrower
   * @param borrower The address of the FlashBorrower to remove
   */
  function removeFlashBorrower(address borrower) external;

  /**
   * @notice Returns true if the address is FlashBorrower, false otherwise
   * @param borrower The address to check
   * @return True if the given address is FlashBorrower, false otherwise
   */
  function isFlashBorrower(address borrower) external view returns (bool);

  /**
   * @notice Adds a new address as Bridge
   * @param bridge The address of the new Bridge
   */
  function addBridge(address bridge) external;

  /**
   * @notice Removes an address as Bridge
   * @param bridge The address of the bridge to remove
   */
  function removeBridge(address bridge) external;

  /**
   * @notice Returns true if the address is Bridge, false otherwise
   * @param bridge The address to check
   * @return True if the given address is Bridge, false otherwise
   */
  function isBridge(address bridge) external view returns (bool);

  /**
   * @notice Adds a new admin as AssetListingAdmin
   * @param admin The address of the new admin
   */
  function addAssetListingAdmin(address admin) external;

  /**
   * @notice Removes an admin as AssetListingAdmin
   * @param admin The address of the admin to remove
   */
  function removeAssetListingAdmin(address admin) external;

  /**
   * @notice Returns true if the address is AssetListingAdmin, false otherwise
   * @param admin The address to check
   * @return True if the given address is AssetListingAdmin, false otherwise
   */
  function isAssetListingAdmin(address admin) external view returns (bool);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {IERC20} from '../dependencies/openzeppelin/contracts/IERC20.sol';
import {IScaledBalanceToken} from './IScaledBalanceToken.sol';
import {IInitializableAToken} from './IInitializableAToken.sol';

/**
 * @title IAToken
 * @author Aave
 * @notice Defines the basic interface for an AToken.
 */
interface IAToken is IERC20, IScaledBalanceToken, IInitializableAToken {
  /**
   * @dev Emitted during the transfer action
   * @param from The user whose tokens are being transferred
   * @param to The recipient
   * @param value The scaled amount being transferred
   * @param index The next liquidity index of the reserve
   */
  event BalanceTransfer(address indexed from, address indexed to, uint256 value, uint256 index);

  /**
   * @notice Mints `amount` aTokens to `user`
   * @param caller The address performing the mint
   * @param onBehalfOf The address of the user that will receive the minted aTokens
   * @param amount The amount of tokens getting minted
   * @param index The next liquidity index of the reserve
   * @return `true` if the the previous balance of the user was 0
   */
  function mint(
    address caller,
    address onBehalfOf,
    uint256 amount,
    uint256 index
  ) external returns (bool);

  /**
   * @notice Burns aTokens from `user` and sends the equivalent amount of underlying to `receiverOfUnderlying`
   * @dev In some instances, the mint event could be emitted from a burn transaction
   * if the amount to burn is less than the interest that the user accrued
   * @param from The address from which the aTokens will be burned
   * @param receiverOfUnderlying The address that will receive the underlying
   * @param amount The amount being burned
   * @param index The next liquidity index of the reserve
   */
  function burn(address from, address receiverOfUnderlying, uint256 amount, uint256 index) external;

  /**
   * @notice Mints aTokens to the reserve treasury
   * @param amount The amount of tokens getting minted
   * @param index The next liquidity index of the reserve
   */
  function mintToTreasury(uint256 amount, uint256 index) external;

  /**
   * @notice Transfers aTokens in the event of a borrow being liquidated, in case the liquidators reclaims the aToken
   * @param from The address getting liquidated, current owner of the aTokens
   * @param to The recipient
   * @param value The amount of tokens getting transferred
   */
  function transferOnLiquidation(address from, address to, uint256 value) external;

  /**
   * @notice Transfers the underlying asset to `target`.
   * @dev Used by the Pool to transfer assets in borrow(), withdraw() and flashLoan()
   * @param target The recipient of the underlying
   * @param amount The amount getting transferred
   */
  function transferUnderlyingTo(address target, uint256 amount) external;

  /**
   * @notice Handles the underlying received by the aToken after the transfer has been completed.
   * @dev The default implementation is empty as with standard ERC20 tokens, nothing needs to be done after the
   * transfer is concluded. However in the future there may be aTokens that allow for example to stake the underlying
   * to receive LM rewards. In that case, `handleRepayment()` would perform the staking of the underlying asset.
   * @param user The user executing the repayment
   * @param onBehalfOf The address of the user who will get his debt reduced/removed
   * @param amount The amount getting repaid
   */
  function handleRepayment(address user, address onBehalfOf, uint256 amount) external;

  /**
   * @notice Allow passing a signed message to approve spending
   * @dev implements the permit function as for
   * https://github.com/ethereum/EIPs/blob/8a34d644aacf0f9f8f00815307fd7dd5da07655f/EIPS/eip-2612.md
   * @param owner The owner of the funds
   * @param spender The spender
   * @param value The amount
   * @param deadline The deadline timestamp, type(uint256).max for max deadline
   * @param v Signature param
   * @param s Signature param
   * @param r Signature param
   */
  function permit(
    address owner,
    address spender,
    uint256 value,
    uint256 deadline,
    uint8 v,
    bytes32 r,
    bytes32 s
  ) external;

  /**
   * @notice Returns the address of the underlying asset of this aToken (E.g. WETH for aWETH)
   * @return The address of the underlying asset
   */
  function UNDERLYING_ASSET_ADDRESS() external view returns (address);

  /**
   * @notice Returns the address of the Aave treasury, receiving the fees on this aToken.
   * @return Address of the Aave treasury
   */
  function RESERVE_TREASURY_ADDRESS() external view returns (address);

  /**
   * @notice Get the domain separator for the token
   * @dev Return cached value if chainId matches cache, otherwise recomputes separator
   * @return The domain separator of the token at current chain
   */
  function DOMAIN_SEPARATOR() external view returns (bytes32);

  /**
   * @notice Returns the nonce for owner.
   * @param owner The address of the owner
   * @return The nonce of the owner
   */
  function nonces(address owner) external view returns (uint256);

  /**
   * @notice Rescue and transfer tokens locked in this contract
   * @param token The address of the token
   * @param to The address of the recipient
   * @param amount The amount of token to transfer
   */
  function rescueTokens(address token, address to, uint256 amount) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/**
 * @title IAaveIncentivesController
 * @author Aave
 * @notice Defines the basic interface for an Aave Incentives Controller.
 * @dev It only contains one single function, needed as a hook on aToken and debtToken transfers.
 */
interface IAaveIncentivesController {
  /**
   * @dev Called by the corresponding asset on transfer hook in order to update the rewards distribution.
   * @dev The units of `totalSupply` and `userBalance` should be the same.
   * @param user The address of the user whose asset balance has changed
   * @param totalSupply The total supply of the asset prior to user balance change
   * @param userBalance The previous user balance prior to balance change
   */
  function handleAction(address user, uint256 totalSupply, uint256 userBalance) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {IAaveIncentivesController} from './IAaveIncentivesController.sol';
import {IPool} from './IPool.sol';

/**
 * @title IInitializableAToken
 * @author Aave
 * @notice Interface for the initialize function on AToken
 */
interface IInitializableAToken {
  /**
   * @dev Emitted when an aToken is initialized
   * @param underlyingAsset The address of the underlying asset
   * @param pool The address of the associated pool
   * @param treasury The address of the treasury
   * @param incentivesController The address of the incentives controller for this aToken
   * @param aTokenDecimals The decimals of the underlying
   * @param aTokenName The name of the aToken
   * @param aTokenSymbol The symbol of the aToken
   * @param params A set of encoded parameters for additional initialization
   */
  event Initialized(
    address indexed underlyingAsset,
    address indexed pool,
    address treasury,
    address incentivesController,
    uint8 aTokenDecimals,
    string aTokenName,
    string aTokenSymbol,
    bytes params
  );

  /**
   * @notice Initializes the aToken
   * @param pool The pool contract that is initializing this contract
   * @param treasury The address of the Aave treasury, receiving the fees on this aToken
   * @param underlyingAsset The address of the underlying asset of this aToken (E.g. WETH for aWETH)
   * @param incentivesController The smart contract managing potential incentives distribution
   * @param aTokenDecimals The decimals of the aToken, same as the underlying asset's
   * @param aTokenName The name of the aToken
   * @param aTokenSymbol The symbol of the aToken
   * @param params A set of encoded parameters for additional initialization
   */
  function initialize(
    IPool pool,
    address treasury,
    address underlyingAsset,
    IAaveIncentivesController incentivesController,
    uint8 aTokenDecimals,
    string calldata aTokenName,
    string calldata aTokenSymbol,
    bytes calldata params
  ) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {IAaveIncentivesController} from './IAaveIncentivesController.sol';
import {IPool} from './IPool.sol';

/**
 * @title IInitializableDebtToken
 * @author Aave
 * @notice Interface for the initialize function common between debt tokens
 */
interface IInitializableDebtToken {
  /**
   * @dev Emitted when a debt token is initialized
   * @param underlyingAsset The address of the underlying asset
   * @param pool The address of the associated pool
   * @param incentivesController The address of the incentives controller for this aToken
   * @param debtTokenDecimals The decimals of the debt token
   * @param debtTokenName The name of the debt token
   * @param debtTokenSymbol The symbol of the debt token
   * @param params A set of encoded parameters for additional initialization
   */
  event Initialized(
    address indexed underlyingAsset,
    address indexed pool,
    address incentivesController,
    uint8 debtTokenDecimals,
    string debtTokenName,
    string debtTokenSymbol,
    bytes params
  );

  /**
   * @notice Initializes the debt token.
   * @param pool The pool contract that is initializing this contract
   * @param underlyingAsset The address of the underlying asset of this aToken (E.g. WETH for aWETH)
   * @param incentivesController The smart contract managing potential incentives distribution
   * @param debtTokenDecimals The decimals of the debtToken, same as the underlying asset's
   * @param debtTokenName The name of the token
   * @param debtTokenSymbol The symbol of the token
   * @param params A set of encoded parameters for additional initialization
   */
  function initialize(
    IPool pool,
    address underlyingAsset,
    IAaveIncentivesController incentivesController,
    uint8 debtTokenDecimals,
    string memory debtTokenName,
    string memory debtTokenSymbol,
    bytes calldata params
  ) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {IPoolAddressesProvider} from './IPoolAddressesProvider.sol';
import {DataTypes} from '../protocol/libraries/types/DataTypes.sol';

/**
 * @title IPool
 * @author Aave
 * @notice Defines the basic interface for an Aave Pool.
 */
interface IPool {
  /**
   * @dev Emitted on mintUnbacked()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address initiating the supply
   * @param onBehalfOf The beneficiary of the supplied assets, receiving the aTokens
   * @param amount The amount of supplied assets
   * @param referralCode The referral code used
   */
  event MintUnbacked(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    uint16 indexed referralCode
  );

  /**
   * @dev Emitted on backUnbacked()
   * @param reserve The address of the underlying asset of the reserve
   * @param backer The address paying for the backing
   * @param amount The amount added as backing
   * @param fee The amount paid in fees
   */
  event BackUnbacked(address indexed reserve, address indexed backer, uint256 amount, uint256 fee);

  /**
   * @dev Emitted on supply()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address initiating the supply
   * @param onBehalfOf The beneficiary of the supply, receiving the aTokens
   * @param amount The amount supplied
   * @param referralCode The referral code used
   */
  event Supply(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    uint16 indexed referralCode
  );

  /**
   * @dev Emitted on withdraw()
   * @param reserve The address of the underlying asset being withdrawn
   * @param user The address initiating the withdrawal, owner of aTokens
   * @param to The address that will receive the underlying
   * @param amount The amount to be withdrawn
   */
  event Withdraw(address indexed reserve, address indexed user, address indexed to, uint256 amount);

  /**
   * @dev Emitted on borrow() and flashLoan() when debt needs to be opened
   * @param reserve The address of the underlying asset being borrowed
   * @param user The address of the user initiating the borrow(), receiving the funds on borrow() or just
   * initiator of the transaction on flashLoan()
   * @param onBehalfOf The address that will be getting the debt
   * @param amount The amount borrowed out
   * @param interestRateMode The rate mode: 2 for Variable, 1 is deprecated (changed on v3.2.0)
   * @param borrowRate The numeric rate at which the user has borrowed, expressed in ray
   * @param referralCode The referral code used
   */
  event Borrow(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    DataTypes.InterestRateMode interestRateMode,
    uint256 borrowRate,
    uint16 indexed referralCode
  );

  /**
   * @dev Emitted on repay()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The beneficiary of the repayment, getting his debt reduced
   * @param repayer The address of the user initiating the repay(), providing the funds
   * @param amount The amount repaid
   * @param useATokens True if the repayment is done using aTokens, `false` if done with underlying asset directly
   */
  event Repay(
    address indexed reserve,
    address indexed user,
    address indexed repayer,
    uint256 amount,
    bool useATokens
  );

  /**
   * @dev Emitted on borrow(), repay() and liquidationCall() when using isolated assets
   * @param asset The address of the underlying asset of the reserve
   * @param totalDebt The total isolation mode debt for the reserve
   */
  event IsolationModeTotalDebtUpdated(address indexed asset, uint256 totalDebt);

  /**
   * @dev Emitted when the user selects a certain asset category for eMode
   * @param user The address of the user
   * @param categoryId The category id
   */
  event UserEModeSet(address indexed user, uint8 categoryId);

  /**
   * @dev Emitted on setUserUseReserveAsCollateral()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user enabling the usage as collateral
   */
  event ReserveUsedAsCollateralEnabled(address indexed reserve, address indexed user);

  /**
   * @dev Emitted on setUserUseReserveAsCollateral()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user enabling the usage as collateral
   */
  event ReserveUsedAsCollateralDisabled(address indexed reserve, address indexed user);

  /**
   * @dev Emitted on flashLoan()
   * @param target The address of the flash loan receiver contract
   * @param initiator The address initiating the flash loan
   * @param asset The address of the asset being flash borrowed
   * @param amount The amount flash borrowed
   * @param interestRateMode The flashloan mode: 0 for regular flashloan,
   *        1 for Stable (Deprecated on v3.2.0), 2 for Variable
   * @param premium The fee flash borrowed
   * @param referralCode The referral code used
   */
  event FlashLoan(
    address indexed target,
    address initiator,
    address indexed asset,
    uint256 amount,
    DataTypes.InterestRateMode interestRateMode,
    uint256 premium,
    uint16 indexed referralCode
  );

  /**
   * @dev Emitted when a borrower is liquidated.
   * @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
   * @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
   * @param user The address of the borrower getting liquidated
   * @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
   * @param liquidatedCollateralAmount The amount of collateral received by the liquidator
   * @param liquidator The address of the liquidator
   * @param receiveAToken True if the liquidators wants to receive the collateral aTokens, `false` if he wants
   * to receive the underlying collateral asset directly
   */
  event LiquidationCall(
    address indexed collateralAsset,
    address indexed debtAsset,
    address indexed user,
    uint256 debtToCover,
    uint256 liquidatedCollateralAmount,
    address liquidator,
    bool receiveAToken
  );

  /**
   * @dev Emitted when the state of a reserve is updated.
   * @param reserve The address of the underlying asset of the reserve
   * @param liquidityRate The next liquidity rate
   * @param stableBorrowRate The next stable borrow rate @note deprecated on v3.2.0
   * @param variableBorrowRate The next variable borrow rate
   * @param liquidityIndex The next liquidity index
   * @param variableBorrowIndex The next variable borrow index
   */
  event ReserveDataUpdated(
    address indexed reserve,
    uint256 liquidityRate,
    uint256 stableBorrowRate,
    uint256 variableBorrowRate,
    uint256 liquidityIndex,
    uint256 variableBorrowIndex
  );

  /**
   * @dev Emitted when the deficit of a reserve is covered.
   * @param reserve The address of the underlying asset of the reserve
   * @param caller The caller that triggered the DeficitCovered event
   * @param amountCovered The amount of deficit covered
   */
  event DeficitCovered(address indexed reserve, address caller, uint256 amountCovered);

  /**
   * @dev Emitted when the protocol treasury receives minted aTokens from the accrued interest.
   * @param reserve The address of the reserve
   * @param amountMinted The amount minted to the treasury
   */
  event MintedToTreasury(address indexed reserve, uint256 amountMinted);

  /**
   * @dev Emitted when deficit is realized on a liquidation.
   * @param user The user address where the bad debt will be burned
   * @param debtAsset The address of the underlying borrowed asset to be burned
   * @param amountCreated The amount of deficit created
   */
  event DeficitCreated(address indexed user, address indexed debtAsset, uint256 amountCreated);

  /**
   * @notice Mints an `amount` of aTokens to the `onBehalfOf`
   * @param asset The address of the underlying asset to mint
   * @param amount The amount to mint
   * @param onBehalfOf The address that will receive the aTokens
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function mintUnbacked(
    address asset,
    uint256 amount,
    address onBehalfOf,
    uint16 referralCode
  ) external;

  /**
   * @notice Back the current unbacked underlying with `amount` and pay `fee`.
   * @param asset The address of the underlying asset to back
   * @param amount The amount to back
   * @param fee The amount paid in fees
   * @return The backed amount
   */
  function backUnbacked(address asset, uint256 amount, uint256 fee) external returns (uint256);

  /**
   * @notice Supplies an `amount` of underlying asset into the reserve, receiving in return overlying aTokens.
   * - E.g. User supplies 100 USDC and gets in return 100 aUSDC
   * @param asset The address of the underlying asset to supply
   * @param amount The amount to be supplied
   * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
   *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
   *   is a different wallet
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function supply(address asset, uint256 amount, address onBehalfOf, uint16 referralCode) external;

  /**
   * @notice Supply with transfer approval of asset to be supplied done via permit function
   * see: https://eips.ethereum.org/EIPS/eip-2612 and https://eips.ethereum.org/EIPS/eip-713
   * @param asset The address of the underlying asset to supply
   * @param amount The amount to be supplied
   * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
   *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
   *   is a different wallet
   * @param deadline The deadline timestamp that the permit is valid
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   * @param permitV The V parameter of ERC712 permit sig
   * @param permitR The R parameter of ERC712 permit sig
   * @param permitS The S parameter of ERC712 permit sig
   */
  function supplyWithPermit(
    address asset,
    uint256 amount,
    address onBehalfOf,
    uint16 referralCode,
    uint256 deadline,
    uint8 permitV,
    bytes32 permitR,
    bytes32 permitS
  ) external;

  /**
   * @notice Withdraws an `amount` of underlying asset from the reserve, burning the equivalent aTokens owned
   * E.g. User has 100 aUSDC, calls withdraw() and receives 100 USDC, burning the 100 aUSDC
   * @param asset The address of the underlying asset to withdraw
   * @param amount The underlying amount to be withdrawn
   *   - Send the value type(uint256).max in order to withdraw the whole aToken balance
   * @param to The address that will receive the underlying, same as msg.sender if the user
   *   wants to receive it on his own wallet, or a different address if the beneficiary is a
   *   different wallet
   * @return The final amount withdrawn
   */
  function withdraw(address asset, uint256 amount, address to) external returns (uint256);

  /**
   * @notice Allows users to borrow a specific `amount` of the reserve underlying asset, provided that the borrower
   * already supplied enough collateral, or he was given enough allowance by a credit delegator on the VariableDebtToken
   * - E.g. User borrows 100 USDC passing as `onBehalfOf` his own address, receiving the 100 USDC in his wallet
   *   and 100 variable debt tokens
   * @param asset The address of the underlying asset to borrow
   * @param amount The amount to be borrowed
   * @param interestRateMode 2 for Variable, 1 is deprecated on v3.2.0
   * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   * @param onBehalfOf The address of the user who will receive the debt. Should be the address of the borrower itself
   * calling the function if he wants to borrow against his own collateral, or the address of the credit delegator
   * if he has been given credit delegation allowance
   */
  function borrow(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    uint16 referralCode,
    address onBehalfOf
  ) external;

  /**
   * @notice Repays a borrowed `amount` on a specific reserve, burning the equivalent debt tokens owned
   * - E.g. User repays 100 USDC, burning 100 variable debt tokens of the `onBehalfOf` address
   * @param asset The address of the borrowed underlying asset previously borrowed
   * @param amount The amount to repay
   * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
   * @param interestRateMode 2 for Variable, 1 is deprecated on v3.2.0
   * @param onBehalfOf The address of the user who will get his debt reduced/removed. Should be the address of the
   * user calling the function if he wants to reduce/remove his own debt, or the address of any other
   * other borrower whose debt should be removed
   * @return The final amount repaid
   */
  function repay(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    address onBehalfOf
  ) external returns (uint256);

  /**
   * @notice Repay with transfer approval of asset to be repaid done via permit function
   * see: https://eips.ethereum.org/EIPS/eip-2612 and https://eips.ethereum.org/EIPS/eip-713
   * @param asset The address of the borrowed underlying asset previously borrowed
   * @param amount The amount to repay
   * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
   * @param interestRateMode 2 for Variable, 1 is deprecated on v3.2.0
   * @param onBehalfOf Address of the user who will get his debt reduced/removed. Should be the address of the
   * user calling the function if he wants to reduce/remove his own debt, or the address of any other
   * other borrower whose debt should be removed
   * @param deadline The deadline timestamp that the permit is valid
   * @param permitV The V parameter of ERC712 permit sig
   * @param permitR The R parameter of ERC712 permit sig
   * @param permitS The S parameter of ERC712 permit sig
   * @return The final amount repaid
   */
  function repayWithPermit(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    address onBehalfOf,
    uint256 deadline,
    uint8 permitV,
    bytes32 permitR,
    bytes32 permitS
  ) external returns (uint256);

  /**
   * @notice Repays a borrowed `amount` on a specific reserve using the reserve aTokens, burning the
   * equivalent debt tokens
   * - E.g. User repays 100 USDC using 100 aUSDC, burning 100 variable debt tokens
   * @dev  Passing uint256.max as amount will clean up any residual aToken dust balance, if the user aToken
   * balance is not enough to cover the whole debt
   * @param asset The address of the borrowed underlying asset previously borrowed
   * @param amount The amount to repay
   * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
   * @param interestRateMode DEPRECATED in v3.2.0
   * @return The final amount repaid
   */
  function repayWithATokens(
    address asset,
    uint256 amount,
    uint256 interestRateMode
  ) external returns (uint256);

  /**
   * @notice Allows suppliers to enable/disable a specific supplied asset as collateral
   * @param asset The address of the underlying asset supplied
   * @param useAsCollateral True if the user wants to use the supply as collateral, false otherwise
   */
  function setUserUseReserveAsCollateral(address asset, bool useAsCollateral) external;

  /**
   * @notice Function to liquidate a non-healthy position collateral-wise, with Health Factor below 1
   * - The caller (liquidator) covers `debtToCover` amount of debt of the user getting liquidated, and receives
   *   a proportionally amount of the `collateralAsset` plus a bonus to cover market risk
   * @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
   * @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
   * @param user The address of the borrower getting liquidated
   * @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
   * @param receiveAToken True if the liquidators wants to receive the collateral aTokens, `false` if he wants
   * to receive the underlying collateral asset directly
   */
  function liquidationCall(
    address collateralAsset,
    address debtAsset,
    address user,
    uint256 debtToCover,
    bool receiveAToken
  ) external;

  /**
   * @notice Allows smartcontracts to access the liquidity of the pool within one transaction,
   * as long as the amount taken plus a fee is returned.
   * @dev IMPORTANT There are security concerns for developers of flashloan receiver contracts that must be kept
   * into consideration. For further details please visit https://docs.aave.com/developers/
   * @param receiverAddress The address of the contract receiving the funds, implementing IFlashLoanReceiver interface
   * @param assets The addresses of the assets being flash-borrowed
   * @param amounts The amounts of the assets being flash-borrowed
   * @param interestRateModes Types of the debt to open if the flash loan is not returned:
   *   0 -> Don't open any debt, just revert if funds can't be transferred from the receiver
   *   1 -> Deprecated on v3.2.0
   *   2 -> Open debt at variable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
   * @param onBehalfOf The address  that will receive the debt in the case of using 2 on `modes`
   * @param params Variadic packed params to pass to the receiver as extra information
   * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function flashLoan(
    address receiverAddress,
    address[] calldata assets,
    uint256[] calldata amounts,
    uint256[] calldata interestRateModes,
    address onBehalfOf,
    bytes calldata params,
    uint16 referralCode
  ) external;

  /**
   * @notice Allows smartcontracts to access the liquidity of the pool within one transaction,
   * as long as the amount taken plus a fee is returned.
   * @dev IMPORTANT There are security concerns for developers of flashloan receiver contracts that must be kept
   * into consideration. For further details please visit https://docs.aave.com/developers/
   * @param receiverAddress The address of the contract receiving the funds, implementing IFlashLoanSimpleReceiver interface
   * @param asset The address of the asset being flash-borrowed
   * @param amount The amount of the asset being flash-borrowed
   * @param params Variadic packed params to pass to the receiver as extra information
   * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function flashLoanSimple(
    address receiverAddress,
    address asset,
    uint256 amount,
    bytes calldata params,
    uint16 referralCode
  ) external;

  /**
   * @notice Returns the user account data across all the reserves
   * @param user The address of the user
   * @return totalCollateralBase The total collateral of the user in the base currency used by the price feed
   * @return totalDebtBase The total debt of the user in the base currency used by the price feed
   * @return availableBorrowsBase The borrowing power left of the user in the base currency used by the price feed
   * @return currentLiquidationThreshold The liquidation threshold of the user
   * @return ltv The loan to value of The user
   * @return healthFactor The current health factor of the user
   */
  function getUserAccountData(
    address user
  )
    external
    view
    returns (
      uint256 totalCollateralBase,
      uint256 totalDebtBase,
      uint256 availableBorrowsBase,
      uint256 currentLiquidationThreshold,
      uint256 ltv,
      uint256 healthFactor
    );

  /**
   * @notice Initializes a reserve, activating it, assigning an aToken and debt tokens and an
   * interest rate strategy
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   * @param aTokenAddress The address of the aToken that will be assigned to the reserve
   * @param variableDebtAddress The address of the VariableDebtToken that will be assigned to the reserve
   * @param interestRateStrategyAddress The address of the interest rate strategy contract
   */
  function initReserve(
    address asset,
    address aTokenAddress,
    address variableDebtAddress,
    address interestRateStrategyAddress
  ) external;

  /**
   * @notice Drop a reserve
   * @dev Only callable by the PoolConfigurator contract
   * @dev Does not reset eMode flags, which must be considered when reusing the same reserve id for a different reserve.
   * @param asset The address of the underlying asset of the reserve
   */
  function dropReserve(address asset) external;

  /**
   * @notice Updates the address of the interest rate strategy contract
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   * @param rateStrategyAddress The address of the interest rate strategy contract
   */
  function setReserveInterestRateStrategyAddress(
    address asset,
    address rateStrategyAddress
  ) external;

  /**
   * @notice Accumulates interest to all indexes of the reserve
   * @dev Only callable by the PoolConfigurator contract
   * @dev To be used when required by the configurator, for example when updating interest rates strategy data
   * @param asset The address of the underlying asset of the reserve
   */
  function syncIndexesState(address asset) external;

  /**
   * @notice Updates interest rates on the reserve data
   * @dev Only callable by the PoolConfigurator contract
   * @dev To be used when required by the configurator, for example when updating interest rates strategy data
   * @param asset The address of the underlying asset of the reserve
   */
  function syncRatesState(address asset) external;

  /**
   * @notice Sets the configuration bitmap of the reserve as a whole
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   * @param configuration The new configuration bitmap
   */
  function setConfiguration(
    address asset,
    DataTypes.ReserveConfigurationMap calldata configuration
  ) external;

  /**
   * @notice Returns the configuration of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The configuration of the reserve
   */
  function getConfiguration(
    address asset
  ) external view returns (DataTypes.ReserveConfigurationMap memory);

  /**
   * @notice Returns the configuration of the user across all the reserves
   * @param user The user address
   * @return The configuration of the user
   */
  function getUserConfiguration(
    address user
  ) external view returns (DataTypes.UserConfigurationMap memory);

  /**
   * @notice Returns the normalized income of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The reserve's normalized income
   */
  function getReserveNormalizedIncome(address asset) external view returns (uint256);

  /**
   * @notice Returns the normalized variable debt per unit of asset
   * @dev WARNING: This function is intended to be used primarily by the protocol itself to get a
   * "dynamic" variable index based on time, current stored index and virtual rate at the current
   * moment (approx. a borrower would get if opening a position). This means that is always used in
   * combination with variable debt supply/balances.
   * If using this function externally, consider that is possible to have an increasing normalized
   * variable debt that is not equivalent to how the variable debt index would be updated in storage
   * (e.g. only updates with non-zero variable debt supply)
   * @param asset The address of the underlying asset of the reserve
   * @return The reserve normalized variable debt
   */
  function getReserveNormalizedVariableDebt(address asset) external view returns (uint256);

  /**
   * @notice Returns the state and configuration of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The state and configuration data of the reserve
   */
  function getReserveData(address asset) external view returns (DataTypes.ReserveDataLegacy memory);

  /**
   * @notice Returns the virtual underlying balance of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The reserve virtual underlying balance
   */
  function getVirtualUnderlyingBalance(address asset) external view returns (uint128);

  /**
   * @notice Validates and finalizes an aToken transfer
   * @dev Only callable by the overlying aToken of the `asset`
   * @param asset The address of the underlying asset of the aToken
   * @param from The user from which the aTokens are transferred
   * @param to The user receiving the aTokens
   * @param amount The amount being transferred/withdrawn
   * @param balanceFromBefore The aToken balance of the `from` user before the transfer
   * @param balanceToBefore The aToken balance of the `to` user before the transfer
   */
  function finalizeTransfer(
    address asset,
    address from,
    address to,
    uint256 amount,
    uint256 balanceFromBefore,
    uint256 balanceToBefore
  ) external;

  /**
   * @notice Returns the list of the underlying assets of all the initialized reserves
   * @dev It does not include dropped reserves
   * @return The addresses of the underlying assets of the initialized reserves
   */
  function getReservesList() external view returns (address[] memory);

  /**
   * @notice Returns the number of initialized reserves
   * @dev It includes dropped reserves
   * @return The count
   */
  function getReservesCount() external view returns (uint256);

  /**
   * @notice Returns the address of the underlying asset of a reserve by the reserve id as stored in the DataTypes.ReserveData struct
   * @param id The id of the reserve as stored in the DataTypes.ReserveData struct
   * @return The address of the reserve associated with id
   */
  function getReserveAddressById(uint16 id) external view returns (address);

  /**
   * @notice Returns the PoolAddressesProvider connected to this contract
   * @return The address of the PoolAddressesProvider
   */
  function ADDRESSES_PROVIDER() external view returns (IPoolAddressesProvider);

  /**
   * @notice Updates the protocol fee on the bridging
   * @param bridgeProtocolFee The part of the premium sent to the protocol treasury
   */
  function updateBridgeProtocolFee(uint256 bridgeProtocolFee) external;

  /**
   * @notice Updates flash loan premiums. Flash loan premium consists of two parts:
   * - A part is sent to aToken holders as extra, one time accumulated interest
   * - A part is collected by the protocol treasury
   * @dev The total premium is calculated on the total borrowed amount
   * @dev The premium to protocol is calculated on the total premium, being a percentage of `flashLoanPremiumTotal`
   * @dev Only callable by the PoolConfigurator contract
   * @param flashLoanPremiumTotal The total premium, expressed in bps
   * @param flashLoanPremiumToProtocol The part of the premium sent to the protocol treasury, expressed in bps
   */
  function updateFlashloanPremiums(
    uint128 flashLoanPremiumTotal,
    uint128 flashLoanPremiumToProtocol
  ) external;

  /**
   * @notice Configures a new or alters an existing collateral configuration of an eMode.
   * @dev In eMode, the protocol allows very high borrowing power to borrow assets of the same category.
   * The category 0 is reserved as it's the default for volatile assets
   * @param id The id of the category
   * @param config The configuration of the category
   */
  function configureEModeCategory(
    uint8 id,
    DataTypes.EModeCategoryBaseConfiguration memory config
  ) external;

  /**
   * @notice Replaces the current eMode collateralBitmap.
   * @param id The id of the category
   * @param collateralBitmap The collateralBitmap of the category
   */
  function configureEModeCategoryCollateralBitmap(uint8 id, uint128 collateralBitmap) external;

  /**
   * @notice Replaces the current eMode borrowableBitmap.
   * @param id The id of the category
   * @param borrowableBitmap The borrowableBitmap of the category
   */
  function configureEModeCategoryBorrowableBitmap(uint8 id, uint128 borrowableBitmap) external;

  /**
   * @notice Returns the data of an eMode category
   * @dev DEPRECATED use independent getters instead
   * @param id The id of the category
   * @return The configuration data of the category
   */
  function getEModeCategoryData(
    uint8 id
  ) external view returns (DataTypes.EModeCategoryLegacy memory);

  /**
   * @notice Returns the label of an eMode category
   * @param id The id of the category
   * @return The label of the category
   */
  function getEModeCategoryLabel(uint8 id) external view returns (string memory);

  /**
   * @notice Returns the collateral config of an eMode category
   * @param id The id of the category
   * @return The ltv,lt,lb of the category
   */
  function getEModeCategoryCollateralConfig(
    uint8 id
  ) external view returns (DataTypes.CollateralConfig memory);

  /**
   * @notice Returns the collateralBitmap of an eMode category
   * @param id The id of the category
   * @return The collateralBitmap of the category
   */
  function getEModeCategoryCollateralBitmap(uint8 id) external view returns (uint128);

  /**
   * @notice Returns the borrowableBitmap of an eMode category
   * @param id The id of the category
   * @return The borrowableBitmap of the category
   */
  function getEModeCategoryBorrowableBitmap(uint8 id) external view returns (uint128);

  /**
   * @notice Allows a user to use the protocol in eMode
   * @param categoryId The id of the category
   */
  function setUserEMode(uint8 categoryId) external;

  /**
   * @notice Returns the eMode the user is using
   * @param user The address of the user
   * @return The eMode id
   */
  function getUserEMode(address user) external view returns (uint256);

  /**
   * @notice Resets the isolation mode total debt of the given asset to zero
   * @dev It requires the given asset has zero debt ceiling
   * @param asset The address of the underlying asset to reset the isolationModeTotalDebt
   */
  function resetIsolationModeTotalDebt(address asset) external;

  /**
   * @notice Sets the liquidation grace period of the given asset
   * @dev To enable a liquidation grace period, a timestamp in the future should be set,
   *      To disable a liquidation grace period, any timestamp in the past works, like 0
   * @param asset The address of the underlying asset to set the liquidationGracePeriod
   * @param until Timestamp when the liquidation grace period will end
   **/
  function setLiquidationGracePeriod(address asset, uint40 until) external;

  /**
   * @notice Returns the liquidation grace period of the given asset
   * @param asset The address of the underlying asset
   * @return Timestamp when the liquidation grace period will end
   **/
  function getLiquidationGracePeriod(address asset) external view returns (uint40);

  /**
   * @notice Returns the total fee on flash loans
   * @return The total fee on flashloans
   */
  function FLASHLOAN_PREMIUM_TOTAL() external view returns (uint128);

  /**
   * @notice Returns the part of the bridge fees sent to protocol
   * @return The bridge fee sent to the protocol treasury
   */
  function BRIDGE_PROTOCOL_FEE() external view returns (uint256);

  /**
   * @notice Returns the part of the flashloan fees sent to protocol
   * @return The flashloan fee sent to the protocol treasury
   */
  function FLASHLOAN_PREMIUM_TO_PROTOCOL() external view returns (uint128);

  /**
   * @notice Returns the maximum number of reserves supported to be listed in this Pool
   * @return The maximum number of reserves supported
   */
  function MAX_NUMBER_RESERVES() external view returns (uint16);

  /**
   * @notice Mints the assets accrued through the reserve factor to the treasury in the form of aTokens
   * @param assets The list of reserves for which the minting needs to be executed
   */
  function mintToTreasury(address[] calldata assets) external;

  /**
   * @notice Rescue and transfer tokens locked in this contract
   * @param token The address of the token
   * @param to The address of the recipient
   * @param amount The amount of token to transfer
   */
  function rescueTokens(address token, address to, uint256 amount) external;

  /**
   * @notice Supplies an `amount` of underlying asset into the reserve, receiving in return overlying aTokens.
   * - E.g. User supplies 100 USDC and gets in return 100 aUSDC
   * @dev Deprecated: Use the `supply` function instead
   * @param asset The address of the underlying asset to supply
   * @param amount The amount to be supplied
   * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
   *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
   *   is a different wallet
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function deposit(address asset, uint256 amount, address onBehalfOf, uint16 referralCode) external;

  /**
   * @notice It covers the deficit of a specified reserve by burning:
   * - the equivalent aToken `amount` for assets with virtual accounting enabled
   * - the equivalent `amount` of underlying for assets with virtual accounting disabled (e.g. GHO)
   * @dev The deficit of a reserve can occur due to situations where borrowed assets are not repaid, leading to bad debt.
   * @param asset The address of the underlying asset to cover the deficit.
   * @param amount The amount to be covered, in aToken or underlying on non-virtual accounted assets
   */
  function eliminateReserveDeficit(address asset, uint256 amount) external;

  /**
   * @notice Returns the current deficit of a reserve.
   * @param asset The address of the underlying asset of the reserve
   * @return The current deficit of the reserve
   */
  function getReserveDeficit(address asset) external view returns (uint256);

  /**
   * @notice Returns the aToken address of a reserve.
   * @param asset The address of the underlying asset of the reserve
   * @return The address of the aToken
   */
  function getReserveAToken(address asset) external view returns (address);

  /**
   * @notice Returns the variableDebtToken address of a reserve.
   * @param asset The address of the underlying asset of the reserve
   * @return The address of the variableDebtToken
   */
  function getReserveVariableDebtToken(address asset) external view returns (address);

  /**
   * @notice Gets the address of the external FlashLoanLogic
   */
  function getFlashLoanLogic() external view returns (address);

  /**
   * @notice Gets the address of the external BorrowLogic
   */
  function getBorrowLogic() external view returns (address);

  /**
   * @notice Gets the address of the external BridgeLogic
   */
  function getBridgeLogic() external view returns (address);

  /**
   * @notice Gets the address of the external EModeLogic
   */
  function getEModeLogic() external view returns (address);

  /**
   * @notice Gets the address of the external LiquidationLogic
   */
  function getLiquidationLogic() external view returns (address);

  /**
   * @notice Gets the address of the external PoolLogic
   */
  function getPoolLogic() external view returns (address);

  /**
   * @notice Gets the address of the external SupplyLogic
   */
  function getSupplyLogic() external view returns (address);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/**
 * @title IPoolAddressesProvider
 * @author Aave
 * @notice Defines the basic interface for a Pool Addresses Provider.
 */
interface IPoolAddressesProvider {
  /**
   * @dev Emitted when the market identifier is updated.
   * @param oldMarketId The old id of the market
   * @param newMarketId The new id of the market
   */
  event MarketIdSet(string indexed oldMarketId, string indexed newMarketId);

  /**
   * @dev Emitted when the pool is updated.
   * @param oldAddress The old address of the Pool
   * @param newAddress The new address of the Pool
   */
  event PoolUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the pool configurator is updated.
   * @param oldAddress The old address of the PoolConfigurator
   * @param newAddress The new address of the PoolConfigurator
   */
  event PoolConfiguratorUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the price oracle is updated.
   * @param oldAddress The old address of the PriceOracle
   * @param newAddress The new address of the PriceOracle
   */
  event PriceOracleUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the ACL manager is updated.
   * @param oldAddress The old address of the ACLManager
   * @param newAddress The new address of the ACLManager
   */
  event ACLManagerUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the ACL admin is updated.
   * @param oldAddress The old address of the ACLAdmin
   * @param newAddress The new address of the ACLAdmin
   */
  event ACLAdminUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the price oracle sentinel is updated.
   * @param oldAddress The old address of the PriceOracleSentinel
   * @param newAddress The new address of the PriceOracleSentinel
   */
  event PriceOracleSentinelUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the pool data provider is updated.
   * @param oldAddress The old address of the PoolDataProvider
   * @param newAddress The new address of the PoolDataProvider
   */
  event PoolDataProviderUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when a new proxy is created.
   * @param id The identifier of the proxy
   * @param proxyAddress The address of the created proxy contract
   * @param implementationAddress The address of the implementation contract
   */
  event ProxyCreated(
    bytes32 indexed id,
    address indexed proxyAddress,
    address indexed implementationAddress
  );

  /**
   * @dev Emitted when a new non-proxied contract address is registered.
   * @param id The identifier of the contract
   * @param oldAddress The address of the old contract
   * @param newAddress The address of the new contract
   */
  event AddressSet(bytes32 indexed id, address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the implementation of the proxy registered with id is updated
   * @param id The identifier of the contract
   * @param proxyAddress The address of the proxy contract
   * @param oldImplementationAddress The address of the old implementation contract
   * @param newImplementationAddress The address of the new implementation contract
   */
  event AddressSetAsProxy(
    bytes32 indexed id,
    address indexed proxyAddress,
    address oldImplementationAddress,
    address indexed newImplementationAddress
  );

  /**
   * @notice Returns the id of the Aave market to which this contract points to.
   * @return The market id
   */
  function getMarketId() external view returns (string memory);

  /**
   * @notice Associates an id with a specific PoolAddressesProvider.
   * @dev This can be used to create an onchain registry of PoolAddressesProviders to
   * identify and validate multiple Aave markets.
   * @param newMarketId The market id
   */
  function setMarketId(string calldata newMarketId) external;

  /**
   * @notice Returns an address by its identifier.
   * @dev The returned address might be an EOA or a contract, potentially proxied
   * @dev It returns ZERO if there is no registered address with the given id
   * @param id The id
   * @return The address of the registered for the specified id
   */
  function getAddress(bytes32 id) external view returns (address);

  /**
   * @notice General function to update the implementation of a proxy registered with
   * certain `id`. If there is no proxy registered, it will instantiate one and
   * set as implementation the `newImplementationAddress`.
   * @dev IMPORTANT Use this function carefully, only for ids that don't have an explicit
   * setter function, in order to avoid unexpected consequences
   * @param id The id
   * @param newImplementationAddress The address of the new implementation
   */
  function setAddressAsProxy(bytes32 id, address newImplementationAddress) external;

  /**
   * @notice Sets an address for an id replacing the address saved in the addresses map.
   * @dev IMPORTANT Use this function carefully, as it will do a hard replacement
   * @param id The id
   * @param newAddress The address to set
   */
  function setAddress(bytes32 id, address newAddress) external;

  /**
   * @notice Returns the address of the Pool proxy.
   * @return The Pool proxy address
   */
  function getPool() external view returns (address);

  /**
   * @notice Updates the implementation of the Pool, or creates a proxy
   * setting the new `pool` implementation when the function is called for the first time.
   * @param newPoolImpl The new Pool implementation
   */
  function setPoolImpl(address newPoolImpl) external;

  /**
   * @notice Returns the address of the PoolConfigurator proxy.
   * @return The PoolConfigurator proxy address
   */
  function getPoolConfigurator() external view returns (address);

  /**
   * @notice Updates the implementation of the PoolConfigurator, or creates a proxy
   * setting the new `PoolConfigurator` implementation when the function is called for the first time.
   * @param newPoolConfiguratorImpl The new PoolConfigurator implementation
   */
  function setPoolConfiguratorImpl(address newPoolConfiguratorImpl) external;

  /**
   * @notice Returns the address of the price oracle.
   * @return The address of the PriceOracle
   */
  function getPriceOracle() external view returns (address);

  /**
   * @notice Updates the address of the price oracle.
   * @param newPriceOracle The address of the new PriceOracle
   */
  function setPriceOracle(address newPriceOracle) external;

  /**
   * @notice Returns the address of the ACL manager.
   * @return The address of the ACLManager
   */
  function getACLManager() external view returns (address);

  /**
   * @notice Updates the address of the ACL manager.
   * @param newAclManager The address of the new ACLManager
   */
  function setACLManager(address newAclManager) external;

  /**
   * @notice Returns the address of the ACL admin.
   * @return The address of the ACL admin
   */
  function getACLAdmin() external view returns (address);

  /**
   * @notice Updates the address of the ACL admin.
   * @param newAclAdmin The address of the new ACL admin
   */
  function setACLAdmin(address newAclAdmin) external;

  /**
   * @notice Returns the address of the price oracle sentinel.
   * @return The address of the PriceOracleSentinel
   */
  function getPriceOracleSentinel() external view returns (address);

  /**
   * @notice Updates the address of the price oracle sentinel.
   * @param newPriceOracleSentinel The address of the new PriceOracleSentinel
   */
  function setPriceOracleSentinel(address newPriceOracleSentinel) external;

  /**
   * @notice Returns the address of the data provider.
   * @return The address of the DataProvider
   */
  function getPoolDataProvider() external view returns (address);

  /**
   * @notice Updates the address of the data provider.
   * @param newDataProvider The address of the new DataProvider
   */
  function setPoolDataProvider(address newDataProvider) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/**
 * @title IPriceOracleGetter
 * @author Aave
 * @notice Interface for the Aave price oracle.
 */
interface IPriceOracleGetter {
  /**
   * @notice Returns the base currency address
   * @dev Address 0x0 is reserved for USD as base currency.
   * @return Returns the base currency address.
   */
  function BASE_CURRENCY() external view returns (address);

  /**
   * @notice Returns the base currency unit
   * @dev 1 ether for ETH, 1e8 for USD.
   * @return Returns the base currency unit.
   */
  function BASE_CURRENCY_UNIT() external view returns (uint256);

  /**
   * @notice Returns the asset price in the base currency
   * @param asset The address of the asset
   * @return The price of the asset
   */
  function getAssetPrice(address asset) external view returns (uint256);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {IPoolAddressesProvider} from './IPoolAddressesProvider.sol';

/**
 * @title IPriceOracleSentinel
 * @author Aave
 * @notice Defines the basic interface for the PriceOracleSentinel
 */
interface IPriceOracleSentinel {
  /**
   * @dev Emitted after the sequencer oracle is updated
   * @param newSequencerOracle The new sequencer oracle
   */
  event SequencerOracleUpdated(address newSequencerOracle);

  /**
   * @dev Emitted after the grace period is updated
   * @param newGracePeriod The new grace period value
   */
  event GracePeriodUpdated(uint256 newGracePeriod);

  /**
   * @notice Returns the PoolAddressesProvider
   * @return The address of the PoolAddressesProvider contract
   */
  function ADDRESSES_PROVIDER() external view returns (IPoolAddressesProvider);

  /**
   * @notice Returns true if the `borrow` operation is allowed.
   * @dev Operation not allowed when PriceOracle is down or grace period not passed.
   * @return True if the `borrow` operation is allowed, false otherwise.
   */
  function isBorrowAllowed() external view returns (bool);

  /**
   * @notice Returns true if the `liquidation` operation is allowed.
   * @dev Operation not allowed when PriceOracle is down or grace period not passed.
   * @return True if the `liquidation` operation is allowed, false otherwise.
   */
  function isLiquidationAllowed() external view returns (bool);

  /**
   * @notice Updates the address of the sequencer oracle
   * @param newSequencerOracle The address of the new Sequencer Oracle to use
   */
  function setSequencerOracle(address newSequencerOracle) external;

  /**
   * @notice Updates the duration of the grace period
   * @param newGracePeriod The value of the new grace period duration
   */
  function setGracePeriod(uint256 newGracePeriod) external;

  /**
   * @notice Returns the SequencerOracle
   * @return The address of the sequencer oracle contract
   */
  function getSequencerOracle() external view returns (address);

  /**
   * @notice Returns the grace period
   * @return The duration of the grace period
   */
  function getGracePeriod() external view returns (uint256);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {DataTypes} from '../protocol/libraries/types/DataTypes.sol';

/**
 * @title IReserveInterestRateStrategy
 * @author BGD Labs
 * @notice Basic interface for any rate strategy used by the Aave protocol
 */
interface IReserveInterestRateStrategy {
  /**
   * @notice Sets interest rate data for an Aave rate strategy
   * @param reserve The reserve to update
   * @param rateData The abi encoded reserve interest rate data to apply to the given reserve
   *   Abstracted this way as rate strategies can be custom
   */
  function setInterestRateParams(address reserve, bytes calldata rateData) external;

  /**
   * @notice Calculates the interest rates depending on the reserve's state and configurations
   * @param params The parameters needed to calculate interest rates
   * @return liquidityRate The liquidity rate expressed in ray
   * @return variableBorrowRate The variable borrow rate expressed in ray
   */
  function calculateInterestRates(
    DataTypes.CalculateInterestRatesParams memory params
  ) external view returns (uint256, uint256);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/**
 * @title IScaledBalanceToken
 * @author Aave
 * @notice Defines the basic interface for a scaled-balance token.
 */
interface IScaledBalanceToken {
  /**
   * @dev Emitted after the mint action
   * @param caller The address performing the mint
   * @param onBehalfOf The address of the user that will receive the minted tokens
   * @param value The scaled-up amount being minted (based on user entered amount and balance increase from interest)
   * @param balanceIncrease The increase in scaled-up balance since the last action of 'onBehalfOf'
   * @param index The next liquidity index of the reserve
   */
  event Mint(
    address indexed caller,
    address indexed onBehalfOf,
    uint256 value,
    uint256 balanceIncrease,
    uint256 index
  );

  /**
   * @dev Emitted after the burn action
   * @dev If the burn function does not involve a transfer of the underlying asset, the target defaults to zero address
   * @param from The address from which the tokens will be burned
   * @param target The address that will receive the underlying, if any
   * @param value The scaled-up amount being burned (user entered amount - balance increase from interest)
   * @param balanceIncrease The increase in scaled-up balance since the last action of 'from'
   * @param index The next liquidity index of the reserve
   */
  event Burn(
    address indexed from,
    address indexed target,
    uint256 value,
    uint256 balanceIncrease,
    uint256 index
  );

  /**
   * @notice Returns the scaled balance of the user.
   * @dev The scaled balance is the sum of all the updated stored balance divided by the reserve's liquidity index
   * at the moment of the update
   * @param user The user whose balance is calculated
   * @return The scaled balance of the user
   */
  function scaledBalanceOf(address user) external view returns (uint256);

  /**
   * @notice Returns the scaled balance of the user and the scaled total supply.
   * @param user The address of the user
   * @return The scaled balance of the user
   * @return The scaled total supply
   */
  function getScaledUserBalanceAndSupply(address user) external view returns (uint256, uint256);

  /**
   * @notice Returns the scaled total supply of the scaled balance token. Represents sum(debt/index)
   * @return The scaled total supply
   */
  function scaledTotalSupply() external view returns (uint256);

  /**
   * @notice Returns last index interest was accrued to the user's balance
   * @param user The address of the user
   * @return The last index interest was accrued to the user's balance, expressed in ray
   */
  function getPreviousIndex(address user) external view returns (uint256);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {IScaledBalanceToken} from './IScaledBalanceToken.sol';
import {IInitializableDebtToken} from './IInitializableDebtToken.sol';

/**
 * @title IVariableDebtToken
 * @author Aave
 * @notice Defines the basic interface for a variable debt token.
 */
interface IVariableDebtToken is IScaledBalanceToken, IInitializableDebtToken {
  /**
   * @notice Mints debt token to the `onBehalfOf` address
   * @param user The address receiving the borrowed underlying, being the delegatee in case
   * of credit delegate, or same as `onBehalfOf` otherwise
   * @param onBehalfOf The address receiving the debt tokens
   * @param amount The amount of debt being minted
   * @param index The variable debt index of the reserve
   * @return True if the previous balance of the user is 0, false otherwise
   * @return The scaled total debt of the reserve
   */
  function mint(
    address user,
    address onBehalfOf,
    uint256 amount,
    uint256 index
  ) external returns (bool, uint256);

  /**
   * @notice Burns user variable debt
   * @dev In some instances, a burn transaction will emit a mint event
   * if the amount to burn is less than the interest that the user accrued
   * @param from The address from which the debt will be burned
   * @param amount The amount getting burned
   * @param index The variable debt index of the reserve
   * @return The scaled total debt of the reserve
   */
  function burn(address from, uint256 amount, uint256 index) external returns (uint256);

  /**
   * @notice Returns the address of the underlying asset of this debtToken (E.g. WETH for variableDebtWETH)
   * @return The address of the underlying asset
   */
  function UNDERLYING_ASSET_ADDRESS() external view returns (address);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {Errors} from '../helpers/Errors.sol';
import {ReserveConfiguration} from './ReserveConfiguration.sol';

/**
 * @title EModeConfiguration library
 * @author BGD Labs
 * @notice Implements the bitmap logic to handle the eMode configuration
 */
library EModeConfiguration {
  /**
   * @notice Sets a bit in a given bitmap that represents the reserve index range
   * @dev The supplied bitmap is supposed to be a uint128 in which each bit represents a reserve
   * @param bitmap The bitmap
   * @param reserveIndex The index of the reserve in the bitmap
   * @param enabled True if the reserveIndex should be enabled on the bitmap, false otherwise
   * @return The altered bitmap
   */
  function setReserveBitmapBit(
    uint128 bitmap,
    uint256 reserveIndex,
    bool enabled
  ) internal pure returns (uint128) {
    unchecked {
      require(reserveIndex < ReserveConfiguration.MAX_RESERVES_COUNT, Errors.INVALID_RESERVE_INDEX);
      uint128 bit = uint128(1 << reserveIndex);
      if (enabled) {
        return bitmap | bit;
      } else {
        return bitmap & ~bit;
      }
    }
  }

  /**
   * @notice Validates if a reserveIndex is flagged as enabled on a given bitmap
   * @param bitmap The bitmap
   * @param reserveIndex The index of the reserve in the bitmap
   * @return True if the reserveindex is flagged true
   */
  function isReserveEnabledOnBitmap(
    uint128 bitmap,
    uint256 reserveIndex
  ) internal pure returns (bool) {
    unchecked {
      require(reserveIndex < ReserveConfiguration.MAX_RESERVES_COUNT, Errors.INVALID_RESERVE_INDEX);
      return (bitmap >> reserveIndex) & 1 != 0;
    }
  }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {Errors} from '../helpers/Errors.sol';
import {DataTypes} from '../types/DataTypes.sol';

/**
 * @title ReserveConfiguration library
 * @author Aave
 * @notice Implements the bitmap logic to handle the reserve configuration
 */
library ReserveConfiguration {
  uint256 internal constant LTV_MASK =                       0x000000000000000000000000000000000000000000000000000000000000FFFF; // prettier-ignore
  uint256 internal constant LIQUIDATION_THRESHOLD_MASK =     0x00000000000000000000000000000000000000000000000000000000FFFF0000; // prettier-ignore
  uint256 internal constant LIQUIDATION_BONUS_MASK =         0x0000000000000000000000000000000000000000000000000000FFFF00000000; // prettier-ignore
  uint256 internal constant DECIMALS_MASK =                  0x00000000000000000000000000000000000000000000000000FF000000000000; // prettier-ignore
  uint256 internal constant ACTIVE_MASK =                    0x0000000000000000000000000000000000000000000000000100000000000000; // prettier-ignore
  uint256 internal constant FROZEN_MASK =                    0x0000000000000000000000000000000000000000000000000200000000000000; // prettier-ignore
  uint256 internal constant BORROWING_MASK =                 0x0000000000000000000000000000000000000000000000000400000000000000; // prettier-ignore
  // @notice there is an unoccupied hole of 1 bit at position 59 from pre 3.2 stableBorrowRateEnabled
  uint256 internal constant PAUSED_MASK =                    0x0000000000000000000000000000000000000000000000001000000000000000; // prettier-ignore
  uint256 internal constant BORROWABLE_IN_ISOLATION_MASK =   0x0000000000000000000000000000000000000000000000002000000000000000; // prettier-ignore
  uint256 internal constant SILOED_BORROWING_MASK =          0x0000000000000000000000000000000000000000000000004000000000000000; // prettier-ignore
  uint256 internal constant FLASHLOAN_ENABLED_MASK =         0x0000000000000000000000000000000000000000000000008000000000000000; // prettier-ignore
  uint256 internal constant RESERVE_FACTOR_MASK =            0x00000000000000000000000000000000000000000000FFFF0000000000000000; // prettier-ignore
  uint256 internal constant BORROW_CAP_MASK =                0x00000000000000000000000000000000000FFFFFFFFF00000000000000000000; // prettier-ignore
  uint256 internal constant SUPPLY_CAP_MASK =                0x00000000000000000000000000FFFFFFFFF00000000000000000000000000000; // prettier-ignore
  uint256 internal constant LIQUIDATION_PROTOCOL_FEE_MASK =  0x0000000000000000000000FFFF00000000000000000000000000000000000000; // prettier-ignore
  //@notice there is an unoccupied hole of 8 bits from 168 to 176 left from pre 3.2 eModeCategory
  uint256 internal constant UNBACKED_MINT_CAP_MASK =         0x00000000000FFFFFFFFF00000000000000000000000000000000000000000000; // prettier-ignore
  uint256 internal constant DEBT_CEILING_MASK =              0x0FFFFFFFFFF00000000000000000000000000000000000000000000000000000; // prettier-ignore
  uint256 internal constant VIRTUAL_ACC_ACTIVE_MASK =        0x1000000000000000000000000000000000000000000000000000000000000000; // prettier-ignore

  /// @dev For the LTV, the start bit is 0 (up to 15), hence no bitshifting is needed
  uint256 internal constant LIQUIDATION_THRESHOLD_START_BIT_POSITION = 16;
  uint256 internal constant LIQUIDATION_BONUS_START_BIT_POSITION = 32;
  uint256 internal constant RESERVE_DECIMALS_START_BIT_POSITION = 48;
  uint256 internal constant IS_ACTIVE_START_BIT_POSITION = 56;
  uint256 internal constant IS_FROZEN_START_BIT_POSITION = 57;
  uint256 internal constant BORROWING_ENABLED_START_BIT_POSITION = 58;
  uint256 internal constant IS_PAUSED_START_BIT_POSITION = 60;
  uint256 internal constant BORROWABLE_IN_ISOLATION_START_BIT_POSITION = 61;
  uint256 internal constant SILOED_BORROWING_START_BIT_POSITION = 62;
  uint256 internal constant FLASHLOAN_ENABLED_START_BIT_POSITION = 63;
  uint256 internal constant RESERVE_FACTOR_START_BIT_POSITION = 64;
  uint256 internal constant BORROW_CAP_START_BIT_POSITION = 80;
  uint256 internal constant SUPPLY_CAP_START_BIT_POSITION = 116;
  uint256 internal constant LIQUIDATION_PROTOCOL_FEE_START_BIT_POSITION = 152;
  //@notice there is an unoccupied hole of 8 bits from 168 to 176 left from pre 3.2 eModeCategory
  uint256 internal constant UNBACKED_MINT_CAP_START_BIT_POSITION = 176;
  uint256 internal constant DEBT_CEILING_START_BIT_POSITION = 212;
  uint256 internal constant VIRTUAL_ACC_START_BIT_POSITION = 252;

  uint256 internal constant MAX_VALID_LTV = 65535;
  uint256 internal constant MAX_VALID_LIQUIDATION_THRESHOLD = 65535;
  uint256 internal constant MAX_VALID_LIQUIDATION_BONUS = 65535;
  uint256 internal constant MAX_VALID_DECIMALS = 255;
  uint256 internal constant MAX_VALID_RESERVE_FACTOR = 65535;
  uint256 internal constant MAX_VALID_BORROW_CAP = 68719476735;
  uint256 internal constant MAX_VALID_SUPPLY_CAP = 68719476735;
  uint256 internal constant MAX_VALID_LIQUIDATION_PROTOCOL_FEE = 65535;
  uint256 internal constant MAX_VALID_UNBACKED_MINT_CAP = 68719476735;
  uint256 internal constant MAX_VALID_DEBT_CEILING = 1099511627775;

  uint256 public constant DEBT_CEILING_DECIMALS = 2;
  uint16 public constant MAX_RESERVES_COUNT = 128;

  /**
   * @notice Sets the Loan to Value of the reserve
   * @param self The reserve configuration
   * @param ltv The new ltv
   */
  function setLtv(DataTypes.ReserveConfigurationMap memory self, uint256 ltv) internal pure {
    require(ltv <= MAX_VALID_LTV, Errors.INVALID_LTV);

    self.data = (self.data & ~LTV_MASK) | ltv;
  }

  /**
   * @notice Gets the Loan to Value of the reserve
   * @param self The reserve configuration
   * @return The loan to value
   */
  function getLtv(DataTypes.ReserveConfigurationMap memory self) internal pure returns (uint256) {
    return self.data & LTV_MASK;
  }

  /**
   * @notice Sets the liquidation threshold of the reserve
   * @param self The reserve configuration
   * @param threshold The new liquidation threshold
   */
  function setLiquidationThreshold(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 threshold
  ) internal pure {
    require(threshold <= MAX_VALID_LIQUIDATION_THRESHOLD, Errors.INVALID_LIQ_THRESHOLD);

    self.data =
      (self.data & ~LIQUIDATION_THRESHOLD_MASK) |
      (threshold << LIQUIDATION_THRESHOLD_START_BIT_POSITION);
  }

  /**
   * @notice Gets the liquidation threshold of the reserve
   * @param self The reserve configuration
   * @return The liquidation threshold
   */
  function getLiquidationThreshold(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & LIQUIDATION_THRESHOLD_MASK) >> LIQUIDATION_THRESHOLD_START_BIT_POSITION;
  }

  /**
   * @notice Sets the liquidation bonus of the reserve
   * @param self The reserve configuration
   * @param bonus The new liquidation bonus
   */
  function setLiquidationBonus(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 bonus
  ) internal pure {
    require(bonus <= MAX_VALID_LIQUIDATION_BONUS, Errors.INVALID_LIQ_BONUS);

    self.data =
      (self.data & ~LIQUIDATION_BONUS_MASK) |
      (bonus << LIQUIDATION_BONUS_START_BIT_POSITION);
  }

  /**
   * @notice Gets the liquidation bonus of the reserve
   * @param self The reserve configuration
   * @return The liquidation bonus
   */
  function getLiquidationBonus(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & LIQUIDATION_BONUS_MASK) >> LIQUIDATION_BONUS_START_BIT_POSITION;
  }

  /**
   * @notice Sets the decimals of the underlying asset of the reserve
   * @param self The reserve configuration
   * @param decimals The decimals
   */
  function setDecimals(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 decimals
  ) internal pure {
    require(decimals <= MAX_VALID_DECIMALS, Errors.INVALID_DECIMALS);

    self.data = (self.data & ~DECIMALS_MASK) | (decimals << RESERVE_DECIMALS_START_BIT_POSITION);
  }

  /**
   * @notice Gets the decimals of the underlying asset of the reserve
   * @param self The reserve configuration
   * @return The decimals of the asset
   */
  function getDecimals(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & DECIMALS_MASK) >> RESERVE_DECIMALS_START_BIT_POSITION;
  }

  /**
   * @notice Sets the active state of the reserve
   * @param self The reserve configuration
   * @param active The active state
   */
  function setActive(DataTypes.ReserveConfigurationMap memory self, bool active) internal pure {
    self.data =
      (self.data & ~ACTIVE_MASK) |
      (uint256(active ? 1 : 0) << IS_ACTIVE_START_BIT_POSITION);
  }

  /**
   * @notice Gets the active state of the reserve
   * @param self The reserve configuration
   * @return The active state
   */
  function getActive(DataTypes.ReserveConfigurationMap memory self) internal pure returns (bool) {
    return (self.data & ACTIVE_MASK) != 0;
  }

  /**
   * @notice Sets the frozen state of the reserve
   * @param self The reserve configuration
   * @param frozen The frozen state
   */
  function setFrozen(DataTypes.ReserveConfigurationMap memory self, bool frozen) internal pure {
    self.data =
      (self.data & ~FROZEN_MASK) |
      (uint256(frozen ? 1 : 0) << IS_FROZEN_START_BIT_POSITION);
  }

  /**
   * @notice Gets the frozen state of the reserve
   * @param self The reserve configuration
   * @return The frozen state
   */
  function getFrozen(DataTypes.ReserveConfigurationMap memory self) internal pure returns (bool) {
    return (self.data & FROZEN_MASK) != 0;
  }

  /**
   * @notice Sets the paused state of the reserve
   * @param self The reserve configuration
   * @param paused The paused state
   */
  function setPaused(DataTypes.ReserveConfigurationMap memory self, bool paused) internal pure {
    self.data =
      (self.data & ~PAUSED_MASK) |
      (uint256(paused ? 1 : 0) << IS_PAUSED_START_BIT_POSITION);
  }

  /**
   * @notice Gets the paused state of the reserve
   * @param self The reserve configuration
   * @return The paused state
   */
  function getPaused(DataTypes.ReserveConfigurationMap memory self) internal pure returns (bool) {
    return (self.data & PAUSED_MASK) != 0;
  }

  /**
   * @notice Sets the borrowable in isolation flag for the reserve.
   * @dev When this flag is set to true, the asset will be borrowable against isolated collaterals and the borrowed
   * amount will be accumulated in the isolated collateral's total debt exposure.
   * @dev Only assets of the same family (eg USD stablecoins) should be borrowable in isolation mode to keep
   * consistency in the debt ceiling calculations.
   * @param self The reserve configuration
   * @param borrowable True if the asset is borrowable
   */
  function setBorrowableInIsolation(
    DataTypes.ReserveConfigurationMap memory self,
    bool borrowable
  ) internal pure {
    self.data =
      (self.data & ~BORROWABLE_IN_ISOLATION_MASK) |
      (uint256(borrowable ? 1 : 0) << BORROWABLE_IN_ISOLATION_START_BIT_POSITION);
  }

  /**
   * @notice Gets the borrowable in isolation flag for the reserve.
   * @dev If the returned flag is true, the asset is borrowable against isolated collateral. Assets borrowed with
   * isolated collateral is accounted for in the isolated collateral's total debt exposure.
   * @dev Only assets of the same family (eg USD stablecoins) should be borrowable in isolation mode to keep
   * consistency in the debt ceiling calculations.
   * @param self The reserve configuration
   * @return The borrowable in isolation flag
   */
  function getBorrowableInIsolation(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (bool) {
    return (self.data & BORROWABLE_IN_ISOLATION_MASK) != 0;
  }

  /**
   * @notice Sets the siloed borrowing flag for the reserve.
   * @dev When this flag is set to true, users borrowing this asset will not be allowed to borrow any other asset.
   * @param self The reserve configuration
   * @param siloed True if the asset is siloed
   */
  function setSiloedBorrowing(
    DataTypes.ReserveConfigurationMap memory self,
    bool siloed
  ) internal pure {
    self.data =
      (self.data & ~SILOED_BORROWING_MASK) |
      (uint256(siloed ? 1 : 0) << SILOED_BORROWING_START_BIT_POSITION);
  }

  /**
   * @notice Gets the siloed borrowing flag for the reserve.
   * @dev When this flag is set to true, users borrowing this asset will not be allowed to borrow any other asset.
   * @param self The reserve configuration
   * @return The siloed borrowing flag
   */
  function getSiloedBorrowing(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (bool) {
    return (self.data & SILOED_BORROWING_MASK) != 0;
  }

  /**
   * @notice Enables or disables borrowing on the reserve
   * @param self The reserve configuration
   * @param enabled True if the borrowing needs to be enabled, false otherwise
   */
  function setBorrowingEnabled(
    DataTypes.ReserveConfigurationMap memory self,
    bool enabled
  ) internal pure {
    self.data =
      (self.data & ~BORROWING_MASK) |
      (uint256(enabled ? 1 : 0) << BORROWING_ENABLED_START_BIT_POSITION);
  }

  /**
   * @notice Gets the borrowing state of the reserve
   * @param self The reserve configuration
   * @return The borrowing state
   */
  function getBorrowingEnabled(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (bool) {
    return (self.data & BORROWING_MASK) != 0;
  }

  /**
   * @notice Sets the reserve factor of the reserve
   * @param self The reserve configuration
   * @param reserveFactor The reserve factor
   */
  function setReserveFactor(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 reserveFactor
  ) internal pure {
    require(reserveFactor <= MAX_VALID_RESERVE_FACTOR, Errors.INVALID_RESERVE_FACTOR);

    self.data =
      (self.data & ~RESERVE_FACTOR_MASK) |
      (reserveFactor << RESERVE_FACTOR_START_BIT_POSITION);
  }

  /**
   * @notice Gets the reserve factor of the reserve
   * @param self The reserve configuration
   * @return The reserve factor
   */
  function getReserveFactor(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & RESERVE_FACTOR_MASK) >> RESERVE_FACTOR_START_BIT_POSITION;
  }

  /**
   * @notice Sets the borrow cap of the reserve
   * @param self The reserve configuration
   * @param borrowCap The borrow cap
   */
  function setBorrowCap(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 borrowCap
  ) internal pure {
    require(borrowCap <= MAX_VALID_BORROW_CAP, Errors.INVALID_BORROW_CAP);

    self.data = (self.data & ~BORROW_CAP_MASK) | (borrowCap << BORROW_CAP_START_BIT_POSITION);
  }

  /**
   * @notice Gets the borrow cap of the reserve
   * @param self The reserve configuration
   * @return The borrow cap
   */
  function getBorrowCap(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & BORROW_CAP_MASK) >> BORROW_CAP_START_BIT_POSITION;
  }

  /**
   * @notice Sets the supply cap of the reserve
   * @param self The reserve configuration
   * @param supplyCap The supply cap
   */
  function setSupplyCap(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 supplyCap
  ) internal pure {
    require(supplyCap <= MAX_VALID_SUPPLY_CAP, Errors.INVALID_SUPPLY_CAP);

    self.data = (self.data & ~SUPPLY_CAP_MASK) | (supplyCap << SUPPLY_CAP_START_BIT_POSITION);
  }

  /**
   * @notice Gets the supply cap of the reserve
   * @param self The reserve configuration
   * @return The supply cap
   */
  function getSupplyCap(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & SUPPLY_CAP_MASK) >> SUPPLY_CAP_START_BIT_POSITION;
  }

  /**
   * @notice Sets the debt ceiling in isolation mode for the asset
   * @param self The reserve configuration
   * @param ceiling The maximum debt ceiling for the asset
   */
  function setDebtCeiling(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 ceiling
  ) internal pure {
    require(ceiling <= MAX_VALID_DEBT_CEILING, Errors.INVALID_DEBT_CEILING);

    self.data = (self.data & ~DEBT_CEILING_MASK) | (ceiling << DEBT_CEILING_START_BIT_POSITION);
  }

  /**
   * @notice Gets the debt ceiling for the asset if the asset is in isolation mode
   * @param self The reserve configuration
   * @return The debt ceiling (0 = isolation mode disabled)
   */
  function getDebtCeiling(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & DEBT_CEILING_MASK) >> DEBT_CEILING_START_BIT_POSITION;
  }

  /**
   * @notice Sets the liquidation protocol fee of the reserve
   * @param self The reserve configuration
   * @param liquidationProtocolFee The liquidation protocol fee
   */
  function setLiquidationProtocolFee(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 liquidationProtocolFee
  ) internal pure {
    require(
      liquidationProtocolFee <= MAX_VALID_LIQUIDATION_PROTOCOL_FEE,
      Errors.INVALID_LIQUIDATION_PROTOCOL_FEE
    );

    self.data =
      (self.data & ~LIQUIDATION_PROTOCOL_FEE_MASK) |
      (liquidationProtocolFee << LIQUIDATION_PROTOCOL_FEE_START_BIT_POSITION);
  }

  /**
   * @dev Gets the liquidation protocol fee
   * @param self The reserve configuration
   * @return The liquidation protocol fee
   */
  function getLiquidationProtocolFee(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return
      (self.data & LIQUIDATION_PROTOCOL_FEE_MASK) >> LIQUIDATION_PROTOCOL_FEE_START_BIT_POSITION;
  }

  /**
   * @notice Sets the unbacked mint cap of the reserve
   * @param self The reserve configuration
   * @param unbackedMintCap The unbacked mint cap
   */
  function setUnbackedMintCap(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 unbackedMintCap
  ) internal pure {
    require(unbackedMintCap <= MAX_VALID_UNBACKED_MINT_CAP, Errors.INVALID_UNBACKED_MINT_CAP);

    self.data =
      (self.data & ~UNBACKED_MINT_CAP_MASK) |
      (unbackedMintCap << UNBACKED_MINT_CAP_START_BIT_POSITION);
  }

  /**
   * @dev Gets the unbacked mint cap of the reserve
   * @param self The reserve configuration
   * @return The unbacked mint cap
   */
  function getUnbackedMintCap(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & UNBACKED_MINT_CAP_MASK) >> UNBACKED_MINT_CAP_START_BIT_POSITION;
  }

  /**
   * @notice Sets the flashloanable flag for the reserve
   * @param self The reserve configuration
   * @param flashLoanEnabled True if the asset is flashloanable, false otherwise
   */
  function setFlashLoanEnabled(
    DataTypes.ReserveConfigurationMap memory self,
    bool flashLoanEnabled
  ) internal pure {
    self.data =
      (self.data & ~FLASHLOAN_ENABLED_MASK) |
      (uint256(flashLoanEnabled ? 1 : 0) << FLASHLOAN_ENABLED_START_BIT_POSITION);
  }

  /**
   * @notice Gets the flashloanable flag for the reserve
   * @param self The reserve configuration
   * @return The flashloanable flag
   */
  function getFlashLoanEnabled(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (bool) {
    return (self.data & FLASHLOAN_ENABLED_MASK) != 0;
  }

  /**
   * @notice Sets the virtual account active/not state of the reserve
   * @param self The reserve configuration
   * @param active The active state
   */
  function setVirtualAccActive(
    DataTypes.ReserveConfigurationMap memory self,
    bool active
  ) internal pure {
    self.data =
      (self.data & ~VIRTUAL_ACC_ACTIVE_MASK) |
      (uint256(active ? 1 : 0) << VIRTUAL_ACC_START_BIT_POSITION);
  }

  /**
   * @notice Gets the virtual account active/not state of the reserve
   * @dev The state should be true for all normal assets and should be false
   * Virtual accounting being disabled means that the asset:
   * - is GHO
   * - can never be supplied
   * - the interest rate strategy is not influenced by the virtual balance
   * @param self The reserve configuration
   * @return The active state
   */
  function getIsVirtualAccActive(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (bool) {
    return (self.data & VIRTUAL_ACC_ACTIVE_MASK) != 0;
  }

  /**
   * @notice Gets the configuration flags of the reserve
   * @param self The reserve configuration
   * @return The state flag representing active
   * @return The state flag representing frozen
   * @return The state flag representing borrowing enabled
   * @return The state flag representing paused
   */
  function getFlags(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (bool, bool, bool, bool) {
    uint256 dataLocal = self.data;

    return (
      (dataLocal & ACTIVE_MASK) != 0,
      (dataLocal & FROZEN_MASK) != 0,
      (dataLocal & BORROWING_MASK) != 0,
      (dataLocal & PAUSED_MASK) != 0
    );
  }

  /**
   * @notice Gets the configuration parameters of the reserve from storage
   * @param self The reserve configuration
   * @return The state param representing ltv
   * @return The state param representing liquidation threshold
   * @return The state param representing liquidation bonus
   * @return The state param representing reserve decimals
   * @return The state param representing reserve factor
   */
  function getParams(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256, uint256, uint256, uint256, uint256) {
    uint256 dataLocal = self.data;

    return (
      dataLocal & LTV_MASK,
      (dataLocal & LIQUIDATION_THRESHOLD_MASK) >> LIQUIDATION_THRESHOLD_START_BIT_POSITION,
      (dataLocal & LIQUIDATION_BONUS_MASK) >> LIQUIDATION_BONUS_START_BIT_POSITION,
      (dataLocal & DECIMALS_MASK) >> RESERVE_DECIMALS_START_BIT_POSITION,
      (dataLocal & RESERVE_FACTOR_MASK) >> RESERVE_FACTOR_START_BIT_POSITION
    );
  }

  /**
   * @notice Gets the caps parameters of the reserve from storage
   * @param self The reserve configuration
   * @return The state param representing borrow cap
   * @return The state param representing supply cap.
   */
  function getCaps(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256, uint256) {
    uint256 dataLocal = self.data;

    return (
      (dataLocal & BORROW_CAP_MASK) >> BORROW_CAP_START_BIT_POSITION,
      (dataLocal & SUPPLY_CAP_MASK) >> SUPPLY_CAP_START_BIT_POSITION
    );
  }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {Errors} from '../helpers/Errors.sol';
import {DataTypes} from '../types/DataTypes.sol';
import {ReserveConfiguration} from './ReserveConfiguration.sol';

/**
 * @title UserConfiguration library
 * @author Aave
 * @notice Implements the bitmap logic to handle the user configuration
 */
library UserConfiguration {
  using ReserveConfiguration for DataTypes.ReserveConfigurationMap;

  uint256 internal constant BORROWING_MASK =
    0x5555555555555555555555555555555555555555555555555555555555555555;
  uint256 internal constant COLLATERAL_MASK =
    0xAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA;

  /**
   * @notice Sets if the user is borrowing the reserve identified by reserveIndex
   * @param self The configuration object
   * @param reserveIndex The index of the reserve in the bitmap
   * @param borrowing True if the user is borrowing the reserve, false otherwise
   */
  function setBorrowing(
    DataTypes.UserConfigurationMap storage self,
    uint256 reserveIndex,
    bool borrowing
  ) internal {
    unchecked {
      require(reserveIndex < ReserveConfiguration.MAX_RESERVES_COUNT, Errors.INVALID_RESERVE_INDEX);
      uint256 bit = 1 << (reserveIndex << 1);
      if (borrowing) {
        self.data |= bit;
      } else {
        self.data &= ~bit;
      }
    }
  }

  /**
   * @notice Sets if the user is using as collateral the reserve identified by reserveIndex
   * @param self The configuration object
   * @param reserveIndex The index of the reserve in the bitmap
   * @param usingAsCollateral True if the user is using the reserve as collateral, false otherwise
   */
  function setUsingAsCollateral(
    DataTypes.UserConfigurationMap storage self,
    uint256 reserveIndex,
    bool usingAsCollateral
  ) internal {
    unchecked {
      require(reserveIndex < ReserveConfiguration.MAX_RESERVES_COUNT, Errors.INVALID_RESERVE_INDEX);
      uint256 bit = 1 << ((reserveIndex << 1) + 1);
      if (usingAsCollateral) {
        self.data |= bit;
      } else {
        self.data &= ~bit;
      }
    }
  }

  /**
   * @notice Returns if a user has been using the reserve for borrowing or as collateral
   * @param self The configuration object
   * @param reserveIndex The index of the reserve in the bitmap
   * @return True if the user has been using a reserve for borrowing or as collateral, false otherwise
   */
  function isUsingAsCollateralOrBorrowing(
    DataTypes.UserConfigurationMap memory self,
    uint256 reserveIndex
  ) internal pure returns (bool) {
    unchecked {
      require(reserveIndex < ReserveConfiguration.MAX_RESERVES_COUNT, Errors.INVALID_RESERVE_INDEX);
      return (self.data >> (reserveIndex << 1)) & 3 != 0;
    }
  }

  /**
   * @notice Validate a user has been using the reserve for borrowing
   * @param self The configuration object
   * @param reserveIndex The index of the reserve in the bitmap
   * @return True if the user has been using a reserve for borrowing, false otherwise
   */
  function isBorrowing(
    DataTypes.UserConfigurationMap memory self,
    uint256 reserveIndex
  ) internal pure returns (bool) {
    unchecked {
      require(reserveIndex < ReserveConfiguration.MAX_RESERVES_COUNT, Errors.INVALID_RESERVE_INDEX);
      return (self.data >> (reserveIndex << 1)) & 1 != 0;
    }
  }

  /**
   * @notice Validate a user has been using the reserve as collateral
   * @param self The configuration object
   * @param reserveIndex The index of the reserve in the bitmap
   * @return True if the user has been using a reserve as collateral, false otherwise
   */
  function isUsingAsCollateral(
    DataTypes.UserConfigurationMap memory self,
    uint256 reserveIndex
  ) internal pure returns (bool) {
    unchecked {
      require(reserveIndex < ReserveConfiguration.MAX_RESERVES_COUNT, Errors.INVALID_RESERVE_INDEX);
      return (self.data >> ((reserveIndex << 1) + 1)) & 1 != 0;
    }
  }

  /**
   * @notice Checks if a user has been supplying only one reserve as collateral
   * @dev this uses a simple trick - if a number is a power of two (only one bit set) then n & (n - 1) == 0
   * @param self The configuration object
   * @return True if the user has been supplying as collateral one reserve, false otherwise
   */
  function isUsingAsCollateralOne(
    DataTypes.UserConfigurationMap memory self
  ) internal pure returns (bool) {
    uint256 collateralData = self.data & COLLATERAL_MASK;
    return collateralData != 0 && (collateralData & (collateralData - 1) == 0);
  }

  /**
   * @notice Checks if a user has been supplying any reserve as collateral
   * @param self The configuration object
   * @return True if the user has been supplying as collateral any reserve, false otherwise
   */
  function isUsingAsCollateralAny(
    DataTypes.UserConfigurationMap memory self
  ) internal pure returns (bool) {
    return self.data & COLLATERAL_MASK != 0;
  }

  /**
   * @notice Checks if a user has been borrowing only one asset
   * @dev this uses a simple trick - if a number is a power of two (only one bit set) then n & (n - 1) == 0
   * @param self The configuration object
   * @return True if the user has been supplying as collateral one reserve, false otherwise
   */
  function isBorrowingOne(DataTypes.UserConfigurationMap memory self) internal pure returns (bool) {
    uint256 borrowingData = self.data & BORROWING_MASK;
    return borrowingData != 0 && (borrowingData & (borrowingData - 1) == 0);
  }

  /**
   * @notice Checks if a user has been borrowing from any reserve
   * @param self The configuration object
   * @return True if the user has been borrowing any reserve, false otherwise
   */
  function isBorrowingAny(DataTypes.UserConfigurationMap memory self) internal pure returns (bool) {
    return self.data & BORROWING_MASK != 0;
  }

  /**
   * @notice Checks if a user has not been using any reserve for borrowing or supply
   * @param self The configuration object
   * @return True if the user has not been borrowing or supplying any reserve, false otherwise
   */
  function isEmpty(DataTypes.UserConfigurationMap memory self) internal pure returns (bool) {
    return self.data == 0;
  }

  /**
   * @notice Returns the Isolation Mode state of the user
   * @param self The configuration object
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @return True if the user is in isolation mode, false otherwise
   * @return The address of the only asset used as collateral
   * @return The debt ceiling of the reserve
   */
  function getIsolationModeState(
    DataTypes.UserConfigurationMap memory self,
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList
  ) internal view returns (bool, address, uint256) {
    if (isUsingAsCollateralOne(self)) {
      uint256 assetId = _getFirstAssetIdByMask(self, COLLATERAL_MASK);

      address assetAddress = reservesList[assetId];
      uint256 ceiling = reservesData[assetAddress].configuration.getDebtCeiling();
      if (ceiling != 0) {
        return (true, assetAddress, ceiling);
      }
    }
    return (false, address(0), 0);
  }

  /**
   * @notice Returns the siloed borrowing state for the user
   * @param self The configuration object
   * @param reservesData The data of all the reserves
   * @param reservesList The reserve list
   * @return True if the user has borrowed a siloed asset, false otherwise
   * @return The address of the only borrowed asset
   */
  function getSiloedBorrowingState(
    DataTypes.UserConfigurationMap memory self,
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList
  ) internal view returns (bool, address) {
    if (isBorrowingOne(self)) {
      uint256 assetId = _getFirstAssetIdByMask(self, BORROWING_MASK);
      address assetAddress = reservesList[assetId];
      if (reservesData[assetAddress].configuration.getSiloedBorrowing()) {
        return (true, assetAddress);
      }
    }

    return (false, address(0));
  }

  /**
   * @notice Returns the address of the first asset flagged in the bitmap given the corresponding bitmask
   * @param self The configuration object
   * @return The index of the first asset flagged in the bitmap once the corresponding mask is applied
   */
  function _getFirstAssetIdByMask(
    DataTypes.UserConfigurationMap memory self,
    uint256 mask
  ) internal pure returns (uint256) {
    unchecked {
      uint256 bitmapData = self.data & mask;
      uint256 firstAssetPosition = bitmapData & ~(bitmapData - 1);
      uint256 id;

      while ((firstAssetPosition >>= 2) != 0) {
        id += 1;
      }
      return id;
    }
  }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/**
 * @title Errors library
 * @author Aave
 * @notice Defines the error messages emitted by the different contracts of the Aave protocol
 */
library Errors {
  string public constant CALLER_NOT_POOL_ADMIN = '1'; // 'The caller of the function is not a pool admin'
  string public constant CALLER_NOT_EMERGENCY_ADMIN = '2'; // 'The caller of the function is not an emergency admin'
  string public constant CALLER_NOT_POOL_OR_EMERGENCY_ADMIN = '3'; // 'The caller of the function is not a pool or emergency admin'
  string public constant CALLER_NOT_RISK_OR_POOL_ADMIN = '4'; // 'The caller of the function is not a risk or pool admin'
  string public constant CALLER_NOT_ASSET_LISTING_OR_POOL_ADMIN = '5'; // 'The caller of the function is not an asset listing or pool admin'
  string public constant CALLER_NOT_BRIDGE = '6'; // 'The caller of the function is not a bridge'
  string public constant ADDRESSES_PROVIDER_NOT_REGISTERED = '7'; // 'Pool addresses provider is not registered'
  string public constant INVALID_ADDRESSES_PROVIDER_ID = '8'; // 'Invalid id for the pool addresses provider'
  string public constant NOT_CONTRACT = '9'; // 'Address is not a contract'
  string public constant CALLER_NOT_POOL_CONFIGURATOR = '10'; // 'The caller of the function is not the pool configurator'
  string public constant CALLER_NOT_ATOKEN = '11'; // 'The caller of the function is not an AToken'
  string public constant INVALID_ADDRESSES_PROVIDER = '12'; // 'The address of the pool addresses provider is invalid'
  string public constant INVALID_FLASHLOAN_EXECUTOR_RETURN = '13'; // 'Invalid return value of the flashloan executor function'
  string public constant RESERVE_ALREADY_ADDED = '14'; // 'Reserve has already been added to reserve list'
  string public constant NO_MORE_RESERVES_ALLOWED = '15'; // 'Maximum amount of reserves in the pool reached'
  string public constant EMODE_CATEGORY_RESERVED = '16'; // 'Zero eMode category is reserved for volatile heterogeneous assets'
  string public constant INVALID_EMODE_CATEGORY_ASSIGNMENT = '17'; // 'Invalid eMode category assignment to asset'
  string public constant RESERVE_LIQUIDITY_NOT_ZERO = '18'; // 'The liquidity of the reserve needs to be 0'
  string public constant FLASHLOAN_PREMIUM_INVALID = '19'; // 'Invalid flashloan premium'
  string public constant INVALID_RESERVE_PARAMS = '20'; // 'Invalid risk parameters for the reserve'
  string public constant INVALID_EMODE_CATEGORY_PARAMS = '21'; // 'Invalid risk parameters for the eMode category'
  string public constant BRIDGE_PROTOCOL_FEE_INVALID = '22'; // 'Invalid bridge protocol fee'
  string public constant CALLER_MUST_BE_POOL = '23'; // 'The caller of this function must be a pool'
  string public constant INVALID_MINT_AMOUNT = '24'; // 'Invalid amount to mint'
  string public constant INVALID_BURN_AMOUNT = '25'; // 'Invalid amount to burn'
  string public constant INVALID_AMOUNT = '26'; // 'Amount must be greater than 0'
  string public constant RESERVE_INACTIVE = '27'; // 'Action requires an active reserve'
  string public constant RESERVE_FROZEN = '28'; // 'Action cannot be performed because the reserve is frozen'
  string public constant RESERVE_PAUSED = '29'; // 'Action cannot be performed because the reserve is paused'
  string public constant BORROWING_NOT_ENABLED = '30'; // 'Borrowing is not enabled'
  string public constant NOT_ENOUGH_AVAILABLE_USER_BALANCE = '32'; // 'User cannot withdraw more than the available balance'
  string public constant INVALID_INTEREST_RATE_MODE_SELECTED = '33'; // 'Invalid interest rate mode selected'
  string public constant COLLATERAL_BALANCE_IS_ZERO = '34'; // 'The collateral balance is 0'
  string public constant HEALTH_FACTOR_LOWER_THAN_LIQUIDATION_THRESHOLD = '35'; // 'Health factor is lesser than the liquidation threshold'
  string public constant COLLATERAL_CANNOT_COVER_NEW_BORROW = '36'; // 'There is not enough collateral to cover a new borrow'
  string public constant COLLATERAL_SAME_AS_BORROWING_CURRENCY = '37'; // 'Collateral is (mostly) the same currency that is being borrowed'
  string public constant NO_DEBT_OF_SELECTED_TYPE = '39'; // 'For repayment of a specific type of debt, the user needs to have debt that type'
  string public constant NO_EXPLICIT_AMOUNT_TO_REPAY_ON_BEHALF = '40'; // 'To repay on behalf of a user an explicit amount to repay is needed'
  string public constant NO_OUTSTANDING_VARIABLE_DEBT = '42'; // 'User does not have outstanding variable rate debt on this reserve'
  string public constant UNDERLYING_BALANCE_ZERO = '43'; // 'The underlying balance needs to be greater than 0'
  string public constant INTEREST_RATE_REBALANCE_CONDITIONS_NOT_MET = '44'; // 'Interest rate rebalance conditions were not met'
  string public constant HEALTH_FACTOR_NOT_BELOW_THRESHOLD = '45'; // 'Health factor is not below the threshold'
  string public constant COLLATERAL_CANNOT_BE_LIQUIDATED = '46'; // 'The collateral chosen cannot be liquidated'
  string public constant SPECIFIED_CURRENCY_NOT_BORROWED_BY_USER = '47'; // 'User did not borrow the specified currency'
  string public constant INCONSISTENT_FLASHLOAN_PARAMS = '49'; // 'Inconsistent flashloan parameters'
  string public constant BORROW_CAP_EXCEEDED = '50'; // 'Borrow cap is exceeded'
  string public constant SUPPLY_CAP_EXCEEDED = '51'; // 'Supply cap is exceeded'
  string public constant UNBACKED_MINT_CAP_EXCEEDED = '52'; // 'Unbacked mint cap is exceeded'
  string public constant DEBT_CEILING_EXCEEDED = '53'; // 'Debt ceiling is exceeded'
  string public constant UNDERLYING_CLAIMABLE_RIGHTS_NOT_ZERO = '54'; // 'Claimable rights over underlying not zero (aToken supply or accruedToTreasury)'
  string public constant VARIABLE_DEBT_SUPPLY_NOT_ZERO = '56'; // 'Variable debt supply is not zero'
  string public constant LTV_VALIDATION_FAILED = '57'; // 'Ltv validation failed'
  string public constant INCONSISTENT_EMODE_CATEGORY = '58'; // 'Inconsistent eMode category'
  string public constant PRICE_ORACLE_SENTINEL_CHECK_FAILED = '59'; // 'Price oracle sentinel validation failed'
  string public constant ASSET_NOT_BORROWABLE_IN_ISOLATION = '60'; // 'Asset is not borrowable in isolation mode'
  string public constant RESERVE_ALREADY_INITIALIZED = '61'; // 'Reserve has already been initialized'
  string public constant USER_IN_ISOLATION_MODE_OR_LTV_ZERO = '62'; // 'User is in isolation mode or ltv is zero'
  string public constant INVALID_LTV = '63'; // 'Invalid ltv parameter for the reserve'
  string public constant INVALID_LIQ_THRESHOLD = '64'; // 'Invalid liquidity threshold parameter for the reserve'
  string public constant INVALID_LIQ_BONUS = '65'; // 'Invalid liquidity bonus parameter for the reserve'
  string public constant INVALID_DECIMALS = '66'; // 'Invalid decimals parameter of the underlying asset of the reserve'
  string public constant INVALID_RESERVE_FACTOR = '67'; // 'Invalid reserve factor parameter for the reserve'
  string public constant INVALID_BORROW_CAP = '68'; // 'Invalid borrow cap for the reserve'
  string public constant INVALID_SUPPLY_CAP = '69'; // 'Invalid supply cap for the reserve'
  string public constant INVALID_LIQUIDATION_PROTOCOL_FEE = '70'; // 'Invalid liquidation protocol fee for the reserve'
  string public constant INVALID_EMODE_CATEGORY = '71'; // 'Invalid eMode category for the reserve'
  string public constant INVALID_UNBACKED_MINT_CAP = '72'; // 'Invalid unbacked mint cap for the reserve'
  string public constant INVALID_DEBT_CEILING = '73'; // 'Invalid debt ceiling for the reserve
  string public constant INVALID_RESERVE_INDEX = '74'; // 'Invalid reserve index'
  string public constant ACL_ADMIN_CANNOT_BE_ZERO = '75'; // 'ACL admin cannot be set to the zero address'
  string public constant INCONSISTENT_PARAMS_LENGTH = '76'; // 'Array parameters that should be equal length are not'
  string public constant ZERO_ADDRESS_NOT_VALID = '77'; // 'Zero address not valid'
  string public constant INVALID_EXPIRATION = '78'; // 'Invalid expiration'
  string public constant INVALID_SIGNATURE = '79'; // 'Invalid signature'
  string public constant OPERATION_NOT_SUPPORTED = '80'; // 'Operation not supported'
  string public constant DEBT_CEILING_NOT_ZERO = '81'; // 'Debt ceiling is not zero'
  string public constant ASSET_NOT_LISTED = '82'; // 'Asset is not listed'
  string public constant INVALID_OPTIMAL_USAGE_RATIO = '83'; // 'Invalid optimal usage ratio'
  string public constant UNDERLYING_CANNOT_BE_RESCUED = '85'; // 'The underlying asset cannot be rescued'
  string public constant ADDRESSES_PROVIDER_ALREADY_ADDED = '86'; // 'Reserve has already been added to reserve list'
  string public constant POOL_ADDRESSES_DO_NOT_MATCH = '87'; // 'The token implementation pool address and the pool address provided by the initializing pool do not match'
  string public constant SILOED_BORROWING_VIOLATION = '89'; // 'User is trying to borrow multiple assets including a siloed one'
  string public constant RESERVE_DEBT_NOT_ZERO = '90'; // the total debt of the reserve needs to be 0
  string public constant FLASHLOAN_DISABLED = '91'; // FlashLoaning for this asset is disabled
  string public constant INVALID_MAX_RATE = '92'; // The expect maximum borrow rate is invalid
  string public constant WITHDRAW_TO_ATOKEN = '93'; // Withdrawing to the aToken is not allowed
  string public constant SUPPLY_TO_ATOKEN = '94'; // Supplying to the aToken is not allowed
  string public constant SLOPE_2_MUST_BE_GTE_SLOPE_1 = '95'; // Variable interest rate slope 2 can not be lower than slope 1
  string public constant CALLER_NOT_RISK_OR_POOL_OR_EMERGENCY_ADMIN = '96'; // 'The caller of the function is not a risk, pool or emergency admin'
  string public constant LIQUIDATION_GRACE_SENTINEL_CHECK_FAILED = '97'; // 'Liquidation grace sentinel validation failed'
  string public constant INVALID_GRACE_PERIOD = '98'; // Grace period above a valid range
  string public constant INVALID_FREEZE_STATE = '99'; // Reserve is already in the passed freeze state
  string public constant NOT_BORROWABLE_IN_EMODE = '100'; // Asset not borrowable in eMode
  string public constant CALLER_NOT_UMBRELLA = '101'; // The caller of the function is not the umbrella contract
  string public constant RESERVE_NOT_IN_DEFICIT = '102'; // The reserve is not in deficit
  string public constant MUST_NOT_LEAVE_DUST = '103'; // Below a certain threshold liquidators need to take the full position
  string public constant USER_CANNOT_HAVE_DEBT = '104'; // Thrown when a user tries to interact with a method that requires a position without debt
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.10;

import {GPv2SafeERC20} from '../../../dependencies/gnosis/contracts/GPv2SafeERC20.sol';
import {IERC20} from '../../../dependencies/openzeppelin/contracts/IERC20.sol';
import {UserConfiguration} from '../configuration/UserConfiguration.sol';
import {WadRayMath} from '../math/WadRayMath.sol';
import {PercentageMath} from '../math/PercentageMath.sol';
import {DataTypes} from '../types/DataTypes.sol';
import {ValidationLogic} from './ValidationLogic.sol';
import {ReserveLogic} from './ReserveLogic.sol';

/**
 * @title EModeLogic library
 * @author Aave
 * @notice Implements the base logic for all the actions related to the eMode
 */
library EModeLogic {
  using ReserveLogic for DataTypes.ReserveCache;
  using ReserveLogic for DataTypes.ReserveData;
  using GPv2SafeERC20 for IERC20;
  using UserConfiguration for DataTypes.UserConfigurationMap;
  using WadRayMath for uint256;
  using PercentageMath for uint256;

  // See `IPool` for descriptions
  event UserEModeSet(address indexed user, uint8 categoryId);

  /**
   * @notice Updates the user efficiency mode category
   * @dev Will revert if user is borrowing non-compatible asset or change will drop HF < HEALTH_FACTOR_LIQUIDATION_THRESHOLD
   * @dev Emits the `UserEModeSet` event
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @param eModeCategories The configuration of all the efficiency mode categories
   * @param usersEModeCategory The state of all users efficiency mode category
   * @param userConfig The user configuration mapping that tracks the supplied/borrowed assets
   * @param params The additional parameters needed to execute the setUserEMode function
   */
  function executeSetUserEMode(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList,
    mapping(uint8 => DataTypes.EModeCategory) storage eModeCategories,
    mapping(address => uint8) storage usersEModeCategory,
    DataTypes.UserConfigurationMap storage userConfig,
    DataTypes.ExecuteSetUserEModeParams memory params
  ) external {
    if (usersEModeCategory[msg.sender] == params.categoryId) return;

    ValidationLogic.validateSetUserEMode(
      eModeCategories,
      userConfig,
      params.reservesCount,
      params.categoryId
    );

    usersEModeCategory[msg.sender] = params.categoryId;

    ValidationLogic.validateHealthFactor(
      reservesData,
      reservesList,
      eModeCategories,
      userConfig,
      msg.sender,
      params.categoryId,
      params.reservesCount,
      params.oracle
    );
    emit UserEModeSet(msg.sender, params.categoryId);
  }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.10;

import {IERC20} from '../../../dependencies/openzeppelin/contracts/IERC20.sol';
import {IScaledBalanceToken} from '../../../interfaces/IScaledBalanceToken.sol';
import {IPriceOracleGetter} from '../../../interfaces/IPriceOracleGetter.sol';
import {ReserveConfiguration} from '../configuration/ReserveConfiguration.sol';
import {UserConfiguration} from '../configuration/UserConfiguration.sol';
import {EModeConfiguration} from '../configuration/EModeConfiguration.sol';
import {PercentageMath} from '../math/PercentageMath.sol';
import {WadRayMath} from '../math/WadRayMath.sol';
import {DataTypes} from '../types/DataTypes.sol';
import {ReserveLogic} from './ReserveLogic.sol';
import {EModeLogic} from './EModeLogic.sol';

/**
 * @title GenericLogic library
 * @author Aave
 * @notice Implements protocol-level logic to calculate and validate the state of a user
 */
library GenericLogic {
  using ReserveLogic for DataTypes.ReserveData;
  using WadRayMath for uint256;
  using PercentageMath for uint256;
  using ReserveConfiguration for DataTypes.ReserveConfigurationMap;
  using UserConfiguration for DataTypes.UserConfigurationMap;

  struct CalculateUserAccountDataVars {
    uint256 assetPrice;
    uint256 assetUnit;
    uint256 userBalanceInBaseCurrency;
    uint256 decimals;
    uint256 ltv;
    uint256 liquidationThreshold;
    uint256 i;
    uint256 healthFactor;
    uint256 totalCollateralInBaseCurrency;
    uint256 totalDebtInBaseCurrency;
    uint256 avgLtv;
    uint256 avgLiquidationThreshold;
    uint256 eModeLtv;
    uint256 eModeLiqThreshold;
    address currentReserveAddress;
    bool hasZeroLtvCollateral;
    bool isInEModeCategory;
  }

  /**
   * @notice Calculates the user data across the reserves.
   * @dev It includes the total liquidity/collateral/borrow balances in the base currency used by the price feed,
   * the average Loan To Value, the average Liquidation Ratio, and the Health factor.
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @param eModeCategories The configuration of all the efficiency mode categories
   * @param params Additional parameters needed for the calculation
   * @return The total collateral of the user in the base currency used by the price feed
   * @return The total debt of the user in the base currency used by the price feed
   * @return The average ltv of the user
   * @return The average liquidation threshold of the user
   * @return The health factor of the user
   * @return True if the ltv is zero, false otherwise
   */
  function calculateUserAccountData(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList,
    mapping(uint8 => DataTypes.EModeCategory) storage eModeCategories,
    DataTypes.CalculateUserAccountDataParams memory params
  ) internal view returns (uint256, uint256, uint256, uint256, uint256, bool) {
    if (params.userConfig.isEmpty()) {
      return (0, 0, 0, 0, type(uint256).max, false);
    }

    CalculateUserAccountDataVars memory vars;

    if (params.userEModeCategory != 0) {
      vars.eModeLtv = eModeCategories[params.userEModeCategory].ltv;
      vars.eModeLiqThreshold = eModeCategories[params.userEModeCategory].liquidationThreshold;
    }

    while (vars.i < params.reservesCount) {
      if (!params.userConfig.isUsingAsCollateralOrBorrowing(vars.i)) {
        unchecked {
          ++vars.i;
        }
        continue;
      }

      vars.currentReserveAddress = reservesList[vars.i];

      if (vars.currentReserveAddress == address(0)) {
        unchecked {
          ++vars.i;
        }
        continue;
      }

      DataTypes.ReserveData storage currentReserve = reservesData[vars.currentReserveAddress];

      (vars.ltv, vars.liquidationThreshold, , vars.decimals, ) = currentReserve
        .configuration
        .getParams();

      unchecked {
        vars.assetUnit = 10 ** vars.decimals;
      }

      vars.assetPrice = IPriceOracleGetter(params.oracle).getAssetPrice(vars.currentReserveAddress);

      if (vars.liquidationThreshold != 0 && params.userConfig.isUsingAsCollateral(vars.i)) {
        vars.userBalanceInBaseCurrency = _getUserBalanceInBaseCurrency(
          params.user,
          currentReserve,
          vars.assetPrice,
          vars.assetUnit
        );

        vars.totalCollateralInBaseCurrency += vars.userBalanceInBaseCurrency;

        vars.isInEModeCategory =
          params.userEModeCategory != 0 &&
          EModeConfiguration.isReserveEnabledOnBitmap(
            eModeCategories[params.userEModeCategory].collateralBitmap,
            vars.i
          );

        if (vars.ltv != 0) {
          vars.avgLtv +=
            vars.userBalanceInBaseCurrency *
            (vars.isInEModeCategory ? vars.eModeLtv : vars.ltv);
        } else {
          vars.hasZeroLtvCollateral = true;
        }

        vars.avgLiquidationThreshold +=
          vars.userBalanceInBaseCurrency *
          (vars.isInEModeCategory ? vars.eModeLiqThreshold : vars.liquidationThreshold);
      }

      if (params.userConfig.isBorrowing(vars.i)) {
        if (currentReserve.configuration.getIsVirtualAccActive()) {
          vars.totalDebtInBaseCurrency += _getUserDebtInBaseCurrency(
            params.user,
            currentReserve,
            vars.assetPrice,
            vars.assetUnit
          );
        } else {
          // custom case for GHO, which applies the GHO discount on balanceOf
          vars.totalDebtInBaseCurrency +=
            (IERC20(currentReserve.variableDebtTokenAddress).balanceOf(params.user) *
              vars.assetPrice) /
            vars.assetUnit;
        }
      }

      unchecked {
        ++vars.i;
      }
    }

    unchecked {
      vars.avgLtv = vars.totalCollateralInBaseCurrency != 0
        ? vars.avgLtv / vars.totalCollateralInBaseCurrency
        : 0;
      vars.avgLiquidationThreshold = vars.totalCollateralInBaseCurrency != 0
        ? vars.avgLiquidationThreshold / vars.totalCollateralInBaseCurrency
        : 0;
    }

    vars.healthFactor = (vars.totalDebtInBaseCurrency == 0)
      ? type(uint256).max
      : (vars.totalCollateralInBaseCurrency.percentMul(vars.avgLiquidationThreshold)).wadDiv(
        vars.totalDebtInBaseCurrency
      );
    return (
      vars.totalCollateralInBaseCurrency,
      vars.totalDebtInBaseCurrency,
      vars.avgLtv,
      vars.avgLiquidationThreshold,
      vars.healthFactor,
      vars.hasZeroLtvCollateral
    );
  }

  /**
   * @notice Calculates the maximum amount that can be borrowed depending on the available collateral, the total debt
   * and the average Loan To Value
   * @param totalCollateralInBaseCurrency The total collateral in the base currency used by the price feed
   * @param totalDebtInBaseCurrency The total borrow balance in the base currency used by the price feed
   * @param ltv The average loan to value
   * @return The amount available to borrow in the base currency of the used by the price feed
   */
  function calculateAvailableBorrows(
    uint256 totalCollateralInBaseCurrency,
    uint256 totalDebtInBaseCurrency,
    uint256 ltv
  ) internal pure returns (uint256) {
    uint256 availableBorrowsInBaseCurrency = totalCollateralInBaseCurrency.percentMul(ltv);

    if (availableBorrowsInBaseCurrency <= totalDebtInBaseCurrency) {
      return 0;
    }

    availableBorrowsInBaseCurrency = availableBorrowsInBaseCurrency - totalDebtInBaseCurrency;
    return availableBorrowsInBaseCurrency;
  }

  /**
   * @notice Calculates total debt of the user in the based currency used to normalize the values of the assets
   * @dev This fetches the `balanceOf` of the variable debt token for the user. For gas reasons, the
   * variable debt balance is calculated by fetching `scaledBalancesOf` normalized debt, which is cheaper than
   * fetching `balanceOf`
   * @param user The address of the user
   * @param reserve The data of the reserve for which the total debt of the user is being calculated
   * @param assetPrice The price of the asset for which the total debt of the user is being calculated
   * @param assetUnit The value representing one full unit of the asset (10^decimals)
   * @return The total debt of the user normalized to the base currency
   */
  function _getUserDebtInBaseCurrency(
    address user,
    DataTypes.ReserveData storage reserve,
    uint256 assetPrice,
    uint256 assetUnit
  ) private view returns (uint256) {
    // fetching variable debt
    uint256 userTotalDebt = IScaledBalanceToken(reserve.variableDebtTokenAddress).scaledBalanceOf(
      user
    );
    if (userTotalDebt == 0) {
      return 0;
    }

    userTotalDebt = userTotalDebt.rayMul(reserve.getNormalizedDebt()) * assetPrice;
    unchecked {
      return userTotalDebt / assetUnit;
    }
  }

  /**
   * @notice Calculates total aToken balance of the user in the based currency used by the price oracle
   * @dev For gas reasons, the aToken balance is calculated by fetching `scaledBalancesOf` normalized debt, which
   * is cheaper than fetching `balanceOf`
   * @param user The address of the user
   * @param reserve The data of the reserve for which the total aToken balance of the user is being calculated
   * @param assetPrice The price of the asset for which the total aToken balance of the user is being calculated
   * @param assetUnit The value representing one full unit of the asset (10^decimals)
   * @return The total aToken balance of the user normalized to the base currency of the price oracle
   */
  function _getUserBalanceInBaseCurrency(
    address user,
    DataTypes.ReserveData storage reserve,
    uint256 assetPrice,
    uint256 assetUnit
  ) private view returns (uint256) {
    uint256 normalizedIncome = reserve.getNormalizedIncome();
    uint256 balance = (
      IScaledBalanceToken(reserve.aTokenAddress).scaledBalanceOf(user).rayMul(normalizedIncome)
    ) * assetPrice;

    unchecked {
      return balance / assetUnit;
    }
  }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.10;

import {DataTypes} from '../types/DataTypes.sol';
import {ReserveConfiguration} from '../configuration/ReserveConfiguration.sol';
import {UserConfiguration} from '../configuration/UserConfiguration.sol';
import {SafeCast} from '../../../dependencies/openzeppelin/contracts/SafeCast.sol';

/**
 * @title IsolationModeLogic library
 * @author Aave
 * @notice Implements the base logic for handling repayments for assets borrowed in isolation mode
 */
library IsolationModeLogic {
  using ReserveConfiguration for DataTypes.ReserveConfigurationMap;
  using UserConfiguration for DataTypes.UserConfigurationMap;
  using SafeCast for uint256;

  // See `IPool` for descriptions
  event IsolationModeTotalDebtUpdated(address indexed asset, uint256 totalDebt);

  /**
   * @notice updated the isolated debt whenever a position collateralized by an isolated asset is repaid
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @param userConfig The user configuration mapping
   * @param reserveCache The cached data of the reserve
   * @param repayAmount The amount being repaid
   */
  function updateIsolatedDebtIfIsolated(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList,
    DataTypes.UserConfigurationMap storage userConfig,
    DataTypes.ReserveCache memory reserveCache,
    uint256 repayAmount
  ) internal {
    (bool isolationModeActive, address isolationModeCollateralAddress, ) = userConfig
      .getIsolationModeState(reservesData, reservesList);

    if (isolationModeActive) {
      updateIsolatedDebt(reservesData, reserveCache, repayAmount, isolationModeCollateralAddress);
    }
  }

  /**
   * @notice updated the isolated debt whenever a position collateralized by an isolated asset is liquidated
   * @param reservesData The state of all the reserves
   * @param reserveCache The cached data of the reserve
   * @param repayAmount The amount being repaid
   * @param isolationModeCollateralAddress The address of the isolated collateral
   */
  function updateIsolatedDebt(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    DataTypes.ReserveCache memory reserveCache,
    uint256 repayAmount,
    address isolationModeCollateralAddress
  ) internal {
    uint128 isolationModeTotalDebt = reservesData[isolationModeCollateralAddress]
      .isolationModeTotalDebt;

    uint128 isolatedDebtRepaid = (repayAmount /
      10 **
        (reserveCache.reserveConfiguration.getDecimals() -
          ReserveConfiguration.DEBT_CEILING_DECIMALS)).toUint128();

    // since the debt ceiling does not take into account the interest accrued, it might happen that amount
    // repaid > debt in isolation mode
    if (isolationModeTotalDebt <= isolatedDebtRepaid) {
      reservesData[isolationModeCollateralAddress].isolationModeTotalDebt = 0;
      emit IsolationModeTotalDebtUpdated(isolationModeCollateralAddress, 0);
    } else {
      uint256 nextIsolationModeTotalDebt = reservesData[isolationModeCollateralAddress]
        .isolationModeTotalDebt = isolationModeTotalDebt - isolatedDebtRepaid;
      emit IsolationModeTotalDebtUpdated(
        isolationModeCollateralAddress,
        nextIsolationModeTotalDebt
      );
    }
  }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.10;

import {IERC20} from '../../../dependencies/openzeppelin/contracts/IERC20.sol';
import {GPv2SafeERC20} from '../../../dependencies/gnosis/contracts/GPv2SafeERC20.sol';
import {IVariableDebtToken} from '../../../interfaces/IVariableDebtToken.sol';
import {IReserveInterestRateStrategy} from '../../../interfaces/IReserveInterestRateStrategy.sol';
import {ReserveConfiguration} from '../configuration/ReserveConfiguration.sol';
import {MathUtils} from '../math/MathUtils.sol';
import {WadRayMath} from '../math/WadRayMath.sol';
import {PercentageMath} from '../math/PercentageMath.sol';
import {Errors} from '../helpers/Errors.sol';
import {DataTypes} from '../types/DataTypes.sol';
import {SafeCast} from '../../../dependencies/openzeppelin/contracts/SafeCast.sol';

/**
 * @title ReserveLogic library
 * @author Aave
 * @notice Implements the logic to update the reserves state
 */
library ReserveLogic {
  using WadRayMath for uint256;
  using PercentageMath for uint256;
  using SafeCast for uint256;
  using GPv2SafeERC20 for IERC20;
  using ReserveLogic for DataTypes.ReserveData;
  using ReserveConfiguration for DataTypes.ReserveConfigurationMap;

  // See `IPool` for descriptions
  event ReserveDataUpdated(
    address indexed reserve,
    uint256 liquidityRate,
    uint256 stableBorrowRate,
    uint256 variableBorrowRate,
    uint256 liquidityIndex,
    uint256 variableBorrowIndex
  );

  /**
   * @notice Returns the ongoing normalized income for the reserve.
   * @dev A value of 1e27 means there is no income. As time passes, the income is accrued
   * @dev A value of 2*1e27 means for each unit of asset one unit of income has been accrued
   * @param reserve The reserve object
   * @return The normalized income, expressed in ray
   */
  function getNormalizedIncome(
    DataTypes.ReserveData storage reserve
  ) internal view returns (uint256) {
    uint40 timestamp = reserve.lastUpdateTimestamp;

    //solium-disable-next-line
    if (timestamp == block.timestamp) {
      //if the index was updated in the same block, no need to perform any calculation
      return reserve.liquidityIndex;
    } else {
      return
        MathUtils.calculateLinearInterest(reserve.currentLiquidityRate, timestamp).rayMul(
          reserve.liquidityIndex
        );
    }
  }

  /**
   * @notice Returns the ongoing normalized variable debt for the reserve.
   * @dev A value of 1e27 means there is no debt. As time passes, the debt is accrued
   * @dev A value of 2*1e27 means that for each unit of debt, one unit worth of interest has been accumulated
   * @param reserve The reserve object
   * @return The normalized variable debt, expressed in ray
   */
  function getNormalizedDebt(
    DataTypes.ReserveData storage reserve
  ) internal view returns (uint256) {
    uint40 timestamp = reserve.lastUpdateTimestamp;

    //solium-disable-next-line
    if (timestamp == block.timestamp) {
      //if the index was updated in the same block, no need to perform any calculation
      return reserve.variableBorrowIndex;
    } else {
      return
        MathUtils.calculateCompoundedInterest(reserve.currentVariableBorrowRate, timestamp).rayMul(
          reserve.variableBorrowIndex
        );
    }
  }

  /**
   * @notice Updates the liquidity cumulative index and the variable borrow index.
   * @param reserve The reserve object
   * @param reserveCache The caching layer for the reserve data
   */
  function updateState(
    DataTypes.ReserveData storage reserve,
    DataTypes.ReserveCache memory reserveCache
  ) internal {
    // If time didn't pass since last stored timestamp, skip state update
    //solium-disable-next-line
    if (reserveCache.reserveLastUpdateTimestamp == uint40(block.timestamp)) {
      return;
    }

    _updateIndexes(reserve, reserveCache);
    _accrueToTreasury(reserve, reserveCache);

    //solium-disable-next-line
    reserve.lastUpdateTimestamp = uint40(block.timestamp);
    reserveCache.reserveLastUpdateTimestamp = uint40(block.timestamp);
  }

  /**
   * @notice Accumulates a predefined amount of asset to the reserve as a fixed, instantaneous income. Used for example
   * to accumulate the flashloan fee to the reserve, and spread it between all the suppliers.
   * @param reserve The reserve object
   * @param totalLiquidity The total liquidity available in the reserve
   * @param amount The amount to accumulate
   * @return The next liquidity index of the reserve
   */
  function cumulateToLiquidityIndex(
    DataTypes.ReserveData storage reserve,
    uint256 totalLiquidity,
    uint256 amount
  ) internal returns (uint256) {
    //next liquidity index is calculated this way: `((amount / totalLiquidity) + 1) * liquidityIndex`
    //division `amount / totalLiquidity` done in ray for precision
    uint256 result = (amount.wadToRay().rayDiv(totalLiquidity.wadToRay()) + WadRayMath.RAY).rayMul(
      reserve.liquidityIndex
    );
    reserve.liquidityIndex = result.toUint128();
    return result;
  }

  /**
   * @notice Initializes a reserve.
   * @param reserve The reserve object
   * @param aTokenAddress The address of the overlying atoken contract
   * @param variableDebtTokenAddress The address of the overlying variable debt token contract
   * @param interestRateStrategyAddress The address of the interest rate strategy contract
   */
  function init(
    DataTypes.ReserveData storage reserve,
    address aTokenAddress,
    address variableDebtTokenAddress,
    address interestRateStrategyAddress
  ) internal {
    require(reserve.aTokenAddress == address(0), Errors.RESERVE_ALREADY_INITIALIZED);

    reserve.liquidityIndex = uint128(WadRayMath.RAY);
    reserve.variableBorrowIndex = uint128(WadRayMath.RAY);
    reserve.aTokenAddress = aTokenAddress;
    reserve.variableDebtTokenAddress = variableDebtTokenAddress;
    reserve.interestRateStrategyAddress = interestRateStrategyAddress;
  }

  /**
   * @notice Updates the reserve current variable borrow rate and the current liquidity rate.
   * @param reserve The reserve reserve to be updated
   * @param reserveCache The caching layer for the reserve data
   * @param reserveAddress The address of the reserve to be updated
   * @param liquidityAdded The amount of liquidity added to the protocol (supply or repay) in the previous action
   * @param liquidityTaken The amount of liquidity taken from the protocol (redeem or borrow)
   */
  function updateInterestRatesAndVirtualBalance(
    DataTypes.ReserveData storage reserve,
    DataTypes.ReserveCache memory reserveCache,
    address reserveAddress,
    uint256 liquidityAdded,
    uint256 liquidityTaken
  ) internal {
    uint256 totalVariableDebt = reserveCache.nextScaledVariableDebt.rayMul(
      reserveCache.nextVariableBorrowIndex
    );

    (uint256 nextLiquidityRate, uint256 nextVariableRate) = IReserveInterestRateStrategy(
      reserve.interestRateStrategyAddress
    ).calculateInterestRates(
        DataTypes.CalculateInterestRatesParams({
          unbacked: reserve.unbacked + reserve.deficit,
          liquidityAdded: liquidityAdded,
          liquidityTaken: liquidityTaken,
          totalDebt: totalVariableDebt,
          reserveFactor: reserveCache.reserveFactor,
          reserve: reserveAddress,
          usingVirtualBalance: reserveCache.reserveConfiguration.getIsVirtualAccActive(),
          virtualUnderlyingBalance: reserve.virtualUnderlyingBalance
        })
      );

    reserve.currentLiquidityRate = nextLiquidityRate.toUint128();
    reserve.currentVariableBorrowRate = nextVariableRate.toUint128();

    // Only affect virtual balance if the reserve uses it
    if (reserveCache.reserveConfiguration.getIsVirtualAccActive()) {
      if (liquidityAdded > 0) {
        reserve.virtualUnderlyingBalance += liquidityAdded.toUint128();
      }
      if (liquidityTaken > 0) {
        reserve.virtualUnderlyingBalance -= liquidityTaken.toUint128();
      }
    }

    emit ReserveDataUpdated(
      reserveAddress,
      nextLiquidityRate,
      0,
      nextVariableRate,
      reserveCache.nextLiquidityIndex,
      reserveCache.nextVariableBorrowIndex
    );
  }

  /**
   * @notice Mints part of the repaid interest to the reserve treasury as a function of the reserve factor for the
   * specific asset.
   * @param reserve The reserve to be updated
   * @param reserveCache The caching layer for the reserve data
   */
  function _accrueToTreasury(
    DataTypes.ReserveData storage reserve,
    DataTypes.ReserveCache memory reserveCache
  ) internal {
    if (reserveCache.reserveFactor == 0) {
      return;
    }

    //calculate the total variable debt at moment of the last interaction
    uint256 prevTotalVariableDebt = reserveCache.currScaledVariableDebt.rayMul(
      reserveCache.currVariableBorrowIndex
    );

    //calculate the new total variable debt after accumulation of the interest on the index
    uint256 currTotalVariableDebt = reserveCache.currScaledVariableDebt.rayMul(
      reserveCache.nextVariableBorrowIndex
    );

    //debt accrued is the sum of the current debt minus the sum of the debt at the last update
    uint256 totalDebtAccrued = currTotalVariableDebt - prevTotalVariableDebt;

    uint256 amountToMint = totalDebtAccrued.percentMul(reserveCache.reserveFactor);

    if (amountToMint != 0) {
      reserve.accruedToTreasury += amountToMint.rayDiv(reserveCache.nextLiquidityIndex).toUint128();
    }
  }

  /**
   * @notice Updates the reserve indexes and the timestamp of the update.
   * @param reserve The reserve reserve to be updated
   * @param reserveCache The cache layer holding the cached protocol data
   */
  function _updateIndexes(
    DataTypes.ReserveData storage reserve,
    DataTypes.ReserveCache memory reserveCache
  ) internal {
    // Only cumulating on the supply side if there is any income being produced
    // The case of Reserve Factor 100% is not a problem (currentLiquidityRate == 0),
    // as liquidity index should not be updated
    if (reserveCache.currLiquidityRate != 0) {
      uint256 cumulatedLiquidityInterest = MathUtils.calculateLinearInterest(
        reserveCache.currLiquidityRate,
        reserveCache.reserveLastUpdateTimestamp
      );
      reserveCache.nextLiquidityIndex = cumulatedLiquidityInterest.rayMul(
        reserveCache.currLiquidityIndex
      );
      reserve.liquidityIndex = reserveCache.nextLiquidityIndex.toUint128();
    }

    // Variable borrow index only gets updated if there is any variable debt.
    // reserveCache.currVariableBorrowRate != 0 is not a correct validation,
    // because a positive base variable rate can be stored on
    // reserveCache.currVariableBorrowRate, but the index should not increase
    if (reserveCache.currScaledVariableDebt != 0) {
      uint256 cumulatedVariableBorrowInterest = MathUtils.calculateCompoundedInterest(
        reserveCache.currVariableBorrowRate,
        reserveCache.reserveLastUpdateTimestamp
      );
      reserveCache.nextVariableBorrowIndex = cumulatedVariableBorrowInterest.rayMul(
        reserveCache.currVariableBorrowIndex
      );
      reserve.variableBorrowIndex = reserveCache.nextVariableBorrowIndex.toUint128();
    }
  }

  /**
   * @notice Creates a cache object to avoid repeated storage reads and external contract calls when updating state and
   * interest rates.
   * @param reserve The reserve object for which the cache will be filled
   * @return The cache object
   */
  function cache(
    DataTypes.ReserveData storage reserve
  ) internal view returns (DataTypes.ReserveCache memory) {
    DataTypes.ReserveCache memory reserveCache;

    reserveCache.reserveConfiguration = reserve.configuration;
    reserveCache.reserveFactor = reserveCache.reserveConfiguration.getReserveFactor();
    reserveCache.currLiquidityIndex = reserveCache.nextLiquidityIndex = reserve.liquidityIndex;
    reserveCache.currVariableBorrowIndex = reserveCache.nextVariableBorrowIndex = reserve
      .variableBorrowIndex;
    reserveCache.currLiquidityRate = reserve.currentLiquidityRate;
    reserveCache.currVariableBorrowRate = reserve.currentVariableBorrowRate;

    reserveCache.aTokenAddress = reserve.aTokenAddress;
    reserveCache.variableDebtTokenAddress = reserve.variableDebtTokenAddress;

    reserveCache.reserveLastUpdateTimestamp = reserve.lastUpdateTimestamp;

    reserveCache.currScaledVariableDebt = reserveCache.nextScaledVariableDebt = IVariableDebtToken(
      reserveCache.variableDebtTokenAddress
    ).scaledTotalSupply();

    return reserveCache;
  }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.10;

import {IERC20} from '../../../dependencies/openzeppelin/contracts/IERC20.sol';
import {Address} from '../../../dependencies/openzeppelin/contracts/Address.sol';
import {GPv2SafeERC20} from '../../../dependencies/gnosis/contracts/GPv2SafeERC20.sol';
import {IPriceOracleGetter} from '../../../interfaces/IPriceOracleGetter.sol';
import {IAToken} from '../../../interfaces/IAToken.sol';
import {IPriceOracleSentinel} from '../../../interfaces/IPriceOracleSentinel.sol';
import {IPoolAddressesProvider} from '../../../interfaces/IPoolAddressesProvider.sol';
import {IAccessControl} from '../../../dependencies/openzeppelin/contracts/IAccessControl.sol';
import {ReserveConfiguration} from '../configuration/ReserveConfiguration.sol';
import {UserConfiguration} from '../configuration/UserConfiguration.sol';
import {EModeConfiguration} from '../configuration/EModeConfiguration.sol';
import {Errors} from '../helpers/Errors.sol';
import {WadRayMath} from '../math/WadRayMath.sol';
import {PercentageMath} from '../math/PercentageMath.sol';
import {DataTypes} from '../types/DataTypes.sol';
import {ReserveLogic} from './ReserveLogic.sol';
import {GenericLogic} from './GenericLogic.sol';
import {SafeCast} from '../../../dependencies/openzeppelin/contracts/SafeCast.sol';
import {IncentivizedERC20} from '../../tokenization/base/IncentivizedERC20.sol';

/**
 * @title ValidationLogic library
 * @author Aave
 * @notice Implements functions to validate the different actions of the protocol
 */
library ValidationLogic {
  using ReserveLogic for DataTypes.ReserveData;
  using WadRayMath for uint256;
  using PercentageMath for uint256;
  using SafeCast for uint256;
  using GPv2SafeERC20 for IERC20;
  using ReserveConfiguration for DataTypes.ReserveConfigurationMap;
  using UserConfiguration for DataTypes.UserConfigurationMap;
  using Address for address;

  // Factor to apply to "only-variable-debt" liquidity rate to get threshold for rebalancing, expressed in bps
  // A value of 0.9e4 results in 90%
  uint256 public constant REBALANCE_UP_LIQUIDITY_RATE_THRESHOLD = 0.9e4;

  // Minimum health factor allowed under any circumstance
  // A value of 0.95e18 results in 0.95
  uint256 public constant MINIMUM_HEALTH_FACTOR_LIQUIDATION_THRESHOLD = 0.95e18;

  /**
   * @dev Minimum health factor to consider a user position healthy
   * A value of 1e18 results in 1
   */
  uint256 public constant HEALTH_FACTOR_LIQUIDATION_THRESHOLD = 1e18;

  /**
   * @dev Role identifier for the role allowed to supply isolated reserves as collateral
   */
  bytes32 public constant ISOLATED_COLLATERAL_SUPPLIER_ROLE =
    keccak256('ISOLATED_COLLATERAL_SUPPLIER');

  /**
   * @notice Validates a supply action.
   * @param reserveCache The cached data of the reserve
   * @param amount The amount to be supplied
   */
  function validateSupply(
    DataTypes.ReserveCache memory reserveCache,
    DataTypes.ReserveData storage reserve,
    uint256 amount,
    address onBehalfOf
  ) internal view {
    require(amount != 0, Errors.INVALID_AMOUNT);

    (bool isActive, bool isFrozen, , bool isPaused) = reserveCache.reserveConfiguration.getFlags();
    require(isActive, Errors.RESERVE_INACTIVE);
    require(!isPaused, Errors.RESERVE_PAUSED);
    require(!isFrozen, Errors.RESERVE_FROZEN);
    require(onBehalfOf != reserveCache.aTokenAddress, Errors.SUPPLY_TO_ATOKEN);

    uint256 supplyCap = reserveCache.reserveConfiguration.getSupplyCap();
    require(
      supplyCap == 0 ||
        ((IAToken(reserveCache.aTokenAddress).scaledTotalSupply() +
          uint256(reserve.accruedToTreasury)).rayMul(reserveCache.nextLiquidityIndex) + amount) <=
        supplyCap * (10 ** reserveCache.reserveConfiguration.getDecimals()),
      Errors.SUPPLY_CAP_EXCEEDED
    );
  }

  /**
   * @notice Validates a withdraw action.
   * @param reserveCache The cached data of the reserve
   * @param amount The amount to be withdrawn
   * @param userBalance The balance of the user
   */
  function validateWithdraw(
    DataTypes.ReserveCache memory reserveCache,
    uint256 amount,
    uint256 userBalance
  ) internal pure {
    require(amount != 0, Errors.INVALID_AMOUNT);
    require(amount <= userBalance, Errors.NOT_ENOUGH_AVAILABLE_USER_BALANCE);

    (bool isActive, , , bool isPaused) = reserveCache.reserveConfiguration.getFlags();
    require(isActive, Errors.RESERVE_INACTIVE);
    require(!isPaused, Errors.RESERVE_PAUSED);
  }

  struct ValidateBorrowLocalVars {
    uint256 currentLtv;
    uint256 collateralNeededInBaseCurrency;
    uint256 userCollateralInBaseCurrency;
    uint256 userDebtInBaseCurrency;
    uint256 availableLiquidity;
    uint256 healthFactor;
    uint256 totalDebt;
    uint256 totalSupplyVariableDebt;
    uint256 reserveDecimals;
    uint256 borrowCap;
    uint256 amountInBaseCurrency;
    uint256 assetUnit;
    address siloedBorrowingAddress;
    bool isActive;
    bool isFrozen;
    bool isPaused;
    bool borrowingEnabled;
    bool siloedBorrowingEnabled;
  }

  /**
   * @notice Validates a borrow action.
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @param eModeCategories The configuration of all the efficiency mode categories
   * @param params Additional params needed for the validation
   */
  function validateBorrow(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList,
    mapping(uint8 => DataTypes.EModeCategory) storage eModeCategories,
    DataTypes.ValidateBorrowParams memory params
  ) internal view {
    require(params.amount != 0, Errors.INVALID_AMOUNT);

    ValidateBorrowLocalVars memory vars;

    (vars.isActive, vars.isFrozen, vars.borrowingEnabled, vars.isPaused) = params
      .reserveCache
      .reserveConfiguration
      .getFlags();

    require(vars.isActive, Errors.RESERVE_INACTIVE);
    require(!vars.isPaused, Errors.RESERVE_PAUSED);
    require(!vars.isFrozen, Errors.RESERVE_FROZEN);
    require(vars.borrowingEnabled, Errors.BORROWING_NOT_ENABLED);
    require(
      !params.reserveCache.reserveConfiguration.getIsVirtualAccActive() ||
        IERC20(params.reserveCache.aTokenAddress).totalSupply() >= params.amount,
      Errors.INVALID_AMOUNT
    );

    require(
      params.priceOracleSentinel == address(0) ||
        IPriceOracleSentinel(params.priceOracleSentinel).isBorrowAllowed(),
      Errors.PRICE_ORACLE_SENTINEL_CHECK_FAILED
    );

    //validate interest rate mode
    require(
      params.interestRateMode == DataTypes.InterestRateMode.VARIABLE,
      Errors.INVALID_INTEREST_RATE_MODE_SELECTED
    );

    vars.reserveDecimals = params.reserveCache.reserveConfiguration.getDecimals();
    vars.borrowCap = params.reserveCache.reserveConfiguration.getBorrowCap();
    unchecked {
      vars.assetUnit = 10 ** vars.reserveDecimals;
    }

    if (vars.borrowCap != 0) {
      vars.totalSupplyVariableDebt = params.reserveCache.currScaledVariableDebt.rayMul(
        params.reserveCache.nextVariableBorrowIndex
      );

      vars.totalDebt = vars.totalSupplyVariableDebt + params.amount;

      unchecked {
        require(vars.totalDebt <= vars.borrowCap * vars.assetUnit, Errors.BORROW_CAP_EXCEEDED);
      }
    }

    if (params.isolationModeActive) {
      // check that the asset being borrowed is borrowable in isolation mode AND
      // the total exposure is no bigger than the collateral debt ceiling
      require(
        params.reserveCache.reserveConfiguration.getBorrowableInIsolation(),
        Errors.ASSET_NOT_BORROWABLE_IN_ISOLATION
      );

      require(
        reservesData[params.isolationModeCollateralAddress].isolationModeTotalDebt +
          (params.amount /
            10 ** (vars.reserveDecimals - ReserveConfiguration.DEBT_CEILING_DECIMALS))
            .toUint128() <=
          params.isolationModeDebtCeiling,
        Errors.DEBT_CEILING_EXCEEDED
      );
    }

    if (params.userEModeCategory != 0) {
      require(
        EModeConfiguration.isReserveEnabledOnBitmap(
          eModeCategories[params.userEModeCategory].borrowableBitmap,
          reservesData[params.asset].id
        ),
        Errors.NOT_BORROWABLE_IN_EMODE
      );
    }

    (
      vars.userCollateralInBaseCurrency,
      vars.userDebtInBaseCurrency,
      vars.currentLtv,
      ,
      vars.healthFactor,

    ) = GenericLogic.calculateUserAccountData(
      reservesData,
      reservesList,
      eModeCategories,
      DataTypes.CalculateUserAccountDataParams({
        userConfig: params.userConfig,
        reservesCount: params.reservesCount,
        user: params.userAddress,
        oracle: params.oracle,
        userEModeCategory: params.userEModeCategory
      })
    );

    require(vars.userCollateralInBaseCurrency != 0, Errors.COLLATERAL_BALANCE_IS_ZERO);
    require(vars.currentLtv != 0, Errors.LTV_VALIDATION_FAILED);

    require(
      vars.healthFactor > HEALTH_FACTOR_LIQUIDATION_THRESHOLD,
      Errors.HEALTH_FACTOR_LOWER_THAN_LIQUIDATION_THRESHOLD
    );

    vars.amountInBaseCurrency =
      IPriceOracleGetter(params.oracle).getAssetPrice(params.asset) *
      params.amount;
    unchecked {
      vars.amountInBaseCurrency /= vars.assetUnit;
    }

    //add the current already borrowed amount to the amount requested to calculate the total collateral needed.
    vars.collateralNeededInBaseCurrency = (vars.userDebtInBaseCurrency + vars.amountInBaseCurrency)
      .percentDiv(vars.currentLtv); //LTV is calculated in percentage

    require(
      vars.collateralNeededInBaseCurrency <= vars.userCollateralInBaseCurrency,
      Errors.COLLATERAL_CANNOT_COVER_NEW_BORROW
    );

    if (params.userConfig.isBorrowingAny()) {
      (vars.siloedBorrowingEnabled, vars.siloedBorrowingAddress) = params
        .userConfig
        .getSiloedBorrowingState(reservesData, reservesList);

      if (vars.siloedBorrowingEnabled) {
        require(vars.siloedBorrowingAddress == params.asset, Errors.SILOED_BORROWING_VIOLATION);
      } else {
        require(
          !params.reserveCache.reserveConfiguration.getSiloedBorrowing(),
          Errors.SILOED_BORROWING_VIOLATION
        );
      }
    }
  }

  /**
   * @notice Validates a repay action.
   * @param reserveCache The cached data of the reserve
   * @param amountSent The amount sent for the repayment. Can be an actual value or uint(-1)
   * @param onBehalfOf The address of the user msg.sender is repaying for
   * @param debt The borrow balance of the user
   */
  function validateRepay(
    DataTypes.ReserveCache memory reserveCache,
    uint256 amountSent,
    DataTypes.InterestRateMode interestRateMode,
    address onBehalfOf,
    uint256 debt
  ) internal view {
    require(amountSent != 0, Errors.INVALID_AMOUNT);
    require(
      interestRateMode == DataTypes.InterestRateMode.VARIABLE,
      Errors.INVALID_INTEREST_RATE_MODE_SELECTED
    );
    require(
      amountSent != type(uint256).max || msg.sender == onBehalfOf,
      Errors.NO_EXPLICIT_AMOUNT_TO_REPAY_ON_BEHALF
    );

    (bool isActive, , , bool isPaused) = reserveCache.reserveConfiguration.getFlags();
    require(isActive, Errors.RESERVE_INACTIVE);
    require(!isPaused, Errors.RESERVE_PAUSED);

    require(debt != 0, Errors.NO_DEBT_OF_SELECTED_TYPE);
  }

  /**
   * @notice Validates the action of setting an asset as collateral.
   * @param reserveCache The cached data of the reserve
   * @param userBalance The balance of the user
   */
  function validateSetUseReserveAsCollateral(
    DataTypes.ReserveCache memory reserveCache,
    uint256 userBalance
  ) internal pure {
    require(userBalance != 0, Errors.UNDERLYING_BALANCE_ZERO);

    (bool isActive, , , bool isPaused) = reserveCache.reserveConfiguration.getFlags();
    require(isActive, Errors.RESERVE_INACTIVE);
    require(!isPaused, Errors.RESERVE_PAUSED);
  }

  /**
   * @notice Validates a flashloan action.
   * @param reservesData The state of all the reserves
   * @param assets The assets being flash-borrowed
   * @param amounts The amounts for each asset being borrowed
   */
  function validateFlashloan(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    address[] memory assets,
    uint256[] memory amounts
  ) internal view {
    require(assets.length == amounts.length, Errors.INCONSISTENT_FLASHLOAN_PARAMS);
    for (uint256 i = 0; i < assets.length; i++) {
      for (uint256 j = i + 1; j < assets.length; j++) {
        require(assets[i] != assets[j], Errors.INCONSISTENT_FLASHLOAN_PARAMS);
      }
      validateFlashloanSimple(reservesData[assets[i]], amounts[i]);
    }
  }

  /**
   * @notice Validates a flashloan action.
   * @param reserve The state of the reserve
   */
  function validateFlashloanSimple(
    DataTypes.ReserveData storage reserve,
    uint256 amount
  ) internal view {
    DataTypes.ReserveConfigurationMap memory configuration = reserve.configuration;
    require(!configuration.getPaused(), Errors.RESERVE_PAUSED);
    require(configuration.getActive(), Errors.RESERVE_INACTIVE);
    require(configuration.getFlashLoanEnabled(), Errors.FLASHLOAN_DISABLED);
    require(
      !configuration.getIsVirtualAccActive() ||
        IERC20(reserve.aTokenAddress).totalSupply() >= amount,
      Errors.INVALID_AMOUNT
    );
  }

  struct ValidateLiquidationCallLocalVars {
    bool collateralReserveActive;
    bool collateralReservePaused;
    bool principalReserveActive;
    bool principalReservePaused;
    bool isCollateralEnabled;
  }

  /**
   * @notice Validates the liquidation action.
   * @param userConfig The user configuration mapping
   * @param collateralReserve The reserve data of the collateral
   * @param debtReserve The reserve data of the debt
   * @param params Additional parameters needed for the validation
   */
  function validateLiquidationCall(
    DataTypes.UserConfigurationMap storage userConfig,
    DataTypes.ReserveData storage collateralReserve,
    DataTypes.ReserveData storage debtReserve,
    DataTypes.ValidateLiquidationCallParams memory params
  ) internal view {
    ValidateLiquidationCallLocalVars memory vars;

    (vars.collateralReserveActive, , , vars.collateralReservePaused) = collateralReserve
      .configuration
      .getFlags();

    (vars.principalReserveActive, , , vars.principalReservePaused) = params
      .debtReserveCache
      .reserveConfiguration
      .getFlags();

    require(vars.collateralReserveActive && vars.principalReserveActive, Errors.RESERVE_INACTIVE);
    require(!vars.collateralReservePaused && !vars.principalReservePaused, Errors.RESERVE_PAUSED);

    require(
      params.priceOracleSentinel == address(0) ||
        params.healthFactor < MINIMUM_HEALTH_FACTOR_LIQUIDATION_THRESHOLD ||
        IPriceOracleSentinel(params.priceOracleSentinel).isLiquidationAllowed(),
      Errors.PRICE_ORACLE_SENTINEL_CHECK_FAILED
    );

    require(
      collateralReserve.liquidationGracePeriodUntil < uint40(block.timestamp) &&
        debtReserve.liquidationGracePeriodUntil < uint40(block.timestamp),
      Errors.LIQUIDATION_GRACE_SENTINEL_CHECK_FAILED
    );

    require(
      params.healthFactor < HEALTH_FACTOR_LIQUIDATION_THRESHOLD,
      Errors.HEALTH_FACTOR_NOT_BELOW_THRESHOLD
    );

    vars.isCollateralEnabled =
      collateralReserve.configuration.getLiquidationThreshold() != 0 &&
      userConfig.isUsingAsCollateral(collateralReserve.id);

    //if collateral isn't enabled as collateral by user, it cannot be liquidated
    require(vars.isCollateralEnabled, Errors.COLLATERAL_CANNOT_BE_LIQUIDATED);
    require(params.totalDebt != 0, Errors.SPECIFIED_CURRENCY_NOT_BORROWED_BY_USER);
  }

  /**
   * @notice Validates the health factor of a user.
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @param eModeCategories The configuration of all the efficiency mode categories
   * @param userConfig The state of the user for the specific reserve
   * @param user The user to validate health factor of
   * @param userEModeCategory The users active efficiency mode category
   * @param reservesCount The number of available reserves
   * @param oracle The price oracle
   */
  function validateHealthFactor(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList,
    mapping(uint8 => DataTypes.EModeCategory) storage eModeCategories,
    DataTypes.UserConfigurationMap memory userConfig,
    address user,
    uint8 userEModeCategory,
    uint256 reservesCount,
    address oracle
  ) internal view returns (uint256, bool) {
    (, , , , uint256 healthFactor, bool hasZeroLtvCollateral) = GenericLogic
      .calculateUserAccountData(
        reservesData,
        reservesList,
        eModeCategories,
        DataTypes.CalculateUserAccountDataParams({
          userConfig: userConfig,
          reservesCount: reservesCount,
          user: user,
          oracle: oracle,
          userEModeCategory: userEModeCategory
        })
      );

    require(
      healthFactor >= HEALTH_FACTOR_LIQUIDATION_THRESHOLD,
      Errors.HEALTH_FACTOR_LOWER_THAN_LIQUIDATION_THRESHOLD
    );

    return (healthFactor, hasZeroLtvCollateral);
  }

  /**
   * @notice Validates the health factor of a user and the ltv of the asset being withdrawn.
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @param eModeCategories The configuration of all the efficiency mode categories
   * @param userConfig The state of the user for the specific reserve
   * @param asset The asset for which the ltv will be validated
   * @param from The user from which the aTokens are being transferred
   * @param reservesCount The number of available reserves
   * @param oracle The price oracle
   * @param userEModeCategory The users active efficiency mode category
   */
  function validateHFAndLtv(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList,
    mapping(uint8 => DataTypes.EModeCategory) storage eModeCategories,
    DataTypes.UserConfigurationMap memory userConfig,
    address asset,
    address from,
    uint256 reservesCount,
    address oracle,
    uint8 userEModeCategory
  ) internal view {
    DataTypes.ReserveData memory reserve = reservesData[asset];

    (, bool hasZeroLtvCollateral) = validateHealthFactor(
      reservesData,
      reservesList,
      eModeCategories,
      userConfig,
      from,
      userEModeCategory,
      reservesCount,
      oracle
    );

    require(
      !hasZeroLtvCollateral || reserve.configuration.getLtv() == 0,
      Errors.LTV_VALIDATION_FAILED
    );
  }

  /**
   * @notice Validates a transfer action.
   * @param reserve The reserve object
   */
  function validateTransfer(DataTypes.ReserveData storage reserve) internal view {
    require(!reserve.configuration.getPaused(), Errors.RESERVE_PAUSED);
  }

  /**
   * @notice Validates a drop reserve action.
   * @param reservesList The addresses of all the active reserves
   * @param reserve The reserve object
   * @param asset The address of the reserve's underlying asset
   */
  function validateDropReserve(
    mapping(uint256 => address) storage reservesList,
    DataTypes.ReserveData storage reserve,
    address asset
  ) internal view {
    require(asset != address(0), Errors.ZERO_ADDRESS_NOT_VALID);
    require(reserve.id != 0 || reservesList[0] == asset, Errors.ASSET_NOT_LISTED);
    require(
      IERC20(reserve.variableDebtTokenAddress).totalSupply() == 0,
      Errors.VARIABLE_DEBT_SUPPLY_NOT_ZERO
    );
    require(
      IERC20(reserve.aTokenAddress).totalSupply() == 0 && reserve.accruedToTreasury == 0,
      Errors.UNDERLYING_CLAIMABLE_RIGHTS_NOT_ZERO
    );
  }

  /**
   * @notice Validates the action of setting efficiency mode.
   * @param eModeCategories a mapping storing configurations for all efficiency mode categories
   * @param userConfig the user configuration
   * @param reservesCount The total number of valid reserves
   * @param categoryId The id of the category
   */
  function validateSetUserEMode(
    mapping(uint8 => DataTypes.EModeCategory) storage eModeCategories,
    DataTypes.UserConfigurationMap memory userConfig,
    uint256 reservesCount,
    uint8 categoryId
  ) internal view {
    DataTypes.EModeCategory storage eModeCategory = eModeCategories[categoryId];
    // category is invalid if the liq threshold is not set
    require(
      categoryId == 0 || eModeCategory.liquidationThreshold != 0,
      Errors.INCONSISTENT_EMODE_CATEGORY
    );

    // eMode can always be enabled if the user hasn't supplied anything
    if (userConfig.isEmpty()) {
      return;
    }

    // if user is trying to set another category than default we require that
    // either the user is not borrowing, or it's borrowing assets of categoryId
    if (categoryId != 0) {
      unchecked {
        for (uint256 i = 0; i < reservesCount; i++) {
          if (userConfig.isBorrowing(i)) {
            require(
              EModeConfiguration.isReserveEnabledOnBitmap(eModeCategory.borrowableBitmap, i),
              Errors.NOT_BORROWABLE_IN_EMODE
            );
          }
        }
      }
    }
  }

  /**
   * @notice Validates the action of activating the asset as collateral.
   * @dev Only possible if the asset has non-zero LTV and the user is not in isolation mode
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @param userConfig the user configuration
   * @param reserveConfig The reserve configuration
   * @return True if the asset can be activated as collateral, false otherwise
   */
  function validateUseAsCollateral(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList,
    DataTypes.UserConfigurationMap storage userConfig,
    DataTypes.ReserveConfigurationMap memory reserveConfig
  ) internal view returns (bool) {
    if (reserveConfig.getLtv() == 0) {
      return false;
    }
    if (!userConfig.isUsingAsCollateralAny()) {
      return true;
    }
    (bool isolationModeActive, , ) = userConfig.getIsolationModeState(reservesData, reservesList);

    return (!isolationModeActive && reserveConfig.getDebtCeiling() == 0);
  }

  /**
   * @notice Validates if an asset should be automatically activated as collateral in the following actions: supply,
   * transfer, mint unbacked, and liquidate
   * @dev This is used to ensure that isolated assets are not enabled as collateral automatically
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @param userConfig the user configuration
   * @param reserveConfig The reserve configuration
   * @return True if the asset can be activated as collateral, false otherwise
   */
  function validateAutomaticUseAsCollateral(
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList,
    DataTypes.UserConfigurationMap storage userConfig,
    DataTypes.ReserveConfigurationMap memory reserveConfig,
    address aTokenAddress
  ) internal view returns (bool) {
    if (reserveConfig.getDebtCeiling() != 0) {
      // ensures only the ISOLATED_COLLATERAL_SUPPLIER_ROLE can enable collateral as side-effect of an action
      IPoolAddressesProvider addressesProvider = IncentivizedERC20(aTokenAddress)
        .POOL()
        .ADDRESSES_PROVIDER();
      if (
        !IAccessControl(addressesProvider.getACLManager()).hasRole(
          ISOLATED_COLLATERAL_SUPPLIER_ROLE,
          msg.sender
        )
      ) return false;
    }
    return validateUseAsCollateral(reservesData, reservesList, userConfig, reserveConfig);
  }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;

import {WadRayMath} from './WadRayMath.sol';

/**
 * @title MathUtils library
 * @author Aave
 * @notice Provides functions to perform linear and compounded interest calculations
 */
library MathUtils {
  using WadRayMath for uint256;

  /// @dev Ignoring leap years
  uint256 internal constant SECONDS_PER_YEAR = 365 days;

  /**
   * @dev Function to calculate the interest accumulated using a linear interest rate formula
   * @param rate The interest rate, in ray
   * @param lastUpdateTimestamp The timestamp of the last update of the interest
   * @return The interest rate linearly accumulated during the timeDelta, in ray
   */
  function calculateLinearInterest(
    uint256 rate,
    uint40 lastUpdateTimestamp
  ) internal view returns (uint256) {
    //solium-disable-next-line
    uint256 result = rate * (block.timestamp - uint256(lastUpdateTimestamp));
    unchecked {
      result = result / SECONDS_PER_YEAR;
    }

    return WadRayMath.RAY + result;
  }

  /**
   * @dev Function to calculate the interest using a compounded interest rate formula
   * To avoid expensive exponentiation, the calculation is performed using a binomial approximation:
   *
   *  (1+x)^n = 1+n*x+[n/2*(n-1)]*x^2+[n/6*(n-1)*(n-2)*x^3...
   *
   * The approximation slightly underpays liquidity providers and undercharges borrowers, with the advantage of great
   * gas cost reductions. The whitepaper contains reference to the approximation and a table showing the margin of
   * error per different time periods
   *
   * @param rate The interest rate, in ray
   * @param lastUpdateTimestamp The timestamp of the last update of the interest
   * @return The interest rate compounded during the timeDelta, in ray
   */
  function calculateCompoundedInterest(
    uint256 rate,
    uint40 lastUpdateTimestamp,
    uint256 currentTimestamp
  ) internal pure returns (uint256) {
    //solium-disable-next-line
    uint256 exp = currentTimestamp - uint256(lastUpdateTimestamp);

    if (exp == 0) {
      return WadRayMath.RAY;
    }

    uint256 expMinusOne;
    uint256 expMinusTwo;
    uint256 basePowerTwo;
    uint256 basePowerThree;
    unchecked {
      expMinusOne = exp - 1;

      expMinusTwo = exp > 2 ? exp - 2 : 0;

      basePowerTwo = rate.rayMul(rate) / (SECONDS_PER_YEAR * SECONDS_PER_YEAR);
      basePowerThree = basePowerTwo.rayMul(rate) / SECONDS_PER_YEAR;
    }

    uint256 secondTerm = exp * expMinusOne * basePowerTwo;
    unchecked {
      secondTerm /= 2;
    }
    uint256 thirdTerm = exp * expMinusOne * expMinusTwo * basePowerThree;
    unchecked {
      thirdTerm /= 6;
    }

    return WadRayMath.RAY + (rate * exp) / SECONDS_PER_YEAR + secondTerm + thirdTerm;
  }

  /**
   * @dev Calculates the compounded interest between the timestamp of the last update and the current block timestamp
   * @param rate The interest rate (in ray)
   * @param lastUpdateTimestamp The timestamp from which the interest accumulation needs to be calculated
   * @return The interest rate compounded between lastUpdateTimestamp and current block timestamp, in ray
   */
  function calculateCompoundedInterest(
    uint256 rate,
    uint40 lastUpdateTimestamp
  ) internal view returns (uint256) {
    return calculateCompoundedInterest(rate, lastUpdateTimestamp, block.timestamp);
  }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;

/**
 * @title PercentageMath library
 * @author Aave
 * @notice Provides functions to perform percentage calculations
 * @dev Percentages are defined by default with 2 decimals of precision (100.00). The precision is indicated by PERCENTAGE_FACTOR
 * @dev Operations are rounded. If a value is >=.5, will be rounded up, otherwise rounded down.
 */
library PercentageMath {
  // Maximum percentage factor (100.00%)
  uint256 internal constant PERCENTAGE_FACTOR = 1e4;

  // Half percentage factor (50.00%)
  uint256 internal constant HALF_PERCENTAGE_FACTOR = 0.5e4;

  /**
   * @notice Executes a percentage multiplication
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param value The value of which the percentage needs to be calculated
   * @param percentage The percentage of the value to be calculated
   * @return result value percentmul percentage
   */
  function percentMul(uint256 value, uint256 percentage) internal pure returns (uint256 result) {
    // to avoid overflow, value <= (type(uint256).max - HALF_PERCENTAGE_FACTOR) / percentage
    assembly {
      if iszero(
        or(
          iszero(percentage),
          iszero(gt(value, div(sub(not(0), HALF_PERCENTAGE_FACTOR), percentage)))
        )
      ) {
        revert(0, 0)
      }

      result := div(add(mul(value, percentage), HALF_PERCENTAGE_FACTOR), PERCENTAGE_FACTOR)
    }
  }

  /**
   * @notice Executes a percentage division
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param value The value of which the percentage needs to be calculated
   * @param percentage The percentage of the value to be calculated
   * @return result value percentdiv percentage
   */
  function percentDiv(uint256 value, uint256 percentage) internal pure returns (uint256 result) {
    // to avoid overflow, value <= (type(uint256).max - halfPercentage) / PERCENTAGE_FACTOR
    assembly {
      if or(
        iszero(percentage),
        iszero(iszero(gt(value, div(sub(not(0), div(percentage, 2)), PERCENTAGE_FACTOR))))
      ) {
        revert(0, 0)
      }

      result := div(add(mul(value, PERCENTAGE_FACTOR), div(percentage, 2)), percentage)
    }
  }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;

/**
 * @title WadRayMath library
 * @author Aave
 * @notice Provides functions to perform calculations with Wad and Ray units
 * @dev Provides mul and div function for wads (decimal numbers with 18 digits of precision) and rays (decimal numbers
 * with 27 digits of precision)
 * @dev Operations are rounded. If a value is >=.5, will be rounded up, otherwise rounded down.
 */
library WadRayMath {
  // HALF_WAD and HALF_RAY expressed with extended notation as constant with operations are not supported in Yul assembly
  uint256 internal constant WAD = 1e18;
  uint256 internal constant HALF_WAD = 0.5e18;

  uint256 internal constant RAY = 1e27;
  uint256 internal constant HALF_RAY = 0.5e27;

  uint256 internal constant WAD_RAY_RATIO = 1e9;

  /**
   * @dev Multiplies two wad, rounding half up to the nearest wad
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Wad
   * @param b Wad
   * @return c = a*b, in wad
   */
  function wadMul(uint256 a, uint256 b) internal pure returns (uint256 c) {
    // to avoid overflow, a <= (type(uint256).max - HALF_WAD) / b
    assembly {
      if iszero(or(iszero(b), iszero(gt(a, div(sub(not(0), HALF_WAD), b))))) {
        revert(0, 0)
      }

      c := div(add(mul(a, b), HALF_WAD), WAD)
    }
  }

  /**
   * @dev Divides two wad, rounding half up to the nearest wad
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Wad
   * @param b Wad
   * @return c = a/b, in wad
   */
  function wadDiv(uint256 a, uint256 b) internal pure returns (uint256 c) {
    // to avoid overflow, a <= (type(uint256).max - halfB) / WAD
    assembly {
      if or(iszero(b), iszero(iszero(gt(a, div(sub(not(0), div(b, 2)), WAD))))) {
        revert(0, 0)
      }

      c := div(add(mul(a, WAD), div(b, 2)), b)
    }
  }

  /**
   * @notice Multiplies two ray, rounding half up to the nearest ray
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Ray
   * @param b Ray
   * @return c = a raymul b
   */
  function rayMul(uint256 a, uint256 b) internal pure returns (uint256 c) {
    // to avoid overflow, a <= (type(uint256).max - HALF_RAY) / b
    assembly {
      if iszero(or(iszero(b), iszero(gt(a, div(sub(not(0), HALF_RAY), b))))) {
        revert(0, 0)
      }

      c := div(add(mul(a, b), HALF_RAY), RAY)
    }
  }

  /**
   * @notice Divides two ray, rounding half up to the nearest ray
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Ray
   * @param b Ray
   * @return c = a raydiv b
   */
  function rayDiv(uint256 a, uint256 b) internal pure returns (uint256 c) {
    // to avoid overflow, a <= (type(uint256).max - halfB) / RAY
    assembly {
      if or(iszero(b), iszero(iszero(gt(a, div(sub(not(0), div(b, 2)), RAY))))) {
        revert(0, 0)
      }

      c := div(add(mul(a, RAY), div(b, 2)), b)
    }
  }

  /**
   * @dev Casts ray down to wad
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Ray
   * @return b = a converted to wad, rounded half up to the nearest wad
   */
  function rayToWad(uint256 a) internal pure returns (uint256 b) {
    assembly {
      b := div(a, WAD_RAY_RATIO)
      let remainder := mod(a, WAD_RAY_RATIO)
      if iszero(lt(remainder, div(WAD_RAY_RATIO, 2))) {
        b := add(b, 1)
      }
    }
  }

  /**
   * @dev Converts wad up to ray
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Wad
   * @return b = a converted in ray
   */
  function wadToRay(uint256 a) internal pure returns (uint256 b) {
    // to avoid overflow, b/WAD_RAY_RATIO == a
    assembly {
      b := mul(a, WAD_RAY_RATIO)

      if iszero(eq(div(b, WAD_RAY_RATIO), a)) {
        revert(0, 0)
      }
    }
  }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

library DataTypes {
  /**
   * This exists specifically to maintain the `getReserveData()` interface, since the new, internal
   * `ReserveData` struct includes the reserve's `virtualUnderlyingBalance`.
   */
  struct ReserveDataLegacy {
    //stores the reserve configuration
    ReserveConfigurationMap configuration;
    //the liquidity index. Expressed in ray
    uint128 liquidityIndex;
    //the current supply rate. Expressed in ray
    uint128 currentLiquidityRate;
    //variable borrow index. Expressed in ray
    uint128 variableBorrowIndex;
    //the current variable borrow rate. Expressed in ray
    uint128 currentVariableBorrowRate;
    // DEPRECATED on v3.2.0
    uint128 currentStableBorrowRate;
    //timestamp of last update
    uint40 lastUpdateTimestamp;
    //the id of the reserve. Represents the position in the list of the active reserves
    uint16 id;
    //aToken address
    address aTokenAddress;
    // DEPRECATED on v3.2.0
    address stableDebtTokenAddress;
    //variableDebtToken address
    address variableDebtTokenAddress;
    //address of the interest rate strategy
    address interestRateStrategyAddress;
    //the current treasury balance, scaled
    uint128 accruedToTreasury;
    //the outstanding unbacked aTokens minted through the bridging feature
    uint128 unbacked;
    //the outstanding debt borrowed against this asset in isolation mode
    uint128 isolationModeTotalDebt;
  }

  struct ReserveData {
    //stores the reserve configuration
    ReserveConfigurationMap configuration;
    //the liquidity index. Expressed in ray
    uint128 liquidityIndex;
    //the current supply rate. Expressed in ray
    uint128 currentLiquidityRate;
    //variable borrow index. Expressed in ray
    uint128 variableBorrowIndex;
    //the current variable borrow rate. Expressed in ray
    uint128 currentVariableBorrowRate;
    /// @notice reused `__deprecatedStableBorrowRate` storage from pre 3.2
    // the current accumulate deficit in underlying tokens
    uint128 deficit;
    //timestamp of last update
    uint40 lastUpdateTimestamp;
    //the id of the reserve. Represents the position in the list of the active reserves
    uint16 id;
    //timestamp until when liquidations are not allowed on the reserve, if set to past liquidations will be allowed
    uint40 liquidationGracePeriodUntil;
    //aToken address
    address aTokenAddress;
    // DEPRECATED on v3.2.0
    address __deprecatedStableDebtTokenAddress;
    //variableDebtToken address
    address variableDebtTokenAddress;
    //address of the interest rate strategy
    address interestRateStrategyAddress;
    //the current treasury balance, scaled
    uint128 accruedToTreasury;
    //the outstanding unbacked aTokens minted through the bridging feature
    uint128 unbacked;
    //the outstanding debt borrowed against this asset in isolation mode
    uint128 isolationModeTotalDebt;
    //the amount of underlying accounted for by the protocol
    uint128 virtualUnderlyingBalance;
  }

  struct ReserveConfigurationMap {
    //bit 0-15: LTV
    //bit 16-31: Liq. threshold
    //bit 32-47: Liq. bonus
    //bit 48-55: Decimals
    //bit 56: reserve is active
    //bit 57: reserve is frozen
    //bit 58: borrowing is enabled
    //bit 59: DEPRECATED: stable rate borrowing enabled
    //bit 60: asset is paused
    //bit 61: borrowing in isolation mode is enabled
    //bit 62: siloed borrowing enabled
    //bit 63: flashloaning enabled
    //bit 64-79: reserve factor
    //bit 80-115: borrow cap in whole tokens, borrowCap == 0 => no cap
    //bit 116-151: supply cap in whole tokens, supplyCap == 0 => no cap
    //bit 152-167: liquidation protocol fee
    //bit 168-175: DEPRECATED: eMode category
    //bit 176-211: unbacked mint cap in whole tokens, unbackedMintCap == 0 => minting disabled
    //bit 212-251: debt ceiling for isolation mode with (ReserveConfiguration::DEBT_CEILING_DECIMALS) decimals
    //bit 252: virtual accounting is enabled for the reserve
    //bit 253-255 unused

    uint256 data;
  }

  struct UserConfigurationMap {
    /**
     * @dev Bitmap of the users collaterals and borrows. It is divided in pairs of bits, one pair per asset.
     * The first bit indicates if an asset is used as collateral by the user, the second whether an
     * asset is borrowed by the user.
     */
    uint256 data;
  }

  // DEPRECATED: kept for backwards compatibility, might be removed in a future version
  struct EModeCategoryLegacy {
    // each eMode category has a custom ltv and liquidation threshold
    uint16 ltv;
    uint16 liquidationThreshold;
    uint16 liquidationBonus;
    // DEPRECATED
    address priceSource;
    string label;
  }

  struct CollateralConfig {
    uint16 ltv;
    uint16 liquidationThreshold;
    uint16 liquidationBonus;
  }

  struct EModeCategoryBaseConfiguration {
    uint16 ltv;
    uint16 liquidationThreshold;
    uint16 liquidationBonus;
    string label;
  }

  struct EModeCategory {
    // each eMode category has a custom ltv and liquidation threshold
    uint16 ltv;
    uint16 liquidationThreshold;
    uint16 liquidationBonus;
    uint128 collateralBitmap;
    string label;
    uint128 borrowableBitmap;
  }

  enum InterestRateMode {
    NONE,
    __DEPRECATED,
    VARIABLE
  }

  struct ReserveCache {
    uint256 currScaledVariableDebt;
    uint256 nextScaledVariableDebt;
    uint256 currLiquidityIndex;
    uint256 nextLiquidityIndex;
    uint256 currVariableBorrowIndex;
    uint256 nextVariableBorrowIndex;
    uint256 currLiquidityRate;
    uint256 currVariableBorrowRate;
    uint256 reserveFactor;
    ReserveConfigurationMap reserveConfiguration;
    address aTokenAddress;
    address variableDebtTokenAddress;
    uint40 reserveLastUpdateTimestamp;
  }

  struct ExecuteLiquidationCallParams {
    uint256 reservesCount;
    uint256 debtToCover;
    address collateralAsset;
    address debtAsset;
    address user;
    bool receiveAToken;
    address priceOracle;
    uint8 userEModeCategory;
    address priceOracleSentinel;
  }

  struct ExecuteSupplyParams {
    address asset;
    uint256 amount;
    address onBehalfOf;
    uint16 referralCode;
  }

  struct ExecuteBorrowParams {
    address asset;
    address user;
    address onBehalfOf;
    uint256 amount;
    InterestRateMode interestRateMode;
    uint16 referralCode;
    bool releaseUnderlying;
    uint256 reservesCount;
    address oracle;
    uint8 userEModeCategory;
    address priceOracleSentinel;
  }

  struct ExecuteRepayParams {
    address asset;
    uint256 amount;
    InterestRateMode interestRateMode;
    address onBehalfOf;
    bool useATokens;
  }

  struct ExecuteWithdrawParams {
    address asset;
    uint256 amount;
    address to;
    uint256 reservesCount;
    address oracle;
    uint8 userEModeCategory;
  }

  struct ExecuteEliminateDeficitParams {
    address asset;
    uint256 amount;
  }

  struct ExecuteSetUserEModeParams {
    uint256 reservesCount;
    address oracle;
    uint8 categoryId;
  }

  struct FinalizeTransferParams {
    address asset;
    address from;
    address to;
    uint256 amount;
    uint256 balanceFromBefore;
    uint256 balanceToBefore;
    uint256 reservesCount;
    address oracle;
    uint8 fromEModeCategory;
  }

  struct FlashloanParams {
    address receiverAddress;
    address[] assets;
    uint256[] amounts;
    uint256[] interestRateModes;
    address onBehalfOf;
    bytes params;
    uint16 referralCode;
    uint256 flashLoanPremiumToProtocol;
    uint256 flashLoanPremiumTotal;
    uint256 reservesCount;
    address addressesProvider;
    address pool;
    uint8 userEModeCategory;
    bool isAuthorizedFlashBorrower;
  }

  struct FlashloanSimpleParams {
    address receiverAddress;
    address asset;
    uint256 amount;
    bytes params;
    uint16 referralCode;
    uint256 flashLoanPremiumToProtocol;
    uint256 flashLoanPremiumTotal;
  }

  struct FlashLoanRepaymentParams {
    uint256 amount;
    uint256 totalPremium;
    uint256 flashLoanPremiumToProtocol;
    address asset;
    address receiverAddress;
    uint16 referralCode;
  }

  struct CalculateUserAccountDataParams {
    UserConfigurationMap userConfig;
    uint256 reservesCount;
    address user;
    address oracle;
    uint8 userEModeCategory;
  }

  struct ValidateBorrowParams {
    ReserveCache reserveCache;
    UserConfigurationMap userConfig;
    address asset;
    address userAddress;
    uint256 amount;
    InterestRateMode interestRateMode;
    uint256 reservesCount;
    address oracle;
    uint8 userEModeCategory;
    address priceOracleSentinel;
    bool isolationModeActive;
    address isolationModeCollateralAddress;
    uint256 isolationModeDebtCeiling;
  }

  struct ValidateLiquidationCallParams {
    ReserveCache debtReserveCache;
    uint256 totalDebt;
    uint256 healthFactor;
    address priceOracleSentinel;
  }

  struct CalculateInterestRatesParams {
    uint256 unbacked;
    uint256 liquidityAdded;
    uint256 liquidityTaken;
    uint256 totalDebt;
    uint256 reserveFactor;
    address reserve;
    bool usingVirtualBalance;
    uint256 virtualUnderlyingBalance;
  }

  struct InitReserveParams {
    address asset;
    address aTokenAddress;
    address variableDebtAddress;
    address interestRateStrategyAddress;
    uint16 reservesCount;
    uint16 maxNumberReserves;
  }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.10;

import {Context} from '../../../dependencies/openzeppelin/contracts/Context.sol';
import {IERC20} from '../../../dependencies/openzeppelin/contracts/IERC20.sol';
import {IERC20Detailed} from '../../../dependencies/openzeppelin/contracts/IERC20Detailed.sol';
import {SafeCast} from '../../../dependencies/openzeppelin/contracts/SafeCast.sol';
import {WadRayMath} from '../../libraries/math/WadRayMath.sol';
import {Errors} from '../../libraries/helpers/Errors.sol';
import {IAaveIncentivesController} from '../../../interfaces/IAaveIncentivesController.sol';
import {IPoolAddressesProvider} from '../../../interfaces/IPoolAddressesProvider.sol';
import {IPool} from '../../../interfaces/IPool.sol';
import {IACLManager} from '../../../interfaces/IACLManager.sol';

/**
 * @title IncentivizedERC20
 * @author Aave, inspired by the Openzeppelin ERC20 implementation
 * @notice Basic ERC20 implementation
 */
abstract contract IncentivizedERC20 is Context, IERC20Detailed {
  using WadRayMath for uint256;
  using SafeCast for uint256;

  /**
   * @dev Only pool admin can call functions marked by this modifier.
   */
  modifier onlyPoolAdmin() {
    IACLManager aclManager = IACLManager(_addressesProvider.getACLManager());
    require(aclManager.isPoolAdmin(msg.sender), Errors.CALLER_NOT_POOL_ADMIN);
    _;
  }

  /**
   * @dev Only pool can call functions marked by this modifier.
   */
  modifier onlyPool() {
    require(_msgSender() == address(POOL), Errors.CALLER_MUST_BE_POOL);
    _;
  }

  /**
   * @dev UserState - additionalData is a flexible field.
   * ATokens and VariableDebtTokens use this field store the index of the
   * user's last supply/withdrawal/borrow/repayment.
   */
  struct UserState {
    uint128 balance;
    uint128 additionalData;
  }
  // Map of users address and their state data (userAddress => userStateData)
  mapping(address => UserState) internal _userState;

  // Map of allowances (delegator => delegatee => allowanceAmount)
  mapping(address => mapping(address => uint256)) private _allowances;

  uint256 internal _totalSupply;
  string private _name;
  string private _symbol;
  uint8 private _decimals;
  IAaveIncentivesController internal _incentivesController;
  IPoolAddressesProvider internal immutable _addressesProvider;
  IPool public immutable POOL;

  /**
   * @dev Constructor.
   * @param pool The reference to the main Pool contract
   * @param name_ The name of the token
   * @param symbol_ The symbol of the token
   * @param decimals_ The number of decimals of the token
   */
  constructor(IPool pool, string memory name_, string memory symbol_, uint8 decimals_) {
    _addressesProvider = pool.ADDRESSES_PROVIDER();
    _name = name_;
    _symbol = symbol_;
    _decimals = decimals_;
    POOL = pool;
  }

  /// @inheritdoc IERC20Detailed
  function name() public view override returns (string memory) {
    return _name;
  }

  /// @inheritdoc IERC20Detailed
  function symbol() external view override returns (string memory) {
    return _symbol;
  }

  /// @inheritdoc IERC20Detailed
  function decimals() external view override returns (uint8) {
    return _decimals;
  }

  /// @inheritdoc IERC20
  function totalSupply() public view virtual override returns (uint256) {
    return _totalSupply;
  }

  /// @inheritdoc IERC20
  function balanceOf(address account) public view virtual override returns (uint256) {
    return _userState[account].balance;
  }

  /**
   * @notice Returns the address of the Incentives Controller contract
   * @return The address of the Incentives Controller
   */
  function getIncentivesController() external view virtual returns (IAaveIncentivesController) {
    return _incentivesController;
  }

  /**
   * @notice Sets a new Incentives Controller
   * @param controller the new Incentives controller
   */
  function setIncentivesController(IAaveIncentivesController controller) external onlyPoolAdmin {
    _incentivesController = controller;
  }

  /// @inheritdoc IERC20
  function transfer(address recipient, uint256 amount) external virtual override returns (bool) {
    uint128 castAmount = amount.toUint128();
    _transfer(_msgSender(), recipient, castAmount);
    return true;
  }

  /// @inheritdoc IERC20
  function allowance(
    address owner,
    address spender
  ) external view virtual override returns (uint256) {
    return _allowances[owner][spender];
  }

  /// @inheritdoc IERC20
  function approve(address spender, uint256 amount) external virtual override returns (bool) {
    _approve(_msgSender(), spender, amount);
    return true;
  }

  /// @inheritdoc IERC20
  function transferFrom(
    address sender,
    address recipient,
    uint256 amount
  ) external virtual override returns (bool) {
    uint128 castAmount = amount.toUint128();
    _approve(sender, _msgSender(), _allowances[sender][_msgSender()] - castAmount);
    _transfer(sender, recipient, castAmount);
    return true;
  }

  /**
   * @notice Increases the allowance of spender to spend _msgSender() tokens
   * @param spender The user allowed to spend on behalf of _msgSender()
   * @param addedValue The amount being added to the allowance
   * @return `true`
   */
  function increaseAllowance(address spender, uint256 addedValue) external virtual returns (bool) {
    _approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
    return true;
  }

  /**
   * @notice Decreases the allowance of spender to spend _msgSender() tokens
   * @param spender The user allowed to spend on behalf of _msgSender()
   * @param subtractedValue The amount being subtracted to the allowance
   * @return `true`
   */
  function decreaseAllowance(
    address spender,
    uint256 subtractedValue
  ) external virtual returns (bool) {
    _approve(_msgSender(), spender, _allowances[_msgSender()][spender] - subtractedValue);
    return true;
  }

  /**
   * @notice Transfers tokens between two users and apply incentives if defined.
   * @param sender The source address
   * @param recipient The destination address
   * @param amount The amount getting transferred
   */
  function _transfer(address sender, address recipient, uint128 amount) internal virtual {
    uint128 oldSenderBalance = _userState[sender].balance;
    _userState[sender].balance = oldSenderBalance - amount;
    uint128 oldRecipientBalance = _userState[recipient].balance;
    _userState[recipient].balance = oldRecipientBalance + amount;

    IAaveIncentivesController incentivesControllerLocal = _incentivesController;
    if (address(incentivesControllerLocal) != address(0)) {
      uint256 currentTotalSupply = _totalSupply;
      incentivesControllerLocal.handleAction(sender, currentTotalSupply, oldSenderBalance);
      if (sender != recipient) {
        incentivesControllerLocal.handleAction(recipient, currentTotalSupply, oldRecipientBalance);
      }
    }
  }

  /**
   * @notice Approve `spender` to use `amount` of `owner`s balance
   * @param owner The address owning the tokens
   * @param spender The address approved for spending
   * @param amount The amount of tokens to approve spending of
   */
  function _approve(address owner, address spender, uint256 amount) internal virtual {
    _allowances[owner][spender] = amount;
    emit Approval(owner, spender, amount);
  }

  /**
   * @notice Update the name of the token
   * @param newName The new name for the token
   */
  function _setName(string memory newName) internal {
    _name = newName;
  }

  /**
   * @notice Update the symbol for the token
   * @param newSymbol The new symbol for the token
   */
  function _setSymbol(string memory newSymbol) internal {
    _symbol = newSymbol;
  }

  /**
   * @notice Update the number of decimals for the token
   * @param newDecimals The new number of decimals for the token
   */
  function _setDecimals(uint8 newDecimals) internal {
    _decimals = newDecimals;
  }
}

{
  "remappings": [
    "solidity-utils/=lib/solidity-utils/src/",
    "forge-std/=lib/forge-std/src/",
    "ds-test/=lib/forge-std/lib/ds-test/src/",
    "openzeppelin-contracts-upgradeable/=lib/solidity-utils/lib/openzeppelin-contracts-upgradeable/",
    "openzeppelin-contracts/=lib/solidity-utils/lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/",
    "@openzeppelin/contracts-upgradeable/=lib/solidity-utils/lib/openzeppelin-contracts-upgradeable/contracts/",
    "@openzeppelin/contracts/=lib/solidity-utils/lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/",
    "erc4626-tests/=lib/solidity-utils/lib/openzeppelin-contracts-upgradeable/lib/erc4626-tests/",
    "halmos-cheatcodes/=lib/solidity-utils/lib/openzeppelin-contracts-upgradeable/lib/halmos-cheatcodes/src/"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "metadata": {
    "useLiteralContent": false,
    "bytecodeHash": "none",
    "appendCBOR": true
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "shanghai",
  "viaIR": false,
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"reserve","type":"address"},{"indexed":false,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"address","name":"onBehalfOf","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"},{"indexed":false,"internalType":"enum DataTypes.InterestRateMode","name":"interestRateMode","type":"uint8"},{"indexed":false,"internalType":"uint256","name":"borrowRate","type":"uint256"},{"indexed":true,"internalType":"uint16","name":"referralCode","type":"uint16"}],"name":"Borrow","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"asset","type":"address"},{"indexed":false,"internalType":"uint256","name":"totalDebt","type":"uint256"}],"name":"IsolationModeTotalDebtUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"asset","type":"address"},{"indexed":false,"internalType":"uint256","name":"totalDebt","type":"uint256"}],"name":"IsolationModeTotalDebtUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"reserve","type":"address"},{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"address","name":"repayer","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"},{"indexed":false,"internalType":"bool","name":"useATokens","type":"bool"}],"name":"Repay","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"reserve","type":"address"},{"indexed":false,"internalType":"uint256","name":"liquidityRate","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"stableBorrowRate","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"variableBorrowRate","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"liquidityIndex","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"variableBorrowIndex","type":"uint256"}],"name":"ReserveDataUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"reserve","type":"address"},{"indexed":true,"internalType":"address","name":"user","type":"address"}],"name":"ReserveUsedAsCollateralDisabled","type":"event"}]

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